Hello,
I'm trying to get firewalld going on Debian 12. I'm getting a python
error and I've seen it on google searches but not found a resolution.
Any suggestions welcome. Here's the complete log.
Thanks.
Dave.
root@hostname:/etc/ssh#cat /etc/debian_version
12.0
root@hostname:~#apt install firewalld
Reading package lists... 0%Reading package lists... 100%Reading
package lists... Done
Building dependency tree... 0%Building dependency tree... 0%Building
dependency tree... 50%Building dependency tree... 50%Building
dependency tree... Done
Reading state information... 0% Reading state information... 0%Reading
state information... Done
The following additional packages will be installed:
gir1.2-nm-1.0 ipset iptables libipset13 libnftables1 libnm0 nftables
python3-attr python3-cap-ng python3-firewall python3-idna
python3-json-pointer python3-jsonschema python3-nftables
python3-pyrsistent python3-rfc3987 python3-uritemplate python3-webcolors
Suggested packages:
python-attr-doc python-jsonschema-doc
The following NEW packages will be installed:
firewalld gir1.2-nm-1.0 ipset iptables libipset13 libnftables1 libnm0
nftables python3-attr python3-cap-ng python3-firewall python3-idna
python3-json-pointer python3-jsonschema python3-nftables
python3-pyrsistent python3-rfc3987 python3-uritemplate python3-webcolors
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 2171 kB of archives.
After this operation, 11.4 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
0% [Working] Get:1 https://ftp.debian.org/debian
bookworm-proposed-updates/main amd64 libnftables1 amd64
1.0.6-2+deb12u1 [298 kB]
0% [1 libnftables1 0 B/298 kB 0%] 12%
[Working] Get:2 https://ftp.debian.org/debian
bookworm-proposed-updates/main amd64 nftables amd64 1.0.6-2+deb12u1
[70.1 kB]
12% [2 nftables 0 B/70.1 kB 0%] 16%
[Working] Get:3 https://ftp.debian.org/debian
bookworm/main amd64 libnm0 amd64 1.42.4-1 [436 kB]
16% [3 libnm0 0 B/436 kB 0%] 33% [Working]
Get:4 https://ftp.debian.org/debian bookworm/main amd64
gir1.2-nm-1.0 amd64 1.42.4-1 [77.3 kB]
33% [4 gir1.2-nm-1.0 16.4 kB/77.3 kB 21%]
37% [Working] Get:5
https://ftp.debian.org/debian bookworm/main amd64 python3-attr all
22.2.0-1 [65.4 kB]
37% [5 python3-attr 3928 B/65.4 kB 6%]
40% [Working] Get:6 https://ftp.debian.org/debian
bookworm/main amd64 python3-pyrsistent amd64 0.18.1-1+b3 [60.0 kB]
40% [6 python3-pyrsistent 0 B/60.0 kB 0%]
43% [Waiting for headers] Get:7
https://ftp.debian.org/debian bookworm/main amd64 python3-jsonschema
all 4.10.3-1 [67.9 kB]
43% [7 python3-jsonschema 0 B/67.9 kB 0%]
47% [Working] Get:8
https://ftp.debian.org/debian bookworm-proposed-updates/main amd64
python3-nftables amd64 1.0.6-2+deb12u1 [15.3 kB]
47% [8 python3-nftables 0 B/15.3 kB 0%]
49% [Waiting for headers] Get:9
https://ftp.debian.org/debian bookworm/main amd64 python3-firewall all
1.3.0-1 [131 kB]
49% [9 python3-firewall 0 B/131 kB 0%]
54% [Waiting for headers] Get:10
https://ftp.debian.org/debian bookworm/main amd64 firewalld all
1.3.0-1 [368 kB]
54% [10 firewalld 0 B/368 kB 0%] 69%
[Working] Get:11 https://ftp.debian.org/debian
bookworm/main amd64 libipset13 amd64 7.17-1 [67.5 kB]
71% [11 libipset13 41.4 kB/67.5 kB 61%]
73% [Working] Get:12 https://ftp.debian.org/debian
bookworm/main amd64 ipset amd64 7.17-1 [45.7 kB]
73% [12 ipset 16.4 kB/45.7 kB 36%]
75% [Working] Get:13 https://ftp.debian.org/debian
bookworm/main amd64 iptables amd64 1.8.9-2 [360 kB]
75% [13 iptables 0 B/360 kB 0%] 90%
[Working] Get:14 https://ftp.debian.org/debian
bookworm/main amd64 python3-cap-ng amd64 0.8.3-1+b3 [21.5 kB]
90% [14 python3-cap-ng 0 B/21.5 kB 0%]
92% [Working] Get:15 https://ftp.debian.org/debian
bookworm/main amd64 python3-idna all 3.3-1 [39.4 kB]
92% [15 python3-idna 0 B/39.4 kB 0%]
94% [Working] Get:16 https://ftp.debian.org/debian
bookworm/main amd64 python3-json-pointer all 2.3-2 [15.1 kB]
94% [16 python3-json-pointer 0 B/15.1 kB 0%]
96% [Working] Get:17
https://ftp.debian.org/debian bookworm/main amd64 python3-rfc3987 all
1.3.8-2 [8816 B]
96% [17 python3-rfc3987 8816 B/8816 B 100%]
97% [Waiting for headers]
Get:18 https://ftp.debian.org/debian bookworm/main amd64
python3-uritemplate all 4.1.1-2 [10.9 kB]
97% [18 python3-uritemplate 10.9 kB/10.9 kB 100%]
98% [Working] Get:19
https://ftp.debian.org/debian bookworm/main amd64 python3-webcolors
all 1.11.1-1 [12.7 kB]
98% [19 python3-webcolors 0 B/12.7 kB 0%]
100% [Working] Fetched 2171 kB in 1s (3304
kB/s)
Selecting previously unselected package libnftables1:amd64.
(Reading database ... (Reading database ... 5%(Reading database ...
10%(Reading database ... 15%(Reading database ... 20%(Reading database
... 25%(Reading database ... 30%(Reading database ... 35%(Reading
database ... 40%(Reading database ... 45%(Reading database ...
50%(Reading database ... 55%(Reading database ... 60%(Reading database
... 65%(Reading database ... 70%(Reading database ... 75%(Reading
database ... 80%(Reading database ... 85%(Reading database ...
90%(Reading database ... 95%(Reading database ... 100%(Reading
database ... 37406 files and directories currently installed.)
Preparing to unpack .../00-libnftables1_1.0.6-2+deb12u1_amd64.deb ...
Progress: [ 0%]
[.......................................................] Progress: [
1%] [.......................................................]
Unpacking libnftables1:amd64 (1.0.6-2+deb12u1) ...
Progress: [ 3%]
[#......................................................] Selecting
previously unselected package nftables.
Preparing to unpack .../01-nftables_1.0.6-2+deb12u1_amd64.deb ...
Progress: [ 4%]
[##.....................................................] Unpacking
nftables (1.0.6-2+deb12u1) ...
Progress: [ 5%]
[##.....................................................] Selecting
previously unselected package libnm0:amd64.
Preparing to unpack .../02-libnm0_1.42.4-1_amd64.deb ...
Progress: [ 6%]
[###....................................................] Unpacking
libnm0:amd64 (1.42.4-1) ...
Progress: [ 8%]
[####...................................................] Selecting
previously unselected package gir1.2-nm-1.0:amd64.
Preparing to unpack .../03-gir1.2-nm-1.0_1.42.4-1_amd64.deb ...
Progress: [ 9%]
[#####..................................................] Unpacking
gir1.2-nm-1.0:amd64 (1.42.4-1) ...
Progress: [ 10%]
[#####..................................................] Selecting
previously unselected package python3-attr.
Preparing to unpack .../04-python3-attr_22.2.0-1_all.deb ...
Progress: [ 12%]
[######.................................................] Unpacking
python3-attr (22.2.0-1) ...
Progress: [ 13%]
[#######................................................] Selecting
previously unselected package python3-pyrsistent:amd64.
Preparing to unpack .../05-python3-pyrsistent_0.18.1-1+b3_amd64.deb ...
Progress: [ 14%]
[#######................................................] Unpacking
python3-pyrsistent:amd64 (0.18.1-1+b3) ...
Progress: [ 16%]
[########...............................................] Selecting
previously unselected package python3-jsonschema.
Preparing to unpack .../06-python3-jsonschema_4.10.3-1_all.deb ...
Progress: [ 17%]
[#########..............................................] Unpacking
python3-jsonschema (4.10.3-1) ...
Progress: [ 18%]
[##########.............................................] Selecting
previously unselected package python3-nftables.
Preparing to unpack .../07-python3-nftables_1.0.6-2+deb12u1_amd64.deb ...
Progress: [ 19%]
[##########.............................................] Unpacking
python3-nftables (1.0.6-2+deb12u1) ...
Progress: [ 21%]
[###########............................................] Selecting
previously unselected package python3-firewall.
Preparing to unpack .../08-python3-firewall_1.3.0-1_all.deb ...
Progress: [ 22%]
[############...........................................] Unpacking
python3-firewall (1.3.0-1) ...
Progress: [ 23%]
[############...........................................] Selecting
previously unselected package firewalld.
Preparing to unpack .../09-firewalld_1.3.0-1_all.deb ...
Progress: [ 25%]
[#############..........................................] Unpacking
firewalld (1.3.0-1) ...
Progress: [ 26%]
[##############.........................................] Selecting
previously unselected package libipset13:amd64.
Preparing to unpack .../10-libipset13_7.17-1_amd64.deb ...
Progress: [ 27%]
[###############........................................] Unpacking
libipset13:amd64 (7.17-1) ...
Progress: [ 29%]
[###############........................................] Selecting
previously unselected package ipset.
Preparing to unpack .../11-ipset_7.17-1_amd64.deb ...
Progress: [ 30%]
[################.......................................] Unpacking
ipset (7.17-1) ...
Progress: [ 31%]
[#################......................................] Selecting
previously unselected package iptables.
Preparing to unpack .../12-iptables_1.8.9-2_amd64.deb ...
Progress: [ 32%]
[#################......................................] Unpacking
iptables (1.8.9-2) ...
Progress: [ 34%]
[##################.....................................] Selecting
previously unselected package python3-cap-ng.
Preparing to unpack .../13-python3-cap-ng_0.8.3-1+b3_amd64.deb ...
Progress: [ 35%]
[###################....................................] Unpacking
python3-cap-ng (0.8.3-1+b3) ...
Progress: [ 36%]
[####################...................................] Selecting
previously unselected package python3-idna.
Preparing to unpack .../14-python3-idna_3.3-1_all.deb ...
Progress: [ 38%]
[####################...................................] Unpacking
python3-idna (3.3-1) ...
Progress: [ 39%]
[#####################..................................] Selecting
previously unselected package python3-json-pointer.
Preparing to unpack .../15-python3-json-pointer_2.3-2_all.deb ...
Progress: [ 40%]
[######################.................................] Unpacking
python3-json-pointer (2.3-2) ...
Progress: [ 42%]
[######################.................................] Selecting
previously unselected package python3-rfc3987.
Preparing to unpack .../16-python3-rfc3987_1.3.8-2_all.deb ...
Progress: [ 43%]
[#######################................................] Unpacking
python3-rfc3987 (1.3.8-2) ...
Progress: [ 44%]
[########################...............................] Selecting
previously unselected package python3-uritemplate.
Preparing to unpack .../17-python3-uritemplate_4.1.1-2_all.deb ...
Progress: [ 45%]
[#########################..............................] Unpacking
python3-uritemplate (4.1.1-2) ...
Progress: [ 47%]
[#########################..............................] Selecting
previously unselected package python3-webcolors.
Preparing to unpack .../18-python3-webcolors_1.11.1-1_all.deb ...
Progress: [ 48%]
[##########################.............................] Unpacking
python3-webcolors (1.11.1-1) ...
Progress: [ 49%]
[###########################............................] Setting up
python3-attr (22.2.0-1) ...
Progress: [ 51%]
[###########################............................] Progress: [
52%] [############################...........................] Setting
up libnftables1:amd64 (1.0.6-2+deb12u1) ...
Progress: [ 53%]
[#############################..........................] Progress: [
55%] [##############################.........................] Setting
up nftables (1.0.6-2+deb12u1) ...
Progress: [ 56%]
[##############################.........................] Progress: [
57%] [###############################........................] Setting
up python3-cap-ng (0.8.3-1+b3) ...
Progress: [ 58%]
[################################.......................] Progress: [
60%] [################################.......................] Setting
up iptables (1.8.9-2) ...
Progress: [ 61%]
[#################################......................]
update-alternatives: using /usr/sbin/iptables-legacy to provide
/usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-legacy to provide
/usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/iptables-nft to provide
/usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-nft to provide
/usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/arptables-nft to provide
/usr/sbin/arptables (arptables) in auto mode
update-alternatives: using /usr/sbin/ebtables-nft to provide
/usr/sbin/ebtables (ebtables) in auto mode
Progress: [ 62%]
[##################################.....................] Setting up
python3-uritemplate (4.1.1-2) ...
Progress: [ 64%]
[###################################....................] Progress: [
65%] [###################################....................] Setting
up python3-firewall (1.3.0-1) ...
Progress: [ 66%]
[####################################...................] Progress: [
68%] [#####################################..................] Setting
up python3-webcolors (1.11.1-1) ...
Progress: [ 69%]
[#####################################..................] Progress: [
70%] [######################################.................] Setting
up python3-rfc3987 (1.3.8-2) ...
Progress: [ 71%]
[#######################################................] Progress: [
73%] [########################################...............] Setting
up python3-idna (3.3-1) ...
Progress: [ 74%]
[########################################...............] Progress: [
75%] [#########################################..............] Setting
up libnm0:amd64 (1.42.4-1) ...
Progress: [ 77%]
[##########################################.............] Progress: [
78%] [##########################################.............] Setting
up python3-pyrsistent:amd64 (0.18.1-1+b3) ...
Progress: [ 79%]
[###########################################............] Progress: [
81%] [############################################...........] Setting
up libipset13:amd64 (7.17-1) ...
Progress: [ 82%]
[#############################################..........] Progress: [
83%] [#############################################..........] Setting
up python3-json-pointer (2.3-2) ...
Progress: [ 84%]
[##############################################.........] Progress: [
86%] [###############################################........] Setting
up gir1.2-nm-1.0:amd64 (1.42.4-1) ...
Progress: [ 87%]
[###############################################........] Progress: [
88%] [################################################.......] Setting
up ipset (7.17-1) ...
Progress: [ 90%]
[#################################################......] Progress: [
91%] [##################################################.....] Setting
up python3-jsonschema (4.10.3-1) ...
Progress: [ 92%]
[##################################################.....] Progress: [
94%] [###################################################....] Setting
up python3-nftables (1.0.6-2+deb12u1) ...
Progress: [ 95%]
[####################################################...] Progress: [
96%] [####################################################...] Setting
up firewalld (1.3.0-1) ...
Progress: [ 97%]
[#####################################################..]
update-alternatives: using
/usr/share/polkit-1/actions/org.fedoraproject.FirewallD1.server.policy.choice
to provide /usr/share/polkit-1/actions/org.fedoraproject.FirewallD1.policy
(org.fedoraproject.FirewallD1.policy) in auto mode
Created symlink
/etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service ?
/lib/systemd/system/firewalld.service.
Created symlink
/etc/systemd/system/multi-user.target.wants/firewalld.service ?
/lib/systemd/system/firewalld.service.
Progress: [ 99%]
[######################################################.] Processing
triggers for man-db (2.11.2-2) ...
Processing triggers for dbus (1.14.8-1~deb12u1) ...
Processing triggers for libc-bin (2.36-9) ...
root@hostname:~#
root@hostname:~#systemctl status firewalld
? firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/lib/systemd/system/firewalld.service; enabled; preset:>
Active: inactive (dead) since Sat 2023-07-08 02:06:48 EDT; 16s ago
Duration: 2.316s
Docs: man:firewalld(1)
Process: 77366 ExecStart=/usr/sbin/firewalld --nofork --nopid (code=exit>
Main PID: 77366 (code=exited, status=0/SUCCESS)
Jul 08 02:06:48 hostname.example.com firewalld[77366]: ERROR: '/usr/sbin/e>
line 3: CHAIN_DEL f>
line 3: CHAIN_DEL f>
line 3: CHAIN_DEL f>
Jul 08 02:06:48 hostname.example.com firewalld[77366]: ERROR: 'python-nfta>
JSON blob:
{"nftables": [{"met>
Jul 08 02:06:48 hostname.example.com firewalld[77366]: ERROR: COMMAND_FAIL>
line 3: CHAIN_DEL f>
line 3: CHAIN_DEL f>
line 3: CHAIN_DEL f>