Hi guys,I need some help regarding this problem.Yesterday I upgraded from Wheezy to Jessie. Today I got an email saying the user could not create a "tmp" file to do anything.I checked the filesystem with:------------# df -hFilesystem Size Used Avail Use% Mounted on/dev/sda1 46G 46G 0 100% /udev 10M 0 10M 0% /devtmpfs 789M 82M 708M 11% /runtmpfs 2.0G 4.0K 2.0G 1% /dev/shmtmpfs 5.0M 4.0K 5.0M 1% /run/locktmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup/dev/sda3 864G 4.0G 816G 1% /hometmpfs 395M 0 395M 0% /run/user/1000tmpfs 395M 0 395M 0% /run/user/1340tmpfs 395M 0 395M 0% /run/user/1328tmpfs 395M 0 395M 0% /run/user/1360------------Also tried to find what was using such huge space with:------------# find / -xdev -type f -size +200M -exec ls -lh {} \;-rw-r----- 1 root adm 4.2G Jul 5 16:05 /var/log/messages-rw-r----- 1 root adm 5.6G Jul 5 16:05 /var/log/kern.log-rw-r----- 1 root adm 16G Jul 5 16:05 /var/log/syslog-rw-r----- 1 root adm 9.6G Jul 5 16:05 /var/log/daemon.log------------I'm not convinced that only 16G of syslog is my whole problem. But Id start with that, if I can make the system usable again. So I check the log just to see, over and over, this messages:------------1 Jul 5 15:35:58 beco kernel: [66691.859352] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'2 Jul 5 15:35:58 beco kernel: [66691.859358] rt2800pci 0000:03:00.0: firmware: failed to load rt2860.bin (-2)3 Jul 5 15:35:58 beco kernel: [66691.859359] rt2800pci 0000:03:00.0: Direct firmware load failed with error -24 Jul 5 15:35:58 beco kernel: [66691.859361] rt2800pci 0000:03:00.0: Falling back to user helper...Jul 5 15:35:58 beco systemd-udevd[16867]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/u dev_event': No such file or directory...24 Jul 5 15:35:58 beco wpa_supplicant[2357]: Could not set interface wlan0 flags (UP): Cannot allocate memory25 Jul 5 15:35:58 beco wpa_supplicant[2357]: nl80211: Could not set interface 'wlan0' UP26 Jul 5 15:35:58 beco wpa_supplicant[2357]: Could not set interface wlan0 flags (UP): Cannot allocate memory27 Jul 5 15:35:58 beco wpa_supplicant[2357]: WEXT: Could not set interface 'wlan0' UP28 Jul 5 15:35:58 beco wpa_supplicant[2357]: wlan0: Failed to initialize driver interface...30 Jul 5 15:35:58 beco NetworkManager[1812]: <error> [1436121358.001526] [supplicant-manager/nm-supplicant-interface.c:856] interface_add_cb(): (w lan0): error adding interface: wpa_supplicant couldn't grab this interface.31 Jul 5 15:35:58 beco NetworkManager[1812]: <info> (wlan0): supplicant interface state: starting -> down32 Jul 5 15:35:58 beco systemd-udevd[16870]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/u dev_event': No such file or directory...------------