multi-boot+grub2+separate boot partition
I wish to use grub2 to multi-boot the following systems:
=> Debian "stable" (Squeeze) on /dev/sda6
=> Debian "testing" (Wheezy) on /dev/sda7
=> Ubuntu (10.x) on /dev/sda8
This is a "work" machine and my primary interest is "stable". But I
need to become familiar with Wheezy, which is about to become
"stable". I am installing Ubuntu as a safety net, because Ubuntu
developers seem to find a way to get all of the peripheral devices
working, even if it the resulting configuration is non-standard.
I have read the Debian installation manual and I have searched with
Google, but thus far I have not found a HOWTO for such an arrangement
using a separate boot partition.
I plan to update "testing" from time to time. Once Wheezy becomes
"stable", I plan to drop Squeeze and install the new "testing". I may
even update Ubuntu.
It seemed to me that the proper approach would be to use a separate
boot partition on /dev/sda1, and to make it policy always to run
"update-grub" from "stable".
I instructed the Squeeze installer to install grub2 to /dev/sda1.
I instructed the Wheezy installer to install grub2 to /dev/sda7.
I instructed the Ubuntu installer to install grub2 to /dev/sda8.
I booted into Squeeze and executed "update-grub". The messages were:
=> found linux-image /boot/vmlnuz-2.6.32-5-686 (this is Squeeze)
=> found linux-image /boot/initrd-2.6.32-5-686 (this is Squeeze)
=> found Debian GNU/Linux (Wheezy/Sid) on /dev/sda7
=> Ubuntu 10.10 on /dev/sda8
But upon rebooting, the grub menu contains only entries for Squeeze
and Ubuntu.
Is it reasonable to use a separate boot partition? Can this scheme be
made to work?
RLH
Reply to: