Re: Server upgrade to wheezy failed
On Mon, 01 Oct 2012 10:12:35 -0400, Tom H wrote:
> On Mon, Oct 1, 2012 at 9:05 AM, Hendrik Boom <hendrik@topoi.pooq.com>
> wrote:
>> On Sat, 29 Sep 2012 21:52:04 +0000, Hendrik Boom wrote:
>>> On Sat, 29 Sep 2012 20:53:52 +0000, Hendrik Boom wrote:
>>>> On Sat, 29 Sep 2012 16:05:43 -0400, Tom H wrote:
>>>>>
>>>>> Not necessarily helpful to the OP and more for the record for other
>>>>> upgraders:
>>>>>
>>>>> The wheezy release notes recommend:
>>>>> apt-get upgrade apt-get install linux-image-<version>
>>>>> apt-get install udev [reboot]
>>>>> apt-get dist-upgrade
>>>>>
>>>>> I'd start by checking what versions of the kernel and udev are
>>>>> currently installed and running because the squeeze kernel isn't
>>>>> compatible with the wheezy udev.
>>>>
>>>> Yes. I figured that out. But I've discovered that at the [reboot]
>>>> step I managed to misbootd into the squeeze kernel with the wheezy
>>>> udev, so your analysis is dead on.
>>>>
>>>> I had even installed the wheezy kernel (version 3.0.something), but
>>>> even so, I find myself unable to boot it, as described in another
>>>> post in this thread.
>>>>
>>>>> Can the NIC(s) be brought up and the network enabled manually?
>>>
>>> I see. I should try ifconfig for this. Just saying
>>>
>>> ifconfig
>>>
>>> shows me no interfaces, but that just means they're down.
>>> I should try ifconfig -a, and it should show me the missing ones.
>>>
>>> And then
>>>
>>> ifconfig eth0 up ifconfig eth1 up
>>
>> And indeed, ifconfig eth0 up and ifconfig eth1 up did the trick.
>>
>> But it didn't solve the package dependency problems.
>>
>> Being unable to run the 3.x kernel has probably cause some system-level
>> packages to remain unconfigured.
>>
>> Even apt-get -f install didn't help. It fails on the first package it
>> tries to install.
>
> Do you have both of wheezy's kernel and udev packages installed are are
> you trying to boot the wheezy kernel with the squeeze udev?
I have both of wheezy's kernel and udev packages installed. When I
installed the wheezy kernel, it did not delete the squeeze kernel. I'dd
have to do that explicitly.
I cannot boot the wheezy kernel at all.
I can boot the squeeze kernel, but it doesn't work very well with the
wheezy udev, though it does limp along.
I have another partition somewhere else that contains an up-to-date
squeeze system. That one still works fine, and I am still using it for
production. I'd like to use wheezy for production.
-- hendrik
Reply to: