floppy drive in debian stable
Greetings,
I'm not subscribed to debian-user anymore, so would appreciate a CC on the response if someone has an idea about how to
solve the below.
I have a friend who has used debian GNU/linux (with the help of others) for many years. After his most recent upgrade
to stable, everything is working on his machine except his floppy drive. He has data on floppies (written from an old
DOS machine) that he wants to print. As I said, he's done this in the past (prior to this latest upgrade) without
trouble. He's now tried multiple different floppy disks. Below is some information directly from him. Anyone got any
ideas on what he needs to do in order to get /dev/fd0 to live again?
thanks so very much in advance,
~c
<pasted message w/info follows>
Here's what happens now:
I type mtfl and get:
mount: special device /dev/fd0 does not exist
Here's the contents of mtfl
#!/bin/bash
sudo mount -t vfat /dev/fd0 /media/floppy0
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704
(prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f4d70] 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6790, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF30C0, 4B6B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: APIC 1FFF7C40, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
[ 0.000000] Kernel command line: root=/dev/hda1 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2000.000 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 508996k/524224k available (1769k kernel code, 14596k reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4d3 - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4d3 (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084119] Calibrating delay using timer specific routine.. 4002.97 BogoMIPS (lpj=8005948)
[ 0.084226] Security Framework initialized
[ 0.084269] SELinux: Disabled at boot.
[ 0.084309] Capability LSM initialized
[ 0.084359] Mount-cache hash table entries: 512
[ 0.084511] Initializing cgroup subsys ns
[ 0.084552] Initializing cgroup subsys cpuacct
[ 0.084592] Initializing cgroup subsys devices
[ 0.084645] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084688] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084729] Intel machine check architecture supported.
[ 0.084771] Intel machine check reporting enabled on CPU#0.
[ 0.084820] Checking 'hlt' instruction... OK.
[ 0.100367] SMP alternatives: switching to UP code
[ 0.106679] Freeing SMP alternatives: 16k freed
[ 0.106721] ACPI: Core revision 20080321
[ 0.116340] ENABLING IO-APIC IRQs
[ 0.116549] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.156303] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a
[ 0.160010] Brought up 1 CPUs
[ 0.160010] Total of 1 processors activated (4002.97 BogoMIPS).
[ 0.160010] CPU0 attaching sched-domain:
[ 0.160010] domain 0: span 0
[ 0.160010] groups: 0
[ 0.160010] net_namespace: 660 bytes
[ 0.160010] Booting paravirtualized kernel on bare hardware
[ 0.160010] NET: Registered protocol family 16
[ 0.160010] ACPI: bus type pci registered
[ 0.188011] PCI: PCI BIOS revision 2.10 entry at 0xfb570, last bus=2
[ 0.188011] PCI: Using configuration type 1 for base access
[ 0.188011] Setting up standard PCI resources
[ 0.192012] ACPI: EC: Look up EC in DSDT
[ 0.195163] ACPI Error (dsobject-0501): Package List length (5) larger than NumElements count (3), truncated
[ 0.195244] [20080321]
[ 0.197731] ACPI: Interpreter enabled
[ 0.197771] ACPI: (supports S0 S1 S4 S5)
[ 0.197930] ACPI: Using IOAPIC for interrupt routing
[ 0.205887] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.206562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.206729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.206968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.246478] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.247025] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.247569] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.248118] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.248718] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.252067] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.252613] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.253156] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.253756] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.254357] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.254903] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.255504] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.256052] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.256599] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.257198] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.257797] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.258404] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.258978] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 0.259211] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.259444] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.259676] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 0.259938] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 0.260225] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.260589] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.260953] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 0.261344] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.261736] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.262099] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.262444] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 0.262724] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.263088] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.263480] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.263872] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.264275] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[ 0.264616] ACPI: Power Resource [ISAV] (on)
[ 0.264724] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.264788] pnp: PnP ACPI init
[ 0.264832] ACPI: bus type pnp registered
[ 0.269202] pnp: PnP ACPI: found 13 devices
[ 0.269243] ACPI: ACPI bus type pnp unregistered
[ 0.269284] PnPBIOS: Disabled by ACPI PNP
[ 0.269520] PCI: Using ACPI for IRQ routing
[ 0.269739] ACPI: RTC can wake from S4
[ 0.269797] system 00:00: ioport range 0x4000-0x407f has been reserved
[ 0.269839] system 00:00: ioport range 0x4080-0x40ff has been reserved
[ 0.269882] system 00:00: ioport range 0x4400-0x447f has been reserved
[ 0.269924] system 00:00: ioport range 0x4480-0x44ff has been reserved
[ 0.269966] system 00:00: ioport range 0x4800-0x487f has been reserved
[ 0.270008] system 00:00: ioport range 0x4880-0x48ff has been reserved
[ 0.270059] system 00:01: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.270101] system 00:01: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.270144] system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.270187] system 00:01: iomem range 0xfc000-0xfffff could not be reserved
[ 0.270230] system 00:01: iomem range 0x1fff0000-0x1fffffff could not be reserved
[ 0.270281] system 00:01: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.270332] system 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 0.271989] system 00:01: iomem range 0x100000-0x1ffeffff could not be reserved
[ 0.272043] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.272094] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.272145] system 00:01: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.272196] system 00:01: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.272239] system 00:01: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.272282] system 00:01: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.272328] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.272370] system 00:03: ioport range 0x800-0x805 has been reserved
[ 0.272412] system 00:03: ioport range 0x290-0x297 has been reserved
[ 0.302787] PCI: Bridge: 0000:00:0a.0
[ 0.302827] IO window: 8000-bfff
[ 0.302867] MEM window: 0xe2000000-0xe3ffffff
[ 0.302908] PREFETCH window: 0x0000000030000000-0x00000000300fffff
[ 0.302951] PCI: Bridge: 0000:00:0b.0
[ 0.302991] IO window: c000-cfff
[ 0.303032] MEM window: 0xe0000000-0xe1ffffff
[ 0.303073] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
[ 0.303122] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 0.303152] NET: Registered protocol family 2
[ 0.303270] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.303519] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.303680] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.303828] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.303870] TCP reno registered
[ 0.303966] NET: Registered protocol family 1
[ 0.304107] checking if image is initramfs... it is
[ 0.804027] Switched to high resolution mode on CPU 0
[ 0.826721] Freeing initrd memory: 6794k freed
[ 0.827347] audit: initializing netlink socket (disabled)
[ 0.827399] type=2000 audit(1307367908.824:1): initialized
[ 0.827529] Total HugeTLB memory allocated, 0
[ 0.827633] VFS: Disk quotas dquot_6.5.1
[ 0.827703] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.827778] msgmni has been set to 1007
[ 0.827909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.827960] io scheduler noop registered
[ 0.828000] io scheduler anticipatory registered
[ 0.828045] io scheduler deadline registered
[ 0.828094] io scheduler cfq registered (default)
[ 0.862890] pci 0000:02:00.0: Boot video device
[ 0.863141] isapnp: Scanning for PnP cards...
[ 1.214795] isapnp: No Plug & Play device found
[ 1.216182] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.216330] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.216463] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.216793] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.216966] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.217296] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.217342] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[ 1.217537] 0000:01:0a.0: ttyS2 at I/O 0xb400 (irq = 16) is a 16550A
[ 1.218681] brd: module loaded
[ 1.218787] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.218829] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.219580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.219715] mice: PS/2 mouse device common for all mice
[ 1.219844] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.219900] rtc0: alarms up to one year, y3k
[ 1.219964] cpuidle: using governor ladder
[ 1.220002] cpuidle: using governor menu
[ 1.220066] No iBFT detected.
[ 1.220557] TCP cubic registered
[ 1.220597] NET: Registered protocol family 17
[ 1.220640] Using IPI No-Shortcut mode
[ 1.220771] registered taskstats version 1
[ 1.220944] rtc_cmos 00:05: setting system clock to 2011-06-06 13:45:10 UTC (1307367910)
[ 1.221212] Freeing unused kernel memory: 244k freed
[ 1.245440] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.283375] usbcore: registered new interface driver usbfs
[ 1.283445] usbcore: registered new interface driver hub
[ 1.283507] usbcore: registered new device driver usb
[ 1.288479] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 1.288529] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 22
[ 1.288645] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 1.288648] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 1.288806] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.288879] ehci_hcd 0000:00:02.2: debug port 1
[ 1.288921] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 1.288933] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe4005000
[ 1.300047] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.300175] usb usb1: configuration #1 chosen from 1 choice
[ 1.300240] hub 1-0:1.0: USB hub found
[ 1.300285] hub 1-0:1.0: 6 ports detected
[ 1.301525] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.303546] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.303628] ACPI: Thermal Zone [THRM] (22 C)
[ 1.310615] ACPI: PNP0C0B:00 is registered as cooling_device1
[ 1.310664] ACPI: Fan [FAN] (on)
[ 1.368159] Uniform Multi-Platform E-IDE driver
[ 1.368206] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.372381] No dock devices found.
[ 1.378870] SCSI subsystem initialized
[ 1.386137] libata version 3.00 loaded.
[ 1.404215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.404262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404312] usb usb1: Product: EHCI Host Controller
[ 1.404353] usb usb1: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 1.404393] usb usb1: SerialNumber: 0000:00:02.2
[ 1.404527] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
[ 1.404570] NFORCE3-150: IDE controller (0x10de:0x00d5 rev 0xa5) at PCI slot 0000:00:08.0
[ 1.404709] NFORCE3-150: not 100% native mode: will probe irqs later
[ 1.404752] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.404808] ide0: BM-DMA at 0xf000-0xf007
[ 1.404853] ide1: BM-DMA at 0xf008-0xf00f
[ 1.404895] Probing IDE interface ide0...
[ 1.692092] hda: Maxtor 6Y080P0, ATA DISK drive
[ 2.364035] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.364151] hda: UDMA/133 mode selected
[ 2.364306] Probing IDE interface ide1...
[ 3.100089] hdc: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
[ 3.772023] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.772131] hdc: UDMA/33 mode selected
[ 3.772266] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.786894] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.786894] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.786894] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 3.786894] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
[ 3.786894] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 3.786894] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.786894] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.786894] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe4003000
[ 3.846073] usb usb2: configuration #1 chosen from 1 choice
[ 3.846144] hub 2-0:1.0: USB hub found
[ 3.846190] hub 2-0:1.0: 3 ports detected
[ 3.948085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.948128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.948178] usb usb2: Product: OHCI Host Controller
[ 3.948218] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[ 3.948259] usb usb2: SerialNumber: 0000:00:02.0
[ 3.948622] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[ 3.948668] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
[ 3.948785] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 3.948788] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 3.948851] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 3.948916] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4004000
[ 4.006057] usb usb3: configuration #1 chosen from 1 choice
[ 4.006122] hub 3-0:1.0: USB hub found
[ 4.006166] hub 3-0:1.0: 3 ports detected
[ 4.108073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.108117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.108167] usb usb3: Product: OHCI Host Controller
[ 4.108207] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[ 4.108248] usb usb3: SerialNumber: 0000:00:02.1
[ 4.108330] sata_via 0000:01:07.0: version 2.3
[ 4.108494] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 4.108538] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 4.108681] sata_via 0000:01:07.0: routed to hard irq line 11
[ 4.108787] scsi0 : sata_via
[ 4.108889] scsi1 : sata_via
[ 4.108952] ata1: SATA max UDMA/133 cmd 0x8400 ctl 0x8800 bmdma 0x9400 irq 17
[ 4.108994] ata2: SATA max UDMA/133 cmd 0x8c00 ctl 0x9000 bmdma 0x9408 irq 17
[ 4.312008] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.412008] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 4.516007] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.516253] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 4.516477] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 4.516522] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 4.516914] eth0: RTL8169s at 0xe0832000, 00:e0:4c:c5:80:89, XID 00800000 IRQ 18
[ 4.520489] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[ 4.573345] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[e3000000-e30007ff] Max Packet=[2048] IR/IT
contexts=[4/8]
[ 4.591136] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 4.591348] Uniform CD-ROM driver Revision: 3.20
[ 4.591968] hda: max request size: 128KiB
[ 4.593897] hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63
[ 4.595717] hda: cache flushes supported
[ 4.595790] hda: hda1
[ 4.677078] usb 3-2: configuration #1 chosen from 1 choice
[ 4.680013] usb 3-2: New USB device found, idVendor=046d, idProduct=c526
[ 4.680013] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.680013] usb 3-2: Product: USB Receiver
[ 4.680013] usb 3-2: Manufacturer: Logitech
[ 4.703760] usbcore: registered new interface driver hiddev
[ 4.708018] input: Logitech USB Receiver as /class/input/input1
[ 4.708018] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2
[ 4.720014] input: Logitech USB Receiver as /class/input/input2
[ 4.720014] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-2
[ 4.720014] usbcore: registered new interface driver usbhid
[ 4.720014] usbhid: v2.6:USB HID core driver
[ 4.847350] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 4.847880] SGI XFS Quota Management subsystem
[ 4.856644] XFS mounting filesystem hda1
[ 4.947237] Ending clean XFS mount for filesystem: hda1
[ 5.848094] ieee1394: Host added: ID:BUS[0-00:1023] GUID[003067000002a07b]
[ 7.442533] udev[602]: starting version 164
[ 8.071739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.088500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.292541] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 8.292602] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 8.354659] Linux agpgart interface v0.103
[ 8.364931] agpgart: Detected AGP bridge 0
[ 8.364996] agpgart: Setting up Nforce3 AGP.
[ 8.368675] agpgart: AGP aperture is 128M @ 0xd0000000
[ 8.385098] input: PC Speaker as /class/input/input3
[ 8.520987] input: Power Button (FF) as /class/input/input4
[ 8.538884] ACPI: Power Button (FF) [PWRF]
[ 8.538990] input: Power Button (CM) as /class/input/input5
[ 8.555064] ACPI: Power Button (CM) [PWRB]
[ 8.555172] input: Sleep Button (CM) as /class/input/input6
[ 8.571252] ACPI: Sleep Button (CM) [SLPB]
[ 8.696496] parport_pc 00:0b: reported by Plug and Play ACPI
[ 8.696496] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.264210] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 9.264210] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
[ 9.264210] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 9.588007] intel8x0_measure_ac97_clock: measured 54828 usecs
[ 9.588050] intel8x0: clocking to 47419
[ 11.203487] Driver 'sr' needs updating - please use bus_type methods
[ 11.264170] usbcore: registered new interface driver usblp
[ 11.440830] Initializing USB Mass Storage driver...
[ 11.440894] usbcore: registered new interface driver usb-storage
[ 11.440937] USB Mass Storage support registered.
[ 11.737273] fuse init (API version 7.9)
[ 13.957030] r8169: eth0: link up
[ 16.016001] NET: Registered protocol family 10
[ 16.016516] lo: Disabled Privacy Extensions
[ 20.527896] lp0: using parport0 (interrupt-driven).
[ 25.320315] ppdev: user-space parallel port driver
[ 26.988011] eth0: no IPv6 routers present
[ 122.014440] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 122.014440] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[ 122.081961] [drm] Initialized drm 1.1.0 20060810
[ 122.092718] radeon: Unknown parameter `modeset'
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
lspci
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80)
01:07.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 50)
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
01:0a.0 Communication controller: Agere Systems Venus Modem (V90, 56KFlex)
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda1 / xfs defaults 0 1
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/sda1 /media/usb0 auto rw,user,noauto 0 0
Reply to: