Re: Mach64 - Etch - Xorg & DRI
On Sun, 2007-04-01 at 13:01 -0400, cga2000 wrote:
> Has anybody gotten direct rendering to work with the legacy mach64 Rage
> Pro Mobility card .. with the etch version of Xorg?
>
> The ATI web site does not provide drivers for this antique so I'll have
> to use the one that's provided with Xorg.
>
> $ lspci
>
> [..] ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
Not under X.org (or Xfree) using their native drivers. I haven't used
this in a looooong time, but as far as I know you need to install the
drivers from the Gatos project. Gatos is really aimed at getting the
media addons (like the AIW stuff) to work, but it has a working driver
for the 3D bits. I think the last time I used this Potato was in
testing...
Hans
Reply to: