Preventing default route being wrongly attached
Hi all,
Q1 How do I reconfigure a Debian 3.x system 2.2.20-idepci so that the
default route is not tied to the sl0 / slip device.
eth0 is setup to be connected to a 3c509 ethernert card.
Why do I need to do this.
It appears that having sl0 atached to the default route before doing a
dial up which uses ppp cause ppp to login correctly, but then fail on
sending of packet data / ping data nothing is sent.
Do I need sl0 /slip support to be active if want to support dial too my
pc and dialout to a isp that supports ppp. If not how do I prevent slip
support from loading.
thanks
Robert Fernando
Reply to: