Re: ADAPTEC 2040U2W PROBLEM

[Paul Mackinney <paul@mackinney.net>]

nate muttered:
> <quote who="JM Vainio">
> > Hello!
> 
> > scsi bus is being reset for host 0 channel 0.
> > scsi host 0 channel 0 reset (pid17) timed out - trying harder
> > scsi bus is being reset for host 0 channel 0.
> > scsi host 0 abort (pid17) timed out - resetting
> > scsi bus is being reset for host 0 channel 0.
> > (scsi0:0:0:0) device reset, message buffer in use
> > Is anyone here familiar with this kind of issues?
> yep i had that occur on my 2 intel ISP2150 servers.
> the workaround is to tell the driver not to reset
> the card, its a kernel option you type when you
> boot the system at the boot: prompt. navigate through
> the help screens and it will be there, its something
> like
> 
> aic78xxx=no_reset
> 
If your card is like mine, there are some options you can configure at
boot by typing Ctrl-A, one of them has something to do with allowing 
resets.

HTH, Paul
-- 
Paul Mackinney       |   Who profited from Sept 11?
paul@mackinney.net   |   http://www.copvcia.com/