Re: 2.4.0-test11, PCMCIA ethernet card through yenta-socket
Pending further investigation, we now allege that Marvin Stodolsky wrote:
> My PCMCIA "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001"
> manfid: 0x0101, 0x5157
> function: 6 (network)
> PCI id: 0x10b7, 0x5157
> is working fine under 2.2.17 and under the 2.4.0-test11 with the "old
> way" PCMCIA support of compiling all the pcmcia modules,
> # lsmod
> Module Size Used by
> 3c575_cb 20064 2
> cb_enabler 2736 2 [3c575_cb]
> ds 6672 2 [cb_enabler]
> i82365 23232 2
> pcmcia_core 43392 0 [cb_enabler ds i82365]
>
> Thus far I've been unable to get eth0 functional with PCMCIA support
> specified "the new way" through the kernel .config file, after which
> support would presuably come from:
> 3c59x
> cb_enabler.o
> pcmcia_core.o
> yenta_socket.o
It doesn't work. The 3c575 chipset is different than the 3c59x
series. You might have luck with using the kernel-level support with
the 3x575_cb.o module from pcmcia-cs, but I wouldn't lay money on it.
Reply to: