XServer for ET4000/W32p hangs!!

[Mark Phillips <mark@maths.flinders.edu.au>]

Hi,

I have a friend who I am trying to help install debian 1.1.  He has an
ET4000/W32p graphics card.  I installed the appropriate server, went
through the xbase-configure program to create an XF86Config file, and
then ran "X -probeonly 2> out.txt" to try and get a clock line.  The
system just hung and I had to do a Ctr-Alt-Del to get out.

I couldn't work out what the problem was.  Any ideas?  I include the
out.txt file below.

Thanks,

Mark Phillips.  (mark@maths.flinders.edu.au)




XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6001)
Operating System: Linux
Configured drivers:
  ET4000W32: accelerated server for ET4000W32 graphics adaptors
(Patchlevel 0):
      et4000w32, et4000w32i, et4000w32p_rev_a, et4000w32i_rev_b,
      et4000w32i_rev_c, et4000w32p_rev_b, et4000w32p_rev_c,
      et4000w32p_rev_d
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/cua1, baudrate: 1200
(**) ET4000W32: Graphics device ID: "Hashem's Video Card"
 There are 11 lines left (71%). Press <space> for more, or 'i' to
return.
Message 4/476  From Hashem Najafi
  Page 2

(**) ET4000W32: Graphics device ID: "Hashem's Video Card"
(**) ET4000W32: Monitor ID: "Hashem's Monitor"
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 64.25 kHz.
Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 78.86 kHz.
Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 81.13 kHz.
Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not
exist.
         Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not
exist.
         Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) ET4000W32: ET4000: Initial hibit state: low