hffc escribió::
Hector, te cuento que entro como "linux singler" y segun encontre algunas cosas en Internet, la solucion a ese problema era regenerando las terminales con mknod -600 /dev/tty1 C 4 1 Hice lo mismo para las 8 primeras terminales y para la /dev/console, pero sigue sin arrancar. Lo grave para mi, es que por un simple cuelgue de la maquina, la misma quede casi fuera de servicio, casi seguro por un problema de falta de conocimiento de mi parte, por que me quedo con lo que siempre dicen : " Debian se instala una sola vez, no es como guindows", por eso la insistencia y tratar de repararlo. Gracias por la ayuda HectorEn un momento en el que hdparm había hecho estragos en el disco de mi servidor (en realidad los parámetros que yo le pase a hdparm), lo que hice fue: un disco de rescue y un disco de root, inicié con rescue root=/dev/fd0 y, con comandos limitados, pude solucionar el problema. Quizás debas agregar alguna herramienta más al disco root, eso depende de tu sistema. -- Héctor Andrés Rompato Carricart <hrompato@au-laplata.com.ar> Coordinador técnico COVIARES S.A. -- Autopista La Plata - Buenos Aires Gerencia de equipos y sistemas Av. España y Autopista, Quilmes (1878) Buenos Aires, Argentina -- To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Hay un script que se llama MAKEDEV, ¿probaste de usarlo?MAKEDEV(8) Linux Programmer's Manual MAKEDEV(8)
NAME MAKEDEV - create devices SYNOPSIS cd dev; ./MAKEDEV -V cd dev; ./MAKEDEV [ -n ] [ -v ] update cd dev; ./MAKEDEV [ -n ] [ -v ] [ -d ] device ... DESCRIPTIONMAKEDEV is a script that will create the devices in /dev used to interface with drivers in the kernel.
This man page is woefully out of date. A large number of devices are supported that are not documented
here.Note that programs giving the error ``ENOENT: No such file or directory'' normally means that the device file is missing, whereas ``ENODEV: No such device'' normally means the kernel does not have the driver
configured or loaded. OPTIONS -V Print out version (actually RCS version information) and exit.-n Do not actually update the devices, just print the actions that would be performed.
-d Delete the devices. The main use for this flag is by MAKEDEV itself.
-v Be verbose. Print out the actions as they are performed. This is the same output as produced by
-n. CUSTOMISATIONSince there is currently no standardisation in what names are used for system users and groups, it is possible that you may need to modify MAKEDEV to reflect your site's settings. Near the top of the file is a mapping from device type to user, group and permissions (e.g. all CD-ROM devices are set from the $cdrom variable). If you wish to change the defaults, this is the section to edit.
DEVICES General Optionsupdate This only works on kernels which have /proc/interrupts (introduced during 1.1.x). This file is scanned to see what devices are currently configured into the kernel, and this is compared with the previous settings stored in the file called DEVICES. Devices which are new since then or have a different major number are created, and those which are no longer configured are deleted.
genericCreate a generic subset of devices. This is the standard devices, plus floppy drives, various hard drives, pseudo-terminals, console devices, basic serial devices, busmice, and printer ports.
std Standard devices. These are: mem - acess to physical memory; kmem - access to kernel virtual memory; null - null device (infinite sink); port - access to I/O ports; zero - null byte source (infinite source); core - symlink to /proc/kcore (for kernel debugging); full - always returns ENOSPACE on write; ram - ramdisk; tty - to access the controlling tty of a process.
local This simply runs MAKEDEV.local. This is a script that can create any local devices.
Virtual Terminals consoleThis creates the devices associated with the console. This is the virtual terminals ttyx, where x can be from 0 though 63. The device tty0 is the currently active vt, and is also known as con sole. For each vt, there are two devices vcsx and vcsax, which are used to generate screen-dumps of the vt (the vcsx is just the text, and vcsax includes the attributes).
Con respecto a lo de instalar una sola vez, es muy cierto, todo problema tiene solución sin reinstalar (¿seré un fanático?)
-- Héctor Andrés Rompato Carricart <hrompato@au-laplata.com.ar> Coordinador técnico COVIARES S.A. -- Autopista La Plata - Buenos Aires Gerencia de equipos y sistemas Av. España y Autopista, Quilmes (1878) Buenos Aires, Argentina