Re: fglrx bei lenny
> Scheint so:
> http://www.x.org/wiki/radeonTV
>
> In deinem Fall musst du evtl. den Treiber patchen (Link zum Patch auf
> o.g. Seite). Hab das aber nie probiert.
Damit habe ich jetzt tv-out teilweise zum laufen gebracht...
mit
# xrandr --addmode S-video 800x600
# xrandr --output S-video --mode 800x600
# xrandr --output S-video --set tv_standard pal
sehe ich jetzt ein fahrbiges DESKTOP auf meinem Fehrnseher.
Das problem ist jetzt aber wenn ich ein film starte bleibt es im VLC
(und anderen Playern) einfach auf der Stelle swarz. Das habe ich schon
mal gesehen, weiss aber nicht mehr wie ich das gelöst habe.
Hier die ausgabe von
nu4@gnu42:~$ xrandr --verbose
Screen 0: minimum 320 x 200, current 800 x 600, maximum 1600 x 1200
VGA-0 connected 800x600+0+0 (0x6a) normal (normal left inverted right)
352mm x 264mm
Identifier: 0x5c
Timestamp: -983733552
Subpixel: no subpixels
Clones:
CRTC: 0
CRTCs: 0 1
EDID_DATA:
00ffffffffffff004e8e0c0039314e50
270b010368241b7eeb5e89a353469824
11484cffff803159455961598199a94f
e14001010101863d00c05100304040a0
130060081100001e000000fd0032a01e
601a000a202020202020000000fc0053
2f54203937502f3936500a20000000ff
00485645523931303637370a20200030
load_detection: 1 (0x00000001) range: (0,1)
.....
abgeschnitten
.....
CRTCs: 0 1
dvi_monitor_type: auto
scaler: off
tmds_pll: bios
load_detection: 0 (0x00000000) range: (0,1)
S-video connected 800x600+0+0 (0x6a) normal (normal left inverted
right) 0mm x 0mm
Identifier: 0x5e
Timestamp: -983733552
Subpixel: no subpixels
Clones:
CRTC: 1
CRTCs: 0 1
tv_standard: pal
tv_vertical_position: 0 (0x00000000) range: (-5,5)
tv_horizontal_position: 0 (0x00000000) range: (-5,5)
tv_horizontal_size: 0 (0x00000000) range: (-5,5)
load_detection: 1 (0x00000001) range: (0,1)
800x600 (0x7f) 38.2MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.4KHz
v: height 600 start 603 end 607 total 624 clock 59.9Hz
800x600 (0x6d) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x6a) 56.8MHz -HSync +VSync
h: width 800 start 848 end 928 total 1056 skew 0 clock 53.7KHz
v: height 600 start 603 end 607 total 633 clock 84.9Hz
Pal müsste doch richtig sein oder gibt es irgend ein pal-xy für Deuschland?
Darubehinaus bin ich mir nicht sicher ob der Beschleuniger von der
Grafikkarte aktive ist.
glxgears ruttelt sehr
und zeigt ca. 5000 Frames in 5 Sekunden
gnu42:~# cat /var/log/Xorg.0.log|grep glx
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
GLX Scheint geladen zu sein
glxinfo scheint ok zusein endet aber mit Speicherzugriffsfehler.
gnu4@gnu42:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting
LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 20060602 AGP 8x x86/MMX+/3DNow!+ TCL
OpenGL version string: 1.3 Mesa 7.0.3
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x26 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x27 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2e 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2f 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x31 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
Speicherzugriffsfehler
Hat jemand noch Ideen wie ich Video auf dem Fehrnsehr hinbekomme?
Vielen Dank
--
Lvad
Reply to: