résultat d'un smartctl -a
Bonjour la liste,
Quelqu'un pourrait m'aider à analyser la sortie d'un :
# smartctl -a /dev/hda
(fichier joint)
?
J'y entrave que dalle ...
Merci.
Jean Marc
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ATA III family
Device Model: ST320414A
Serial Number: 3EC08W8T
Firmware Version: 3.28
User Capacity: 20 020 396 032 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Aug 19 20:56:21 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 422) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000e 057 053 025 Old_age Always - 32473688
3 Spin_Up_Time 0x0002 076 070 000 Old_age Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 182
5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0
7 Seek_Error_Rate 0x000e 086 060 030 Old_age Always - 464098880
9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 24825
10 Spin_Retry_Count 0x0012 100 099 097 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2949
194 Temperature_Celsius 0x0022 034 048 000 Old_age Always - 34
195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age Always - 161356587
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 36496
200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 149 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 149 occurred at disk power-on lifetime: 22413 hours (933 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 da 0d f9 e1 Error: ICRC, ABRT at LBA = 0x01f90dda = 33099226
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 da 0d f9 e1 00 01:42:18.599 READ DMA
ca 00 08 ba 82 e5 e1 00 01:42:18.547 WRITE DMA
ca 00 08 61 bb b9 e1 00 01:42:18.547 WRITE DMA
ca 00 10 4a 84 41 e2 00 01:42:18.546 WRITE DMA
ca 00 08 3a 83 41 e2 00 01:42:18.546 WRITE DMA
Error 148 occurred at disk power-on lifetime: 22378 hours (932 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ba 24 d8 e1 Error: ICRC, ABRT at LBA = 0x01d824ba = 30942394
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ba 24 d8 e1 00 11:49:42.379 READ DMA
ca 00 08 22 82 41 e2 00 11:49:37.042 WRITE DMA
ca 00 08 32 82 35 e2 00 11:49:37.019 WRITE DMA
ca 00 08 62 84 2d e2 00 11:49:37.018 WRITE DMA
ca 00 08 1a 82 2d e2 00 11:49:37.003 WRITE DMA
Error 147 occurred at disk power-on lifetime: 22338 hours (930 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 58 85 49 e1 Error: ICRC, ABRT at LBA = 0x01498558 = 21595480
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 85 49 e1 00 14:17:36.767 READ DMA
ca 00 30 ca 53 d2 e1 00 14:17:36.745 WRITE DMA
ca 00 10 2a 5f 3f e2 00 14:17:36.718 WRITE DMA
c8 00 10 18 85 49 e1 00 14:17:36.714 READ DMA
ca 00 08 c2 53 d2 e1 00 14:17:36.695 WRITE DMA
Error 146 occurred at disk power-on lifetime: 22232 hours (926 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 0a 96 fa e1 Error: ICRC, ABRT at LBA = 0x01fa960a = 33199626
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 0a 96 fa e1 00 09:08:04.743 READ DMA
ca 00 58 b2 f6 d1 e1 00 09:08:04.710 WRITE DMA
c8 00 28 e2 95 fa e1 00 09:08:04.701 READ DMA
ca 00 08 7a 4a f5 e1 00 09:08:04.669 WRITE DMA
ca 00 08 82 ca ea e1 00 09:08:04.642 WRITE DMA
Error 145 occurred at disk power-on lifetime: 22228 hours (926 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 62 a6 07 e2 Error: ICRC, ABRT at LBA = 0x0207a662 = 34055778
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 62 a6 07 e2 00 04:32:01.691 READ DMA
ca 00 e8 3a 26 d2 e1 00 04:32:01.661 WRITE DMA
c8 00 08 0a 5c 07 e2 00 04:32:01.660 READ DMA
c8 00 08 fa 5b 07 e2 00 04:32:01.660 READ DMA
c8 00 20 b2 5b 07 e2 00 04:32:01.648 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 24825 -
Device does not support Selective Self Tests/Logging
Reply to: