Package: okular
Version: 4:4.14.2-2
Hello,
since we (at work) use an (older) version of okular as default pdf
viewer I use it a lot at home (this machine) as well.
Unfortunately, this printout issue makes it unsuitable for printing
out.
I experience for some time that files printed out with okular are
missing pices at the borders. I now tried to print out the official
German tax forms for 2014 and again, they are missing parts at the
edges.
Printing the *same* form with the *same* CUPS printer driver using
evince instead results in a complete page. Comparing the print outs,
the topmost visible part of the okular print out seems shifted up by
about 1 cm (though it is missing something at the top) and shifted left
by a few mm.
At the same time, the okular print out is expanded, i.e. on the right
hand side some parts are missing, the right most part visible is about
5 mm to the right compared to the evince print out. At the bottom
again some parts are missing, the bottom most part visible on the
okular print out is about 8 mm lower than on the evince print.
Please note that there is still paper left on all edges of the okular
printout, so it appears as if the printout was expanded and cropped
*before* handed out to the CUPS printing system.
Please tell me if/which additional information you need to track this
down. (And it would be great if it could be fixed possibly for Jessi
or a later point release).
Maybe there is a "test" page which contains clear marks (like many
printers have built in). I could try it both in okular and (as a
comparision) in evince.
I'm using the driver "FS-1020D" for the Kyocera printer of the same
name.
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages okular depends on:
ii kde-runtime 4:4.14.2-2
ii libc6 2.19-13
ii libfreetype6 2.5.2-2
ii libjpeg62-turbo 1:1.3.1-11
ii libkactivities6 4:4.13.3-1
ii libkdecore5 4:4.14.2-4
ii libkdeui5 4:4.14.2-4
ii libkexiv2-11 4:4.14.2-1
ii libkio5 4:4.14.2-4
ii libkparts4 4:4.14.2-4
ii libkprintutils4 4:4.14.2-4
ii libkpty4 4:4.14.2-4
ii libokularcore5 4:4.14.2-2
ii libphonon4 4:4.8.0-4
ii libpoppler-qt4-4 0.26.5-2
ii libqca2 2.0.3-6
ii libqimageblitz4 1:0.0.6-4
ii libqmobipocket1 4:4.14.2-1
ii libqt4-dbus 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libqt4-declarative 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libqt4-svg 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libqt4-xml 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libqtcore4 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libqtgui4 4:4.8.6+git64-g5dc8b2b+dfsg-2+b1
ii libsolid4 4:4.14.2-4
ii libspectre1 0.2.7-3
ii libstdc++6 4.9.1-19
ii phonon 4:4.8.0-4
ii zlib1g 1:1.2.8.dfsg-2+b1
okular recommends no packages.
Versions of packages okular suggests:
ii ghostscript 9.06~dfsg-1.1+b1
pn jovie <none>
pn okular-extra-backends <none>
pn poppler-data <none>
ii texlive-binaries 2014.20140926.35254-5
pn unrar <none>
-- no debconf information
--
Dr. Helge Kreutzmann debian@helgefjell.de
Dipl.-Phys. http://www.helgefjell.de/debian.php
64bit GNU powered gpg signed mail preferred
Help keep free software "libre": http://www.ffii.de/
Attachment:
signature.asc
Description: Digital signature