Re: SMC2835W with Ubuntu
> [4294991.502000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] ->
> GSI 11 (level, low) -> IRQ 11
> [4294991.503000] eth1: uploading firmware...
> [4294991.586000] eth1: firmware version: 1.0.4.3
> [4294991.586000] eth1: firmware upload complete
> [4294991.756000] eth1: resetting device...
> [4294991.756000] eth1: uploading firmware...
> [4294991.841000] eth1: firmware version: 1.0.4.3
> [4294991.841000] eth1: firmware upload complete
> [4294992.841000] eth1: no 'reset complete' IRQ seen - retrying
> [4294993.841000] eth1: no 'reset complete' IRQ seen - retrying
> [4294993.841000] eth1: interface reset failure
> [4294993.841000] prism54: Your card/socket may be faulty, or IRQ line
> too busy :(
try adding pci=noacpi to your kernel command line.
if you are using grub, edit /boot/grub/menu.lst at the line starting
with '# kopt='. run 'sudo update-grub' afterwards to propagate it to the
actual kernel parameters.
good luck,
--
Joris
Reply to: