I just went through my woody install on Inspiron 8200. On the initial installation, it gets its ip via dhcp. All good. I did an apt-get for the 2.4-18 kernel, recompiled it with some changes, restart and no more. On ifconfig I see lo and eth0, but I don’t get anything.
In /etc/interfaces I have auto eth0 commented out and eth0 set for dhcp.
If I manually try to assign the numbers it seems like it takes it. But when I add route gateway, I get that there is no such device.
Any suggestions?
I didn’t see netenv helping much, so I removed it from startup as well.
Thanks, Charles |