On Fri, 28 Mar 2003 00:18:49 -0000
"Richard Lewis" <richard.lewis@uea.ac.uk> wrote:
during the installation process was wrong - it seemed that about four
or five lines of text were missing from the bottom of the screen!
This meant that I couldn't see all the options properly and so
couldn't carry on with the installation.
That's 3.0r1 right?
It sounds like the installer is trying to use a VESA framebuffer mode
with more lines than your screen has available.
At the "boot:" prompt, try typing "vga=0x305" before you press <enter>.
If you're already typing something else, such as "bf24" to install a 2.4
kernel, just add "vga=0x305" to the end.
If that doesn't work, try "vga=0x303" or "vga=0x301".