Re: irda
In article <3BD2CC50.1040704@twmi.rr.com>
tallison1@twmi.rr.com writes:
>> Then does the following make any sense:
>> I used to configure this as a /dev/ttyS1 serial device
>> ttyS1 is associated with io 2f8.
>> nsc-... is associated with io 2e8
>> Windows/Bios show this as io 0x02f8, irq 3, dma 3
>>
>>
>> Can I just change the serial device?
If you want to use nsc-ircc, do the following command:
# setserial /dev/ttyS1 uart none port 0 irq 0
--
NOKUBI Takatsugu
E-mail: knok@daionet.gr.jp
knok@namazu.org / knok@debian.org
Reply to:
- Follow-Ups:
- Re: irda
- From: Tom Allison <tallison1@twmi.rr.com>
- References:
- Re: irda
- From: Tom Allison <tallison1@twmi.rr.com>