Re: Modem trouble
I had to define some special serial port options to get a Xircom cardbus
10/100 + modem card working. There is only one interrupt pin on pc
card/cardbus, so the different functions need to share the interrupt. If
you haven't already turned on share_irq, you may want to try it.
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_EXTENDED=y
# CONFIG_SERIAL_MANY_PORTS is not set
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_PRINTER_READBACK=y
CONFIG_MOUSE=y
On Mon, May 01, 2000 at 03:28:30AM -0700, Nick Willson wrote:
>
> Seeking help getting a modem to work in potato + some unstable. The modem is
> on a Linksys EtherFast 10/100 + 56K Modem PC Card, model no. PCMLM56.
>
> When the laptop was running Slink (installed from official CD set) the modem
> worked but the ethernet did not. Now the ethernet works but the modem does
> not. More details below, all help welcome.
>
> Nick
--
Lee Bradshaw lee@sectionIV.com (preferred)
Alantro Communications lee@alantro.com
Reply to: