[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#972418: linux-image-5.8.*: Can't login with Gdm under Wayland because keyboard doesn't work



Package: src:linux
Version: 5.8.10-1
Severity: normal
Tags: a11y

Dear Maintainer,
i can't login through GDM with any kernel of the 5.8 series as long as GDM is run under a Wayland session, beacause at login screen neither the keyboard nor the touchpad works. I can't even switch to a text console, the only thing i can do is reboot via sysrq (which works).
Searching in the internet i found many bugs about issues with 5.8 in an Asus laptop, which is my case, but all of them was talking about problems with the Asus Wmi driver, but it doesn't looks to be the same problem i expierienced.
Kernels until 5.7 works fine with the default configuration.
With 5.8, changing GDM configuration to make it use X instead of Wayland doeas the trick: keyboard and touchpad works so i'm able to login.

-- Package-specific info:
** Version:
Linux version 5.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-9) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.8.0-2-amd64 root=UUID=8dc4939a-c216-4951-ad52-14b1de3ae3d7 ro quiet

** Not tainted

** Kernel log:
[   14.310643] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.310644] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.310645] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.310645] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.310650] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.331342] mc: Linux media interface: v0.10
[   14.431217] videodev: Linux video capture interface: v2.00
[   14.526377] cryptd: max_cpu_qlen set to 1000
[   14.541893] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   14.550135] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   14.596297] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[   14.596462] ath: phy0: Set BT/WLAN RX diversity capability
[   14.603185] AVX2 version of gcm_enc/dec engaged.
[   14.603186] AES CTR mode by8 optimization enabled
[   14.603918] ath: phy0: Enable LNA combining
[   14.605048] ath: phy0: ASPM enabled: 0x42
[   14.605050] ath: EEPROM regdomain: 0x6c
[   14.605050] ath: EEPROM indicates we should expect a direct regpair map
[   14.605052] ath: Country alpha2 being used: 00
[   14.605053] ath: Regpair used: 0x6c
[   14.606120] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.606472] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffaa7a80b80000, irq=17
[   14.619543] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   14.742414] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a01)
[   14.745543] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[   14.745546] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[   14.745549] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[   14.745671] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
[   14.745801] usbcore: registered new interface driver uvcvideo
[   14.745802] USB Video Class driver (1.1.1)
[   14.749614] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   15.018435] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   15.019188] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   15.117982] Bluetooth: Core ver 2.22
[   15.118001] NET: Registered protocol family 31
[   15.118002] Bluetooth: HCI device and connection manager initialized
[   15.118005] Bluetooth: HCI socket layer initialized
[   15.118007] Bluetooth: L2CAP socket layer initialized
[   15.118009] Bluetooth: SCO socket layer initialized
[   15.307359] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.307365] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.307369] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.307372] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.307374] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.307378] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x1b
[   15.307382] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   15.530112] usbcore: registered new interface driver btusb
[   15.707050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   15.707240] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   15.707401] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   15.707566] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   15.707731] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   15.707917] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   15.713309] usb 1-8: firmware: direct-loading firmware ar3k/AthrBT_0x31010100.dfu
[   15.933417] usb 1-8: firmware: direct-loading firmware ar3k/ramps_0x31010100_40.dfu
[   15.938220] usb 1-8: USB disconnect, device number 4
[   15.938360] usbcore: registered new interface driver ath3k
[   16.246767] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[   18.747031] Adding 7812092k swap on /dev/sda6.  Priority:-2 extents:1 across:7812092k FS
[   19.083049] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   19.902717] audit: type=1400 audit(1603007779.932:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=526 comm="apparmor_parser"
[   19.959905] audit: type=1400 audit(1603007779.992:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=524 comm="apparmor_parser"
[   19.988604] audit: type=1400 audit(1603007780.020:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=527 comm="apparmor_parser"
[   20.005476] audit: type=1400 audit(1603007780.036:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=523 comm="apparmor_parser"
[   20.034054] audit: type=1400 audit(1603007780.064:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=534 comm="apparmor_parser"
[   20.034057] audit: type=1400 audit(1603007780.064:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=534 comm="apparmor_parser"
[   20.041672] audit: type=1400 audit(1603007780.072:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=532 comm="apparmor_parser"
[   20.041674] audit: type=1400 audit(1603007780.072:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=532 comm="apparmor_parser"
[   20.124713] audit: type=1400 audit(1603007780.160:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=531 comm="apparmor_parser"
[   20.196859] audit: type=1400 audit(1603007780.228:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=537 comm="apparmor_parser"
[   21.423734] usb 1-8: New USB device found, idVendor=04ca, idProduct=3018, bcdDevice= 0.02
[   21.423741] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   25.440891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.440896] Bluetooth: BNEP filters: protocol multicast
[   25.440908] Bluetooth: BNEP socket layer initialized
[   25.495907] NET: Registered protocol family 38
[   33.127309] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[   33.154853] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   33.283019] r8169 0000:02:00.0 enp2s0: Link is Down
[   47.225869] kauditd_printk_skb: 22 callbacks suppressed
[   47.225872] audit: type=1400 audit(1603007807.256:34): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=633 comm="cups-browsed" capability=23  capname="sys_nice"
[   56.201090] Bluetooth: RFCOMM TTY layer initialized
[   56.201104] Bluetooth: RFCOMM socket layer initialized
[   56.201128] Bluetooth: RFCOMM ver 1.11
[   73.299874] rfkill: input handler disabled
[   84.096073] wlp3s0: authenticate with e4:8f:34:40:1e:ac
[   84.112797] wlp3s0: send auth to e4:8f:34:40:1e:ac (try 1/3)
[   84.115208] wlp3s0: authenticated
[   84.118792] wlp3s0: associate with e4:8f:34:40:1e:ac (try 1/3)
[   84.122458] wlp3s0: RX AssocResp from e4:8f:34:40:1e:ac (capab=0x411 status=0 aid=3)
[   84.122555] wlp3s0: associated
[   84.122657] ath: EEPROM regdomain: 0x817c
[   84.122657] ath: EEPROM indicates we should expect a country code
[   84.122658] ath: doing EEPROM country->regdmn map search
[   84.122659] ath: country maps to regdmn code: 0x37
[   84.122659] ath: Country alpha2 being used: IT
[   84.122660] ath: Regpair used: 0x37
[   84.122660] ath: regdomain 0x817c dynamically updated by country element
[   84.210821] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   84.312727] rfkill: input handler enabled

** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: X556UAK
product_version: 1.0       
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0       
bios_vendor: American Megatrends Inc.
bios_version: X556UAK.314
board_vendor: ASUSTeK COMPUTER INC.
board_name: X556UAK
board_version: 1.0       

** Loaded modules:
ctr
ccm
rfcomm
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
cmac
algif_hash
algif_skcipher
af_alg
bnep
snd_soc_skl
x86_pkg_temp_thermal
snd_soc_hdac_hda
intel_powerclamp
snd_hda_ext_core
coretemp
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_soc_acpi_intel_match
kvm_intel
snd_hda_codec_hdmi
snd_soc_acpi
ath3k
btusb
snd_soc_core
kvm
btrtl
snd_hda_codec_realtek
irqbypass
snd_compress
snd_hda_codec_generic
btbcm
btintel
ledtrig_audio
bluetooth
snd_hda_intel
jitterentropy_rng
drbg
snd_intel_dspcfg
uvcvideo
snd_hda_codec
aes_generic
ghash_clmulni_intel
snd_hda_core
snd_hwdep
aesni_intel
ath9k
snd_pcm
crypto_simd
ath9k_common
cryptd
videobuf2_vmalloc
snd_timer
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
snd
ath9k_hw
glue_helper
mc
soundcore
rapl
ansi_cprng
intel_cstate
ath
joydev
mac80211
ecdh_generic
ecc
cfg80211
libaes
rtsx_usb_ms
libarc4
memstick
iTCO_wdt
intel_pmc_bxt
mei_me
mei
intel_uncore
iTCO_vendor_support
intel_xhci_usb_role_switch
roles
efi_pstore
efivars
intel_rapl_msr
watchdog
serio_raw
sg
asus_nb_wmi
pcspkr
asus_wmi
elan_i2c
sparse_keymap
tpm_crb
tpm_tis
tpm_tis_core
rfkill
tpm
rng_core
int3403_thermal
ac
acpi_pad
evdev
int3400_thermal
acpi_thermal_rel
processor_thermal_device
intel_rapl_common
int340x_thermal_zone
intel_soc_dts_iosf
asus_wireless
intel_pch_thermal
wmi_bmof
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
rtsx_usb_sdmmc
mmc_core
rtsx_usb
sd_mod
sr_mod
t10_pi
cdrom
crc_t10dif
crct10dif_generic
i915
xhci_pci
xhci_hcd
i2c_algo_bit
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ahci
libahci
drm_kms_helper
libata
r8169
realtek
cec
i2c_i801
i2c_smbus
libphy
scsi_mod
drm
intel_lpss_pci
intel_lpss
idma64
usbcore
i2c_hid
hid
usb_common
wmi
battery
video
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1043:1490]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	IOMMU group: 0
	Capabilities: <access denied>
	Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. HD Graphics 620 [1043:12fe]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 128
	IOMMU group: 1
	Region 0: Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1043:1490]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	IOMMU group: 2
	Region 0: Memory at ef220000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP USB 3.0 xHCI Controller [1043:201f]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 127
	IOMMU group: 3
	Region 0: Memory at ef210000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Thermal subsystem [1043:1490]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	IOMMU group: 3
	Region 0: Memory at ef238000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal

00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller [1043:1490]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	IOMMU group: 4
	Region 0: Memory at ef237000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller [1043:1490]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	IOMMU group: 4
	Region 0: Memory at ef236000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP CSME HECI [1043:1490]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 129
	IOMMU group: 5
	Region 0: Memory at ef235000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SATA Controller [AHCI mode] [1043:1490]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 125
	IOMMU group: 6
	Region 0: Memory at ef230000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at ef234000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at ef233000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 122
	IOMMU group: 7
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00002000-00002fff [size=4K]
	Memory behind bridge: a0000000-a01fffff [size=2M]
	Prefetchable memory behind bridge: 00000000a0200000-00000000a03fffff [size=2M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	IOMMU group: 8
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff [size=4K]
	Memory behind bridge: ef100000-ef1fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 124
	IOMMU group: 9
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: ef000000-ef0fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d58] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP LPC Controller [1043:1490]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	IOMMU group: 10

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PMC [1043:1490]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 10
	Region 0: Memory at ef22c000 (32-bit, non-prefetchable) [disabled] [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP HD Audio [1043:11c0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 130
	IOMMU group: 10
	Region 0: Memory at ef228000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at ef200000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
	Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SMBus [1043:1490]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	IOMMU group: 10
	Region 0: Memory at ef232000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
	Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	IOMMU group: 11
	Region 0: I/O ports at e000 [size=256]
	Region 2: Memory at ef104000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at ef100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

03:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)
	Subsystem: Lite-On Communications Inc QCA9565 / AR9565 Wireless Network Adapter [11ad:1823]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	IOMMU group: 12
	Region 0: Memory at ef000000 (64-bit, non-prefetchable) [size=512K]
	Expansion ROM at ef080000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 04ca:3018 Lite-On Technology Corp. 
Bus 001 Device 003: ID 13d3:5a01 IMC Networks USB2.0 VGA UVC WebCam
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.8.0-2-amd64 (SMP w/4 CPU threads)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=it:en
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.8.0-2-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.139
ii  kmod                                    27+20200310-2
ii  linux-base                              4.6

Versions of packages linux-image-5.8.0-2-amd64 recommends:
ii  apparmor             2.13.4-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.8.0-2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.04-8
ic  grub-pc                 2.02~beta3-5
pn  linux-doc-5.8           <none>

Versions of packages linux-image-5.8.0-2-amd64 is related to:
ii  firmware-amd-graphics     20200918-1
ii  firmware-atheros          20200918-1
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20200918-1
ii  firmware-misc-nonfree     20200918-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20200918-1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: