Your message dated Fri, 10 Aug 2018 22:20:12 +0100 with message-id <af339cdc41394d2ace3761c3991a135b187e85fb.camel@decadent.org.uk> and subject line Re: Bug#905713: linux-image-4.17.0-1-amd64: Aplweis kernel not rule has caused the Debian Bug report #905713, regarding linux-image-4.17.0-1-amd64: Aplweis kernel not rule to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 905713: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=905713 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.17.0-1-amd64: Aplweis kernel not rule
- From: "v1570r@yahoo.es" <v1570r@yahoo.es>
- Date: Wed, 08 Aug 2018 14:34:59 +0200
- Message-id: <[🔎] 153373169942.2545.2492118466718302465.reportbug@enuno>
Package: src:linux Version: 4.17.8-1 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 4.17.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-26)) #1 SMP Debian 4.17.8-1 (2018-07-20) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-1-amd64 root=UUID=c1bd0c78-33a3-4992-b5da-3d3ad7d0a2c3 ro quiet ** Tainted: C (1024) * Module from drivers/staging has been loaded. ** Kernel log: [ 8.179816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.210631] Adding 584700k swap on /dev/mmcblk1p3. Priority:-2 extents:1 across:584700k SSFS [ 8.242430] sda: sda1 [ 8.245613] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.255610] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.277507] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 8.991432] lp: driver loaded but no devices found [ 9.010500] ppdev: user-space parallel port driver [ 9.712121] audit: type=1400 audit(1533730953.443:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1237 comm="apparmor_parser" [ 9.712129] audit: type=1400 audit(1533730953.443:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1234 comm="apparmor_parser" [ 9.716359] audit: type=1400 audit(1533730953.447:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1236 comm="apparmor_parser" [ 9.721670] audit: type=1400 audit(1533730953.455:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1245 comm="apparmor_parser" [ 9.721921] audit: type=1400 audit(1533730953.455:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1235 comm="apparmor_parser" [ 9.721927] audit: type=1400 audit(1533730953.455:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1235 comm="apparmor_parser" [ 9.721930] audit: type=1400 audit(1533730953.455:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1235 comm="apparmor_parser" [ 9.724120] audit: type=1400 audit(1533730953.459:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1243 comm="apparmor_parser" [ 9.724126] audit: type=1400 audit(1533730953.459:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1243 comm="apparmor_parser" [ 9.724128] audit: type=1400 audit(1533730953.459:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1243 comm="apparmor_parser" [ 11.125442] elogind[1776]: New seat seat0. [ 11.168583] elogind[1776]: Watching system buttons on /dev/input/event9 (ITE Tech. Inc. ITE Device(8595)) [ 11.212377] elogind[1776]: Watching system buttons on /dev/input/event6 (gpio-keys) [ 11.306880] Bluetooth: Core ver 2.22 [ 11.306913] NET: Registered protocol family 31 [ 11.306915] Bluetooth: HCI device and connection manager initialized [ 11.306923] Bluetooth: HCI socket layer initialized [ 11.306927] Bluetooth: L2CAP socket layer initialized [ 11.306943] Bluetooth: SCO socket layer initialized [ 11.345931] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.345935] Bluetooth: BNEP filters: protocol multicast [ 11.345943] Bluetooth: BNEP socket layer initialized [ 11.379072] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.382716] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 11.382772] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 11.382893] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 11.382898] Request firmware failed with error 0xfffffffe [ 11.462082] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 11.462120] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 11.462129] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 11.462133] Request firmware failed with error 0xfffffffe [ 11.463819] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 11.463850] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 11.463859] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 11.463863] Request firmware failed with error 0xfffffffe [ 22.025815] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 22.025845] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 22.025853] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 22.025857] Request firmware failed with error 0xfffffffe [ 22.027397] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 22.027420] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 22.027428] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 22.027431] Request firmware failed with error 0xfffffffe [ 32.014869] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 32.014903] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 32.014913] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 32.014917] Request firmware failed with error 0xfffffffe [ 32.016667] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 32.016694] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 32.016702] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 32.016706] Request firmware failed with error 0xfffffffe [ 42.020985] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 42.021031] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 42.021045] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 42.021052] Request firmware failed with error 0xfffffffe [ 42.022982] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 42.023015] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 42.023025] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 42.023029] Request firmware failed with error 0xfffffffe [ 45.555160] random: crng init done [ 45.555445] random: 3 urandom warning(s) missed due to ratelimiting [ 52.011766] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 52.011800] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 52.011809] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 52.011814] Request firmware failed with error 0xfffffffe [ 52.013627] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 52.013655] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 52.013664] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 52.013668] Request firmware failed with error 0xfffffffe [ 62.023873] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 62.023903] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 62.023912] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 62.023915] Request firmware failed with error 0xfffffffe [ 62.025480] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin [ 62.025505] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) [ 62.025513] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 [ 62.025517] Request firmware failed with error 0xfffffffe [ 70.754129] do_trap: 2 callbacks suppressed [ 70.754133] traps: upowerd[2130] trap int3 ip:7efe31d4dc41 sp:7ffde4dfc300 error:0 in libglib-2.0.so.0.5600.1[7efe31cfc000+113000] [ 95.441647] elogind[1776]: New session 1 of user senarnau. [ 158.755353] elogind[1776]: New session 2 of user senarnau. [ 192.559299] usb 1-1.1: USB disconnect, device number 5 [ 192.784689] usb 1-1.1: new high-speed USB device number 6 using xhci_hcd [ 192.886326] usb 1-1.1: New USB device found, idVendor=05c6, idProduct=f00e, bcdDevice= 3.18 [ 192.886342] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 192.886352] usb 1-1.1: Product: Aquaris U [ 192.886361] usb 1-1.1: Manufacturer: bq [ 192.886369] usb 1-1.1: SerialNumber: UP000294 [ 192.946416] usbcore: registered new interface driver cdc_ether [ 192.950818] rndis_host 1-1.1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.1, RNDIS device, 92:f2:aa:7c:3c:90 [ 192.950890] usbcore: registered new interface driver rndis_host [ 192.965159] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready ** Model information sys_vendor: Acer product_name: Aspire SW5-012 product_version: V1.05 chassis_vendor: Acer chassis_version: Chassis Version bios_vendor: INSYDE Corp. bios_version: V1.05 board_vendor: Acer board_name: Fendi2 board_version: V1.05 ** Loaded modules: rndis_host cdc_ether usbnet mii bnep bluetooth jitterentropy_rng drbg ansi_cprng ecdh_generic cpufreq_userspace cpufreq_powersave cpufreq_conservative nls_ascii nls_cp437 vfat fat rtl8723be btcoexist rtl8723_common rtl_pci rtlwifi mac80211 parport_pc ppdev lp parport sg sd_mod uas usb_storage scsi_mod usbhid snd_hdmi_lpe_audio snd_soc_sst_bytcr_rt5640 intel_rapl intel_soc_dts_thermal intel_powerclamp coretemp gpio_keys evdev joydev kvm_intel wmi_bmof acer_wmi kvm sparse_keymap irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel efi_pstore intel_cstate r8723bs(C) ak8975 efivars pcspkr snd_soc_rt5670 snd_soc_rt5645 snd_intel_sst_acpi snd_intel_sst_core cfg80211 snd_soc_sst_atom_hifi2_platform snd_soc_rt5640 snd_soc_acpi tpm_crb snd_soc_acpi_intel_match snd_soc_rl6231 rfkill i915 iTCO_wdt hid_multitouch iTCO_vendor_support tpm_tis tpm_tis_core inv_mpu6050_i2c button tpm inv_mpu6050 drm_kms_helper snd_soc_core dw_dmac industrialio_triggered_buffer rng_core kfifo_buf dw_dmac_core soc_button_array snd_compress int3406_thermal processor_thermal_device dptf_power industrialio int3400_thermal video int3403_thermal i2c_mux acpi_thermal_rel intel_soc_dts_iosf int340x_thermal_zone snd_pcm drm snd_timer acpi_pad intel_int0002_vgpio ac snd i2c_algo_bit soundcore wmi battery ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb hid_generic crc32c_intel mmc_block aesni_intel aes_x86_64 crypto_simd cryptd glue_helper xhci_pci xhci_hcd usbcore lpc_ich usb_common thermal i2c_hid hid sdhci_acpi sdhci mmc_core ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6c:71:d9:f8:1f:0b brd ff:ff:ff:ff:ff:ff 3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether 92:f2:aa:7c:3c:90 brd ff:ff:ff:ff:ff:ff inet 192.168.42.135/24 brd 192.168.42.255 scope global dynamic noprefixroute usb0 valid_lft 3177sec preferred_lft 3177sec inet6 fe80::ec5a:747b:5001:e0e9/64 scope link noprefixroute valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 9215 64 0 0 0 0 0 0 9215 64 0 0 0 0 0 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 usb0: 7489 30 0 0 0 0 0 0 11083 63 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 39 total packets received 3 with invalid addresses 0 forwarded 0 incoming packets discarded 36 incoming packets delivered 38 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 7 active connection openings 2 passive connection openings 4 failed connection attempts 0 connection resets received 0 connections established 71 segments received 71 segments sent out 0 segments retransmitted 0 bad segments received 6 resets sent Udp: 21 packets received 0 packets to unknown port received 0 packet receive errors 21 packets sent 0 receive buffer errors 0 send buffer errors UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 3 delayed acks sent 23 packet headers predicted 19 acknowledgments not containing data payload received 7 predicted acknowledgments 1 connections reset due to unexpected data TCPRcvCoalesce: 5 TCPOrigDataSent: 31 IpExt: InMcastPkts: 15 OutMcastPkts: 17 InOctets: 9054 OutOctets: 3904 InMcastOctets: 2019 OutMcastOctets: 2099 InNoECTPkts: 39 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0f) Subsystem: Acer Incorporated [ALI] Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [1025:0928] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0f) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Atom Processor Z36xxx/Z37xxx Series Graphics & Display [1025:0928] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 37 Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 4: I/O ports at 1000 [size=8] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [8086:0f35] (rev 0f) (prog-if 30 [XHCI]) Subsystem: Acer Incorporated [ALI] Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [1025:0928] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 34 Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0f) Subsystem: Acer Incorporated [ALI] Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [1025:0928] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: Memory at 90700000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at 90600000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0f) Subsystem: Acer Incorporated [ALI] Atom Processor Z36xxx/Z37xxx Series Power Control Unit [1025:0928] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 06cb:2968 Synaptics, Inc. Bus 001 Device 003: ID 05e3:0735 Genesys Logic, Inc. Bus 001 Device 006: ID 05c6:f00e Qualcomm, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Distributor ID: Devuan Description: Devuan GNU/Linux testing/unstable Release: testing/unstable Codename: n/a Architecture: x86_64 Kernel: Linux 4.17.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8), LANGUAGE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) LSM: AppArmor: enabled Versions of packages linux-image-4.17.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.17.0-1-amd64 recommends: ii apparmor 2.13-8 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.17.0-1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi-amd64 | extlinux <none> pn linux-doc-4.17 <none> Versions of packages linux-image-4.17.0-1-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 905713-done@bugs.debian.org
- Subject: Re: Bug#905713: linux-image-4.17.0-1-amd64: Aplweis kernel not rule
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Fri, 10 Aug 2018 22:20:12 +0100
- Message-id: <af339cdc41394d2ace3761c3991a135b187e85fb.camel@decadent.org.uk>
- In-reply-to: <[🔎] 153373169942.2545.2492118466718302465.reportbug@enuno>
- References: <[🔎] 153373169942.2545.2492118466718302465.reportbug@enuno>
I can't see a bug description here, but if the problem is: On Wed, 2018-08-08 at 14:34 +0200, v1570r@yahoo.es wrote: [...] > [ 11.382716] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin > [ 11.382772] rtl8723bs mmc0:0001:1: firmware: failed to load rtlwifi/rtl8723bs_nic.bin (-2) > [ 11.382893] rtl8723bs mmc0:0001:1: Direct firmware load for rtlwifi/rtl8723bs_nic.bin failed with error -2 > [ 11.382898] Request firmware failed with error 0xfffffffe [...] then you will need to install the firmware-realtek package from the non-free section of the Debian archive. See <https://wiki.debian.org/Firmware> for more information. Ben. -- Ben Hutchings Time is nature's way of making sure that everything doesn't happen at once.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---