[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#876774: linux-image-4.9.0-3-armmp: please enable missing configuration options for dove cubox



Package: src:linux
Version: 4.9.30-2+deb9u5
Severity: wishlist
Tags: patch

Dear Maintainer,

Please enable the required config options for supporting the SolidRun CuBox (Dove).
This machine is extremely well supported in Mainline and it would be great if it could become a first-class citizen of Debian.

Note that not only the 4.9.0-armmp is affected, but also any later kernel package at this point.
I'd be happy to test any version after enabling the missing options!
But getting it into stretch would be supreme.

I have collected these missing options:
CONFIG_MACH_DOVE=y
CONFIG_CACHE_TAUROS2=y
CONFIG_CPU_PJ4=y
CONFIG_DOVE_CLK=y
CONFIG_DOVE_THERMAL=n
CONFIG_MMC_SDHCI_DOVE=n
CONFIG_ORION_IRQCHIP=y
CONFIG_ORION_TIMER=y
CONFIG_PHY_MVEBU_SATA=y
CONFIG_PINCTRL_DOVE=y

CONFIG_COMMON_CLK_SI5351=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_MMC_SDHCI_DOVE=m
CONFIG_MV643XX_ETH=m
CONFIG_PHY_MVEBU_SATA=m
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_DOVE_THERMAL=m

# This one is not needed, it is present on the SoC, but not exposed by the Cubox
CONFIG_DRM_ARMADA=m

I have built mainline 4.9.45 from the armmp .config, and above options to verify that it actually does work!

Yours sincerely
Josua Mayer


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
Hardware	: Marvell Dove
Revision	: 0000
Device Tree model: SolidRun CuBox

** PCI devices:

** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 9.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armhf (armv7l)

Kernel: Linux 4.9.45-dove-cubox (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-3-armmp depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-3-armmp recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-3-armmp suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-3-armmp is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: