Bug#841007: linux-image-4.8.0-rc8-amd64-unsigned: Shutdown when pressing any key on Asus E200 HA
Package: src:linux
Version: 4.8~rc8-1~exp1
Severity: important
Dear Maintainer,
* What led up to the situation?
Using a very recent Debian kernel 4.7 or 4.8. The vanilla 4.7.0 from
kernel.org works. I simply boot the laptop. When the X11 is up and
ready to input the user name, if I press any key it will shutdown. I
found no message in /var/log/kernel.log that explains the problem.
* What exactly did you do (or not do) that was effective (or
ineffective)?
For reporting this bug I am connecting by SSH to the laptop over a
USB/Ethernet adaptor.
What measures can I do to gather more debugging information?
Kind regards
Jose M Calhariz
-- Package-specific info:
** Version:
Linux version 4.8.0-rc8-amd64 (debian-kernel@lists.debian.org) (gcc
version 5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.8~rc8-1~exp1
(2016-09-26)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-rc8-amd64
root=UUID=577ff77a-2aa2-4c43-9c83-91e107b674c2 ro printk.time=n
initcall_debug no_console_suspend
** Tainted: E (8192)
* Unsigned module has been loaded.
** Kernel log:
[ 6.100201] initcall init_fat_fs+0x0/0xfd0 [fat] returned 0 after
46151 usecs
[ 6.100962] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000
[ghash_clmulni_intel] returned 0 after 17143 usecs
[ 6.102575] calling init_vfat_fs+0x0/0x1000 [vfat] @ 303
[ 6.102588] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after
5 usecs
[ 6.104151] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul]
@ 257
[ 6.107983] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul]
returned 0 after 3726 usecs
[ 6.111215] calling crct10dif_intel_mod_init+0x0/0x1000
[crct10dif_pclmul] @ 267
[ 6.124523] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 316
[ 6.124531] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0
after 0 usecs
[ 6.135566] initcall crct10dif_intel_mod_init+0x0/0x1000
[crct10dif_pclmul] returned 0 after 23765 usecs
[ 6.137107] calling evdev_init+0x0/0x1000 [evdev] @ 261
[ 6.139222] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after
2050 usecs
[ 6.143220] calling init_nls_ascii+0x0/0x1000 [nls_ascii] @ 320
[ 6.143228] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0
after 0 usecs
[ 6.171881] calling vmx_init+0x0/0x435 [kvm_intel] @ 266
[ 6.179360] calling asus_wmi_init+0x0/0x1000 [asus_wmi] @ 260
[ 6.179367] asus_wmi: ASUS WMI generic driver loaded
[ 6.179386] initcall asus_wmi_init+0x0/0x1000 [asus_wmi] returned 0
after 16 usecs
[ 6.181794] calling asus_nb_wmi_init+0x0/0x1000 [asus_nb_wmi] @ 260
[ 6.182142] asus_wmi: Initialization: 0x1
[ 6.182258] asus_wmi: BIOS WMI version: 7.9
[ 6.182352] asus_wmi: SFUN value: 0x37
[ 6.185752] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input8
[ 6.201743] asus_wmi: Number of fans: 1
[ 6.208232] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/pre-cal-pci-0000:01:00.0.bin (-2)
[ 6.208254] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 6.208297] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/cal-pci-0000:01:00.0.bin (-2)
[ 6.208311] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 6.211045] initcall asus_nb_wmi_init+0x0/0x1000 [asus_nb_wmi]
returned 0 after 28549 usecs
[ 6.220335] ath10k_pci 0000:01:00.0: firmware: direct-loading
firmware ath10k/QCA9377/hw1.0/firmware-5.bin
[ 6.220374] ath10k_pci 0000:01:00.0: qca9377 hw1.0 target 0x05020000
chip_id 0x003820ff sub 1a3b:2b31
[ 6.220388] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0
tracing 0 dfs 0 testmode 0
[ 6.221359] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.1.0-00267-1
api 5 features ignore-otp crc32 79cea2c7
[ 6.223919] calling iTCO_vendor_init_module+0x0/0x1000
[iTCO_vendor_support] @ 271
[ 6.223923] iTCO_vendor_support: vendor-support=0
[ 6.223940] initcall iTCO_vendor_init_module+0x0/0x1000
[iTCO_vendor_support] returned 0 after 12 usecs
[ 6.225084] calling iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 271
[ 6.225086] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.225220] iTCO_wdt: Found a Braswell SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 6.225553] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.225610] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt]
returned 0 after 504 usecs
[ 6.251830] initcall vmx_init+0x0/0x435 [kvm_intel] returned 0 after
78051 usecs
[ 6.254285] calling coretemp_init+0x0/0x1000 [coretemp] @ 257
[ 6.254616] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0
after 314 usecs
[ 6.256501] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 267
[ 6.256619] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp]
returned 0 after 105 usecs
[ 6.257469] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 257
[ 6.257479] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq]
returned -17 after 1 usecs
[ 6.259548] calling rapl_init+0x0/0x1000 [intel_rapl] @ 259
[ 6.259558] intel_rapl: Found RAPL domain package
[ 6.259582] intel_rapl: Found RAPL domain core
[ 6.259879] initcall rapl_init+0x0/0x1000 [intel_rapl] returned 0
after 312 usecs
[ 6.295672] fbcon: inteldrmfb (fb0) is primary device
[ 6.300073] ath10k_pci 0000:01:00.0: firmware: direct-loading
firmware ath10k/QCA9377/hw1.0/board-2.bin
[ 6.300776] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A
crc32 93da0176
[ 6.391204] input: Elan Touchpad as
/devices/pci0000:00/808622C1:02/i2c-2/i2c-ELAN0100:00/input/input9
[ 6.394814] calling joydev_init+0x0/0x1000 [joydev] @ 262
[ 6.394827] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after
7 usecs
[ 6.587324] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2,
ASIX AX88772 USB 2.0 Ethernet, 00:19:fd:4c:b5:96
[ 6.587512] usbcore: registered new interface driver asix
[ 6.587545] initcall asix_driver_init+0x0/0x1000 [asix] returned 0
after 801370 usecs
[ 6.625465] asix 1-2:1.0 enx0019fd4cb596: renamed from eth0
[ 7.688559] Console: switching to colour frame buffer device 170x48
[ 7.725686] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.993928] calling bnep_init+0x0/0x96 [bnep] @ 426
[ 7.993933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.996588] Bluetooth: BNEP filters: protocol multicast
[ 7.999172] Bluetooth: BNEP socket layer initialized
[ 8.001699] initcall bnep_init+0x0/0x96 [bnep] returned 0 after 7580
usecs
[ 8.100249] ath10k_pci 0000:01:00.0: htt-ver 3.1 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ 8.108297] ath: EEPROM regdomain: 0x6a
[ 8.108303] ath: EEPROM indicates we should expect a direct regpair map
[ 8.108315] ath: Country alpha2 being used: 00
[ 8.108318] ath: Regpair used: 0x6a
[ 8.112657] calling arc4_init+0x0/0x1000 [arc4] @ 435
[ 8.113771] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after
1068 usecs
[ 8.123532] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[ 8.319127] calling cpufreq_gov_powersave_init+0x0/0x1000
[cpufreq_powersave] @ 500
[ 8.319137] initcall cpufreq_gov_powersave_init+0x0/0x1000
[cpufreq_powersave] returned 0 after 1 usecs
[ 8.332280] calling cpufreq_gov_userspace_init+0x0/0x1000
[cpufreq_userspace] @ 509
[ 8.332288] initcall cpufreq_gov_userspace_init+0x0/0x1000
[cpufreq_userspace] returned 0 after 1 usecs
[ 8.340921] calling cpufreq_gov_dbs_init+0x0/0x1000
[cpufreq_conservative] @ 513
[ 8.340929] initcall cpufreq_gov_dbs_init+0x0/0x1000
[cpufreq_conservative] returned 0 after 1 usecs
[ 8.424066] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 548
[ 8.424076] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq]
returned -17 after 1 usecs
[ 8.694903] IPv6: ADDRCONF(NETDEV_UP): enx0019fd4cb596: link is not ready
[ 8.698630] asix 1-2:1.0 enx0019fd4cb596: link up, 100Mbps,
full-duplex, lpa 0xCDE1
[ 8.714378] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 8.876352] asix 1-2:1.0 enx0019fd4cb596: link up, 100Mbps,
full-duplex, lpa 0xCDE1
[ 10.680382] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 12.644959] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 12.817619] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 13.536967] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 13.541130] systemd[1]: apt-daily.timer: Adding 7h 46.493812s random
time.
[ 14.214763] systemd[1]: apt-daily.timer: Adding 3h 18min 11.528443s
random time.
[ 51.115424] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 51.527487] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 51.730588] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 273.021630] random: crng init done
[ 336.038520] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: E200HA
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: E200HA.210
board_vendor: ASUSTeK COMPUTER INC.
board_name: E200HA
board_version: 1.0
** Loaded modules:
cpufreq_conservative(E)
cpufreq_userspace(E)
cpufreq_powersave(E)
arc4(E)
bnep(E)
joydev(E)
intel_rapl(E)
intel_powerclamp(E)
coretemp(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
asus_nb_wmi(E)
asus_wmi(E)
sparse_keymap(E)
kvm_intel(E)
kvm(E)
nls_ascii(E)
irqbypass(E)
evdev(E)
nls_cp437(E)
crct10dif_pclmul(E)
crc32_pclmul(E)
vfat(E)
efi_pstore(E)
ghash_clmulni_intel(E)
efivars(E)
pcspkr(E)
elan_i2c(E)
fat(E)
battery(E)
ath10k_pci(E)
ath10k_core(E)
ath(E)
mac80211(E)
cfg80211(E)
btusb(E)
btrtl(E)
btbcm(E)
btintel(E)
uvcvideo(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
bluetooth(E)
videobuf2_v4l2(E)
videobuf2_core(E)
rfkill(E)
asix(E)
videodev(E)
usbnet(E)
libphy(E)
media(E)
mii(E)
i915(E)
drm_kms_helper(E)
drm(E)
lpc_ich(E)
mfd_core(E)
i2c_algo_bit(E)
processor_thermal_device(E)
shpchp(E)
intel_soc_dts_iosf(E)
wmi(E)
snd_intel_sst_acpi(E)
snd_intel_sst_core(E)
snd_soc_sst_mfld_platform(E)
snd_soc_sst_match(E)
snd_soc_core(E)
snd_compress(E)
snd_pcm(E)
snd_timer(E)
video(E)
dw_dmac(E)
snd(E)
dw_dmac_core(E)
i2c_designware_platform(E)
soundcore(E)
i2c_designware_core(E)
tpm_crb(E)
soc_button_array(E)
int3403_thermal(E)
int340x_thermal_zone(E)
int3400_thermal(E)
ac(E)
acpi_thermal_rel(E)
button(E)
acpi_pad(E)
asus_wireless(E)
tpm_tis(E)
tpm_tis_core(E)
tpm(E)
efivarfs(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
crc16(E)
jbd2(E)
crc32c_generic(E)
fscrypto(E)
ecb(E)
mbcache(E)
mmc_block(E)
crc32c_intel(E)
aesni_intel(E)
aes_x86_64(E)
glue_helper(E)
lrw(E)
gf128mul(E)
ablk_helper(E)
xhci_pci(E)
xhci_hcd(E)
cryptd(E)
usbcore(E)
usb_common(E)
thermal(E)
i2c_hid(E)
sdhci_acpi(E)
hid(E)
sdhci(E)
fjes(E)
mmc_core(E)
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enx0019fd4cb596: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP group default qlen 1000
link/ether 00:19:fd:4c:b5:96 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic
enx0019fd4cb596
valid_lft 85988sec preferred_lft 85988sec
inet6 fe80::1176:177d:93ff:5120/64 scope link
valid_lft forever preferred_lft forever
3: wlp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state
DOWN group default qlen 1000
link/ether a2:1e:c4:ae:5a:d6 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
enx0019fd4cb596: 444295 1387 0 0 0 0 0
0 400830 1339 0 0 0 0 0 0
wlp1s0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
lo: 42002 274 0 0 0 0 0 0
42002 274 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
1495 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
1494 incoming packets delivered
1465 requests sent out
40 outgoing packets dropped
Icmp:
100 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 80
echo requests: 20
100 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 80
echo replies: 20
IcmpMsg:
InType3: 80
InType8: 20
OutType0: 20
OutType3: 80
Tcp:
8 active connections openings
2 passive connection openings
1 failed connection attempts
0 connection resets received
3 connections established
1371 segments received
1341 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
49 packets received
80 packets to unknown port received.
0 packet receive errors
130 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 2
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
3 TCP sockets finished time wait in fast timer
15 delayed acks sent
391 packet headers predicted
107 acknowledgments not containing data payload received
805 predicted acknowledgments
TCPRcvCoalesce: 205
TCPAutoCorking: 14
TCPOrigDataSent: 1141
IpExt:
InMcastPkts: 18
OutMcastPkts: 20
InBcastPkts: 2
InOctets: 456013
OutOctets: 387066
InMcastOctets: 1938
OutMcastOctets: 2034
InBcastOctets: 483
InNoECTPkts: 1495
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register
[8086:2280] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI
Configuration Registers [8086:22b0] (rev 22) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 313
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0200c Data: 4124
Capabilities: [b0] Vendor Specific Information: Len=07 <?>
Kernel driver in use: i915
Kernel modules: i915
00:0b.0 Signal processing controller [1180]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power
Management Controller [8086:22dc] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Power Management Controller [1043:10b0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 311
Region 0: Memory at 91639000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41d3
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5]
(rev 22) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 310
Region 0: Memory at 91600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0c00c Data: 41b3
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted
Execution Engine [8086:2298] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 91500000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 91400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port [8086:22c8] (rev
22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 309
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: 91200000-913fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF
Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR+,
OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4193
Capabilities: [90] Subsystem: ASUSTeK Computer Inc.
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express
Port [1043:10b0]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v0] #00
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=10us
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCU [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac
Wireless Network Adapter [168c:0042] (rev 30)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
[1a3b:2b31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 312
Region 0: Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
Address: fee0800c Data: 41e3
Masking: 000000fe Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+,
OBFF Via message
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR+,
OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [148 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [168 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178 v1] Latency Tolerance Reporting
Max snoop latency: 15360ns
Max no snoop latency: 15360ns
Capabilities: [180 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
L1_PM_Substates+
PortCommonModeRestoreTime=50us PortTPowerOnTime=10us
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:3496 IMC Networks
Bus 001 Device 003: ID 0b95:7720 ASIX Electronics Corp. AX88772
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.8.0-rc8-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to
en_GB.UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-rc8-amd64-unsigned depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.5
Versions of packages linux-image-4.8.0-rc8-amd64-unsigned recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.8.0-rc8-amd64-unsigned suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta2-36
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-rc8-amd64-unsigned is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20160824-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: