Package: src:linux
Version: 3.11.6-1
Severity: normal
Tags: upstream
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
The nouveau driver fails on this hardware. A talk in #nouveau on
Freenode turned up that the failure is related to the EVO engine
responsible for modesetting. Here are the relevant parts of that chat,
more explanations follow below:
08:02 < imirkin> nouveau E[ PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x000d5080
08:02 < Natureshadow> that means?
08:02 < imirkin> that's a bit unfortunate
08:02 < imirkin> dunno, gimme a min
08:02 < Natureshadow> sorry, I am not a kernel hacker ;) ...
08:03 < imirkin> oh, that's the EVO flush
08:03 < imirkin> and the d5080 is probably the fifo position or something
08:03 < imirkin> uhm, silly question... do you have any indication that this hardware actually works?
08:05 < imirkin> (e.g. on windows, or using the nvidia blob or using the nv driver)
08:08 < Natureshadow> imirkin: it works with the nvidia driver
08:08 < imirkin> hm, ok
08:09 < Natureshadow> And GRUB can set the 1440x900 mode
08:09 < Natureshadow> So I assume VESA works as well
08:09 < imirkin> right, but that's a different mechanism
08:09 < Natureshadow> ok
08:09 < imirkin> what makes you say that edid is broken? is it broken with nvidia driver as well?
08:09 < Natureshadow> In any case, installing the nvidia-glx driver and loading the EDID file with X.org rather than at boot (nvidia does
not support modesetting) works
08:10 < Natureshadow> imirkin: Yes, it is.
08:10 < imirkin> k
08:10 < Natureshadow> The display EDID is corrupted, I have been loading that EDID file forever with the nvidia driver
08:10 < Natureshadow> But as nouveau works great on all other hardware I have, I wanted to get rid of that unnecessary binary blob ;)
08:11 < imirkin> yeah, for some reason the EVO commands just aren't working
08:11 < Natureshadow> Is that something I can fix ;)?
08:11 < imirkin> (these are commands used to control the display engine, which controls the mode/etc)
08:11 < imirkin> well, if the nvidia driver works, it must be fixable
08:11 < Natureshadow> ok :D
08:11 < imirkin> the question is... how
08:12 < Natureshadow> I'm sure that question is a lot easier for you than for me ;)
08:12 < Natureshadow> I'm ready for any debugging, may it be as crazy as you like .)
08:14 < imirkin> well, the command likely comes from evo_sync() in nv50_display.c
08:14 < imirkin> or perhaps nv50_display_flip_stop
08:15 < imirkin> but why does it error out? who knows. i don't know much about the evo bits.
08:16 < Natureshadow> imirkin: hmm. so, seeing that the nvidia driver works, is this a bug in nouveau I should report, or is it due to my
broken hardware?
08:16 < imirkin> given that the nvidia driver can work, it seems likely that it's a bug in nouveau
[...]
08:33 < imirkin> it kinda feels like the evo engine isn't being turned on at all
08:34 < imirkin> probably some missed register write somewhere
08:34 < imirkin> (whereby it normally starts out as 'on' for everone except you)
I must add two things:
1. The display EDID of this device is corrupted, but I have worked
around that by ...
2. ... re-compiling the kernelpackage with DRM_LOAD_EDID_FIRMWARE,
and apparently that works (see attached dmesg). So I think that
the EVO issue is unrelated to the EDID corruption.
The effect of this issue is that when modesetting, some garbage is
written to the screen, the scrollback buffer is scrolled up a bit, but
modesetting never really happens.
Attached is the complete dmesg output and the VBIOS, as requested by
upstream.
- -- Package-specific info:
** Version:
Linux version 3.11-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.5-1 (2013-10-17)
** Kernel log: boot messages should be attached
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: SR700
product_version: 07SR
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: 07SR
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: SR700
board_version:
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2000000-d4ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d5404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d5400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4142
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d5000000-d50fffff
Prefetchable memory behind bridge: 00000000d5500000-00000000d57fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41b1
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d5100000-d51fffff
Prefetchable memory behind bridge: 00000000d5200000-00000000d53fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41d1
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=03 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 03) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 18e0 [size=16]
Region 5: I/O ports at 18d0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d5404800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [GeForce 8600M GS] [10de:0425] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13)
Subsystem: Samsung Electronics Co Ltd Device [144d:c519]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d5000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at d5500000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon 88E8055 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon 88E8055
[EC] Engineering changes: Rev. 1.3
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG6D531B
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41e1
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sky2
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d5100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4152
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-1f-3c-ff-ff-6d-26-4e
Kernel driver in use: iwl3945
** USB devices:
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0ac8:c302 Z-Star Microelectronics Corp. Vega USB 2.0 Camera
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- -- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.11-1 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=en_US.UTF-8
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-19
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
- -- debconf information excluded
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=m8Zt
-----END PGP SIGNATURE-----
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11-1+edid.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-1) ) #1 SMP Debian 3.11.5-1 (2013-10-28) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-1+edid.1-amd64 root=/dev/mapper/fabiannb--vg-root ro drm_kms_helper.edid_firmware=LVDS-1:edid/samsung-panel.bin video=LVDS-1:1440x900-24@60e [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. SR700/SR700, BIOS 07SR 05/21/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f6e50-0x000f6e5f] mapped at [ffff8800000f6e50] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01873000, 0x01873fff] PGTABLE [ 0.000000] BRK [0x01874000, 0x01874fff] PGTABLE [ 0.000000] BRK [0x01875000, 0x01875fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x01876000, 0x01876fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfecffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfecffff] page 4k [ 0.000000] RAMDISK: [mem 0x367a0000-0x373c7fff] [ 0.000000] ACPI: RSDP 00000000000f6e20 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bfed6f5a 000A4 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfedfb9a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bfed8f52 06BD4 (v02 INTEL CRESTLNE 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040 [ 0.000000] ACPI: APIC 00000000bfedfc8e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000bfedfcf6 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bfedfd2e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 00000000bfedfd6a 00032 (v01 Intel CRESTLN 06040000 00005A52) [ 0.000000] ACPI: TMOR 00000000bfedfd9c 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 00000000bfedfdc2 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000bfedfe2a 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000bfed8903 0064F (v01 SataRe SataPri 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed8271 00692 (v01 SataRe SataSec 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed81f4 0007D (v01 BrtRef NVIDBRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed758a 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed74e4 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed6ffe 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfecffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1048174 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10692 pages used for memmap [ 0.000000] DMA32 zone: 782032 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfed0000-0xbfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85248 r8192 d21248 u1048576 [ 0.000000] pcpu-alloc: s85248 r8192 d21248 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033821 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-1+edid.1-amd64 root=/dev/mapper/fabiannb--vg-root ro drm_kms_helper.edid_firmware=LVDS-1:edid/samsung-panel.bin video=LVDS-1:1440x900-24@60e [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4047588K/4192696K available (3667K kernel code, 636K rwdata, 1572K rodata, 920K init, 924K bss, 145108K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1828.666 MHz processor [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.33 BogoMIPS (lpj=7314664) [ 0.004194] pid_max: default: 32768 minimum: 301 [ 0.004354] Security Framework initialized [ 0.004453] AppArmor: AppArmor disabled by boot time parameter [ 0.004548] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.005294] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010934] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012565] Mount-cache hash table entries: 256 [ 0.013081] Initializing cgroup subsys memory [ 0.013206] Initializing cgroup subsys devices [ 0.013298] Initializing cgroup subsys freezer [ 0.013397] Initializing cgroup subsys net_cls [ 0.013496] Initializing cgroup subsys blkio [ 0.013589] Initializing cgroup subsys perf_event [ 0.013728] CPU: Physical Processor ID: 0 [ 0.013822] CPU: Processor Core ID: 0 [ 0.013920] mce: CPU supports 6 MCE banks [ 0.014024] CPU0: Thermal monitoring enabled (TM2) [ 0.014126] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.014126] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.014126] tlb_flushall_shift: -1 [ 0.014374] Freeing SMP alternatives memory: 12K (ffffffff81787000 - ffffffff8178a000) [ 0.015152] ACPI: Core revision 20130517 [ 0.022921] ACPI: All ACPI Tables successfully acquired [ 0.024656] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067709] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz (fam: 06, model: 0f, stepping: 0d) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] perf_event_intel: PEBS disabled due to CPU errata [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] smpboot: Booting Node 0, Processors #1 OK [ 0.083367] Brought up 2 CPUs [ 0.083482] smpboot: Total of 2 processors activated (7314.66 BogoMIPS) [ 0.083711] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.088084] devtmpfs: initialized [ 0.094186] PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfee2fff] (77824 bytes) [ 0.094186] NET: Registered protocol family 16 [ 0.094186] ACPI: bus type PCI registered [ 0.094186] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.100120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.100251] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.113819] PCI: Using configuration type 1 for base access [ 0.116115] bio: create slab <bio-0> at 0 [ 0.116193] ACPI: Added _OSI(Module Device) [ 0.116194] ACPI: Added _OSI(Processor Device) [ 0.116308] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.116420] ACPI: Added _OSI(Processor Aggregator Device) [ 0.121487] ACPI: EC: Look up EC in DSDT [ 0.125187] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.129018] ACPI: SSDT 00000000bfed7e88 002A4 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.129815] ACPI: Dynamic OEM Table Load: [ 0.130118] ACPI: SSDT (null) 002A4 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.130632] ACPI: SSDT 00000000bfed77e9 0061A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.131392] ACPI: Dynamic OEM Table Load: [ 0.131694] ACPI: SSDT (null) 0061A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.132425] ACPI: SSDT 00000000bfed812c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.133207] ACPI: Dynamic OEM Table Load: [ 0.133512] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.133961] ACPI: SSDT 00000000bfed7e03 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.134728] ACPI: Dynamic OEM Table Load: [ 0.135028] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.136081] ACPI: Interpreter enabled [ 0.136191] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.136517] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.136860] ACPI: (supports S0 S3 S4 S5) [ 0.136972] ACPI: Using IOAPIC for interrupt routing [ 0.137125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.137441] ACPI: No dock devices found. [ 0.148536] ACPI: Power Resource [FN00] (off) [ 0.149841] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.149960] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.150089] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.151682] PCI host bridge to bus 0000:00 [ 0.151799] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.152007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.152125] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.152241] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.152357] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.152474] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.152591] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.152708] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.152828] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.152960] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.153158] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 [ 0.153229] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.153490] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.153643] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f] [ 0.153877] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.154026] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f] [ 0.154302] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.154367] pci 0000:00:1a.7: reg 0x10: [mem 0xd5404000-0xd54043ff] [ 0.154649] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.154866] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.154922] pci 0000:00:1b.0: reg 0x10: [mem 0xd5400000-0xd5403fff 64bit] [ 0.155197] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.155321] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.155530] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.155828] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.156134] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.156423] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.156640] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.156935] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.157153] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.157304] pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f] [ 0.157527] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.157681] pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f] [ 0.157910] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.158062] pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f] [ 0.158322] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.158383] pci 0000:00:1d.7: reg 0x10: [mem 0xd5404400-0xd54047ff] [ 0.158663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.158859] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.159231] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.159467] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] [ 0.159609] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.159734] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.159867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.160256] pci 0000:00:1f.2: [8086:2828] type 00 class 0x010180 [ 0.160313] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.160345] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.160375] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.160406] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.160436] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef] [ 0.160468] pci 0000:00:1f.2: reg 0x24: [io 0x18d0-0x18df] [ 0.160590] pci 0000:00:1f.2: PME# supported from D3hot [ 0.160765] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.160811] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 0.160925] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f] [ 0.161267] pci 0000:01:00.0: [10de:0425] type 00 class 0x030000 [ 0.161293] pci 0000:01:00.0: reg 0x10: [mem 0xd4000000-0xd4ffffff] [ 0.161319] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.161346] pci 0000:01:00.0: reg 0x1c: [mem 0xd2000000-0xd3ffffff 64bit] [ 0.161365] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.161384] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.168021] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.168137] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.168144] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd4ffffff] [ 0.168152] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.168519] pci 0000:02:00.0: [11ab:4363] type 00 class 0x020000 [ 0.168676] pci 0000:02:00.0: reg 0x10: [mem 0xd5000000-0xd5003fff 64bit] [ 0.168765] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff] [ 0.169066] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.169563] pci 0000:02:00.0: supports D1 D2 [ 0.169568] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.169694] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.169998] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.170121] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.170134] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd50fffff] [ 0.170462] pci 0000:04:00.0: [8086:4222] type 00 class 0x028000 [ 0.170525] pci 0000:04:00.0: reg 0x10: [mem 0xd5100000-0xd5100fff] [ 0.170976] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.171066] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.171274] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.171470] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.171564] pci 0000:00:1c.1: bridge window [mem 0xd5100000-0xd51fffff] [ 0.171751] acpiphp: Slot [1] registered [ 0.171847] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.171938] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.171947] pci 0000:00:1c.2: bridge window [mem 0xd6000000-0xd7ffffff] [ 0.171959] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.172107] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.172212] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.172217] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.172223] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.172228] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.172234] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.172239] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.172245] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.172250] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.172700] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10 [ 0.173165] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) *10 [ 0.173625] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5 [ 0.174085] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.174477] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.175005] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.175397] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.175789] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.176406] ACPI: Enabled 7 GPEs in block 00 to 1F [ 0.176560] ACPI: \_SB_.PCI0: notify handler is installed [ 0.176637] Found 1 acpi root devices [ 0.176749] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.176952] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.176952] vgaarb: loaded [ 0.176952] vgaarb: bridge control possible 0000:01:00.0 [ 0.176952] PCI: Using ACPI for IRQ routing [ 0.191913] PCI: pci_cache_line_size set to 64 bytes [ 0.192054] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.192059] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff] [ 0.192313] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.192406] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.192760] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.194873] Switched to clocksource hpet [ 0.195829] pnp: PnP ACPI init [ 0.195937] ACPI: bus type PNP registered [ 0.196317] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.196408] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.196498] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.196586] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.196675] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.196763] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.196852] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.196941] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.197032] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.197401] pnp 00:01: [dma 4] [ 0.197469] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.197534] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.197728] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.197819] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.197903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.198020] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.198109] system 00:05: [io 0x06b0-0x06ff] has been reserved [ 0.198197] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.198286] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.198375] system 00:05: [io 0x1000-0x107f] could not be reserved [ 0.198462] system 00:05: [io 0x1180-0x11bf] has been reserved [ 0.198550] system 00:05: [io 0x1640-0x164f] has been reserved [ 0.198637] system 00:05: [io 0xfe00] has been reserved [ 0.198726] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.198799] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.198909] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.198982] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.199477] pnp: PnP ACPI: found 9 devices [ 0.199562] ACPI: bus type PNP unregistered [ 0.208297] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-03] add_size 200000 [ 0.208316] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 04-05] add_size 1000 [ 0.208323] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000 [ 0.208355] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment [ 0.208449] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.208455] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.208460] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.208471] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd5500000-0xd57fffff pref] [ 0.208574] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd5200000-0xd53fffff 64bit pref] [ 0.208676] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.208766] pci 0000:00:1f.3: BAR 0: assigned [mem 0xd5404800-0xd54048ff] [ 0.208864] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.208954] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.209041] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.209130] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd4ffffff] [ 0.209220] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.209325] pci 0000:02:00.0: BAR 6: assigned [mem 0xd5500000-0xd551ffff pref] [ 0.209425] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.209513] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.209605] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd50fffff] [ 0.209698] pci 0000:00:1c.0: bridge window [mem 0xd5500000-0xd57fffff pref] [ 0.209804] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.209893] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.209987] pci 0000:00:1c.1: bridge window [mem 0xd5100000-0xd51fffff] [ 0.210078] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd53fffff 64bit pref] [ 0.210184] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.210272] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.210366] pci 0000:00:1c.2: bridge window [mem 0xd6000000-0xd7ffffff] [ 0.210458] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.210564] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.211749] pci 0000:00:1e.0: setting latency timer to 64 [ 0.211758] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.211763] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.211768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.211773] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.211778] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.211782] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.211787] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.211792] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.211797] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.211802] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd4ffffff] [ 0.211807] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.211812] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.211816] pci_bus 0000:02: resource 1 [mem 0xd5000000-0xd50fffff] [ 0.211821] pci_bus 0000:02: resource 2 [mem 0xd5500000-0xd57fffff pref] [ 0.211826] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] [ 0.211831] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff] [ 0.211836] pci_bus 0000:04: resource 2 [mem 0xd5200000-0xd53fffff 64bit pref] [ 0.211841] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.211846] pci_bus 0000:06: resource 1 [mem 0xd6000000-0xd7ffffff] [ 0.211850] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.211856] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.211860] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.211865] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.211870] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.211874] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.211879] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.211884] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.211889] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.211972] NET: Registered protocol family 2 [ 0.212460] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.212937] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.213306] TCP: Hash tables configured (established 32768 bind 32768) [ 0.213464] TCP: reno registered [ 0.213562] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.213691] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.213916] NET: Registered protocol family 1 [ 0.217845] pci 0000:01:00.0: Boot video device [ 0.217881] PCI: CLS 64 bytes, default 64 [ 0.217955] Unpacking initramfs... [ 0.693654] Freeing initrd memory: 12448K (ffff8800367a0000 - ffff8800373c8000) [ 0.693767] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.693856] software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff] [ 0.694037] Simple Boot Flag at 0x36 set to 0x1 [ 0.694803] audit: initializing netlink socket (disabled) [ 0.694916] type=2000 audit(1383115959.692:1): initialized [ 0.734075] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.734905] VFS: Disk quotas dquot_6.5.2 [ 0.735029] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.735258] msgmni has been set to 7929 [ 0.735731] alg: No test for stdrng (krng) [ 0.735855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.736014] io scheduler noop registered [ 0.736099] io scheduler deadline registered [ 0.736206] io scheduler cfq registered (default) [ 0.736442] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.736550] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.736684] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.736815] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.736967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.737083] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.737292] intel_idle: does not run on family 6 model 15 [ 0.737360] GHES: HEST is not enabled! [ 0.737542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.738546] Linux agpgart interface v0.103 [ 0.738953] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.746995] i8042: Detected active multiplexing controller, rev 1.1 [ 0.749065] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.749157] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.749288] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.749413] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.749537] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.749836] mousedev: PS/2 mouse device common for all mice [ 0.750200] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.750326] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.750434] cpuidle: using governor ladder [ 0.750518] cpuidle: using governor menu [ 0.750605] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 0.750690] AMD IOMMUv2 functionality not available on this system [ 0.750924] TCP: cubic registered [ 0.751062] NET: Registered protocol family 10 [ 0.751489] mip6: Mobile IPv6 [ 0.751574] NET: Registered protocol family 17 [ 0.751661] mpls_gso: MPLS GSO support [ 0.752185] PM: Hibernation image not present or could not be loaded. [ 0.752211] registered taskstats version 1 [ 0.753429] rtc_cmos 00:06: setting system clock to 2013-10-30 06:52:40 UTC (1383115960) [ 0.755546] Freeing unused kernel memory: 920K (ffffffff816a1000 - ffffffff81787000) [ 0.755645] Write protecting the kernel read-only data: 6144k [ 0.758289] Freeing unused kernel memory: 420K (ffff880001397000 - ffff880001400000) [ 0.761114] Freeing unused kernel memory: 476K (ffff880001589000 - ffff880001600000) [ 0.777739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.888603] systemd-udevd[59]: starting version 204 [ 0.919388] ACPI: bus type USB registered [ 0.919535] usbcore: registered new interface driver usbfs [ 0.919642] usbcore: registered new interface driver hub [ 0.935705] usbcore: registered new device driver usb [ 0.936568] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.937076] uhci_hcd: USB Universal Host Controller Interface driver [ 0.937499] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.937507] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.937604] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.937768] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.937930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.938021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.938120] usb usb1: Product: UHCI Host Controller [ 0.938208] usb usb1: Manufacturer: Linux 3.11-1+edid.1-amd64 uhci_hcd [ 0.938298] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.938617] hub 1-0:1.0: USB hub found [ 0.938713] hub 1-0:1.0: 2 ports detected [ 0.938989] ehci-pci: EHCI PCI platform driver [ 0.939276] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.939284] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.939378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 0.939526] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.939668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.939758] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.939856] usb usb2: Product: UHCI Host Controller [ 0.939942] usb usb2: Manufacturer: Linux 3.11-1+edid.1-amd64 uhci_hcd [ 0.940094] usb usb2: SerialNumber: 0000:00:1a.1 [ 0.941416] hub 2-0:1.0: USB hub found [ 0.941511] hub 2-0:1.0: 2 ports detected [ 0.942186] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.942194] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.942292] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.942450] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.942600] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.942691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.942792] usb usb3: Product: UHCI Host Controller [ 0.942879] usb usb3: Manufacturer: Linux 3.11-1+edid.1-amd64 uhci_hcd [ 0.942968] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.943575] hub 3-0:1.0: USB hub found [ 0.943670] hub 3-0:1.0: 2 ports detected [ 0.944223] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.944230] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.944328] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 0.944488] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.944639] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.944731] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.944831] usb usb4: Product: UHCI Host Controller [ 0.944919] usb usb4: Manufacturer: Linux 3.11-1+edid.1-amd64 uhci_hcd [ 0.945011] usb usb4: SerialNumber: 0000:00:1d.1 [ 0.945284] hub 4-0:1.0: USB hub found [ 0.945378] hub 4-0:1.0: 2 ports detected [ 0.946051] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.946059] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.946156] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 0.946312] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.946457] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.946547] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946646] usb usb5: Product: UHCI Host Controller [ 0.946734] usb usb5: Manufacturer: Linux 3.11-1+edid.1-amd64 uhci_hcd [ 0.946824] usb usb5: SerialNumber: 0000:00:1d.2 [ 0.947115] hub 5-0:1.0: USB hub found [ 0.947208] hub 5-0:1.0: 2 ports detected [ 0.948762] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 0.949073] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.949174] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 0.949294] ehci-pci 0000:00:1a.7: debug port 1 [ 0.953312] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.955740] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.955835] ACPI: Thermal Zone [TZ00] (35 C) [ 0.956542] ehci-pci 0000:00:1a.7: irq 18, io mem 0xd5404000 [ 0.957412] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.957503] ACPI: Thermal Zone [TZ01] (35 C) [ 0.968043] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.968208] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.968300] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.968402] usb usb6: Product: EHCI Host Controller [ 0.968488] usb usb6: Manufacturer: Linux 3.11-1+edid.1-amd64 ehci_hcd [ 0.968577] usb usb6: SerialNumber: 0000:00:1a.7 [ 0.968871] hub 6-0:1.0: USB hub found [ 0.968963] hub 6-0:1.0: 4 ports detected [ 0.989311] sky2: driver version 1.30 [ 0.989755] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 0.990161] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 0.991366] ACPI: Fan [FAN0] (off) [ 0.992218] hub 1-0:1.0: USB hub found [ 0.992317] hub 1-0:1.0: 2 ports detected [ 0.995714] sky2 0000:02:00.0 eth0: addr 00:13:77:6d:53:1b [ 1.001962] SCSI subsystem initialized [ 1.011694] ACPI: bus type ATA registered [ 1.011882] libata version 3.00 loaded. [ 1.016215] hub 2-0:1.0: USB hub found [ 1.016313] hub 2-0:1.0: 2 ports detected [ 1.016854] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 1.017310] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.017409] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 1.017532] ehci-pci 0000:00:1d.7: debug port 1 [ 1.021547] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.021754] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5404400 [ 1.032036] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.032173] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.032266] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.032365] usb usb7: Product: EHCI Host Controller [ 1.032459] usb usb7: Manufacturer: Linux 3.11-1+edid.1-amd64 ehci_hcd [ 1.032549] usb usb7: SerialNumber: 0000:00:1d.7 [ 1.032841] hub 7-0:1.0: USB hub found [ 1.032932] hub 7-0:1.0: 6 ports detected [ 1.056135] hub 3-0:1.0: USB hub found [ 1.056235] hub 3-0:1.0: 2 ports detected [ 1.080121] hub 4-0:1.0: USB hub found [ 1.080221] hub 4-0:1.0: 2 ports detected [ 1.104119] hub 5-0:1.0: USB hub found [ 1.104218] hub 5-0:1.0: 2 ports detected [ 1.104699] ata_piix 0000:00:1f.2: version 2.13 [ 1.105006] ata_piix 0000:00:1f.2: MAP [ [ 1.105093] P0 P2 IDE IDE ] [ 1.260048] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.260641] scsi0 : ata_piix [ 1.261287] scsi1 : ata_piix [ 1.261996] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 1.262085] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 1.280035] usb 6-1: new high-speed USB device number 2 using ehci-pci [ 1.424501] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC04, max UDMA/33 [ 1.424845] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB012A, max UDMA/100 [ 1.424933] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.432410] ata1.00: configured for UDMA/100 [ 1.432695] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 [ 1.440279] ata2.00: configured for UDMA/33 [ 1.446157] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H SC04 PQ: 0 ANSI: 5 [ 1.452810] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.453047] sd 0:0:0:0: [sda] Write Protect is off [ 1.453136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.453196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.460171] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.460270] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.460674] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.463765] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.463947] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.485594] sda: sda1 sda2 < sda5 > [ 1.486380] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.504439] usb 6-1: New USB device found, idVendor=0ac8, idProduct=c302 [ 1.504534] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.504622] usb 6-1: Product: Vega USB 2.0 Camera. [ 1.504709] usb 6-1: Manufacturer: Vimicro Corp. [ 1.692030] tsc: Refined TSC clocksource calibration: 1828.749 MHz [ 1.751817] device-mapper: uevent: version 1.0.3 [ 1.752042] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 2.692124] Switched to clocksource tsc [ 15.168251] bio: create slab <bio-1> at 1 [ 15.430128] bio: create slab <bio-1> at 1 [ 15.809739] PM: Starting manual resume from disk [ 15.809745] PM: Hibernation image partition 254:2 present [ 15.809748] PM: Looking for hibernation image. [ 15.810156] PM: Image not found (code -22) [ 15.810160] PM: Hibernation image not present or could not be loaded. [ 15.828499] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 15.828505] EXT4-fs (dm-1): write access will be enabled during recovery [ 16.771638] EXT4-fs (dm-1): recovery complete [ 16.778713] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 18.650625] systemd-udevd[389]: starting version 204 [ 19.249983] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 19.250040] ACPI: Lid Switch [LID0] [ 19.250139] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 19.250147] ACPI: Power Button [PWRB] [ 19.250237] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 19.250243] ACPI: Sleep Button [SLPB] [ 19.250334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 19.250340] ACPI: Power Button [PWRF] [ 19.257123] ACPI: AC Adapter [ADP1] (on-line) [ 19.289765] ACPI: Battery Slot [BAT1] (battery present) [ 19.582487] media: Linux media interface: v0.10 [ 19.583190] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 19.583201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.583207] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 19.583215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.583219] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 19.583226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.583229] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 19.650183] ACPI: Requesting acpi_cpufreq [ 19.652727] Monitor-Mwait will be used to enter C-1 state [ 19.652738] Monitor-Mwait will be used to enter C-2 state [ 19.652745] tsc: Marking TSC unstable due to TSC halts in idle [ 19.652755] ACPI: acpi_idle registered with cpuidle [ 19.654789] Switched to clocksource hpet [ 19.766164] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251) [ 19.766176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.972309] Linux video capture interface: v2.00 [ 19.997449] acpi device:04: registered as cooling_device3 [ 19.997510] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no) [ 19.997600] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5 [ 20.312860] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 20.373031] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 20.382521] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 20.382595] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 20.412613] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) [ 20.415006] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb6/6-1/6-1:1.0/input/input9 [ 20.415048] usbcore: registered new interface driver uvcvideo [ 20.415051] USB Video Class driver (1.1.1) [ 20.457250] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 20.518140] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 20.523232] [drm] Initialized drm 1.1.0 20060810 [ 20.574179] cfg80211: Calling CRDA to update world regulatory domain [ 20.641981] wmi: Mapper loaded [ 20.655598] Error: Driver 'pcspkr' is already registered, aborting... [ 20.806365] samsung_laptop: detected SABI interface: SwSmi@ [ 20.806371] samsung_laptop: Backlight controlled by ACPI video driver [ 20.850756] iTCO_vendor_support: vendor-support=0 [ 20.851652] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 20.851697] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 20.851999] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.862397] platform microcode: firmware: agent aborted loading intel-ucode/06-0f-0d (not found?) [ 20.862505] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 20.893242] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 437321 [ 20.929233] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 20.991066] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 20.991071] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 20.991143] iwl3945 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 21.048084] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 21.048091] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 21.048171] iwl3945 0000:04:00.0: irq 46 for MSI/MSI-X [ 21.107607] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 21.255225] platform microcode: firmware: agent aborted loading intel-ucode/06-0f-0d (not found?) [ 21.256542] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 21.495307] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086500a2 [ 21.495313] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86) [ 21.495316] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 21.496306] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 21.568932] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 21.568936] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 21.569134] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 21.569139] nouveau [ VBIOS][0000:01:00.0] version 60.86.57.00.00 [ 21.589510] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3 [ 21.589515] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB [ 21.589518] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags [ 21.613716] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 21.613726] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 21.613731] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 21.613753] nouveau E[ PTHERM][0000:01:00.0] unhandled intr 0x000001e1 [ 21.613934] [TTM] Zone kernel: Available graphics memory: 2030932 kiB [ 21.613937] [TTM] Initializing pool allocator [ 21.613943] [TTM] Initializing DMA pool allocator [ 21.613957] nouveau [ DRM] VRAM: 256 MiB [ 21.613960] nouveau [ DRM] GART: 1048576 MiB [ 21.613966] nouveau [ DRM] TMDS table version 2.0 [ 21.613969] nouveau [ DRM] DCB version 4.0 [ 21.613973] nouveau [ DRM] DCB outp 00: 01000323 00010034 [ 21.613976] nouveau [ DRM] DCB outp 01: 02011300 00000028 [ 21.613980] nouveau [ DRM] DCB outp 02: 02022312 00020010 [ 21.613983] nouveau [ DRM] DCB conn 00: 0040 [ 21.613986] nouveau [ DRM] DCB conn 01: 0100 [ 21.613989] nouveau [ DRM] DCB conn 02: 1261 [ 21.634180] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.634183] [drm] No driver support for vblank timestamp query. [ 21.634187] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 21.634276] nouveau [ DRM] 3 available performance level(s) [ 21.634281] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1200mV fanspeed 100% [ 21.634287] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 301MHz voltage 1200mV fanspeed 100% [ 21.634293] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 700MHz voltage 1200mV fanspeed 100% [ 21.634298] nouveau [ DRM] c: core 275MHz shader 550MHz memory 302MHz voltage 1200mV [ 21.656609] nouveau [ DRM] MM: using CRYPT for buffer copies [ 21.656624] [drm] forcing LVDS-1 connector ON [ 21.721928] platform LVDS-1: firmware: agent loaded edid/samsung-panel.bin into memory [ 21.722064] [drm] Got external EDID base block and 0 extensions from "edid/samsung-panel.bin" for connector "LVDS-1" [ 21.740299] nouveau [ DRM] allocated 1440x900 fb: 0x70000, bo ffff880139701800 [ 21.740405] fbcon: nouveaufb (fb0) is primary device [ 21.747243] nouveau E[ PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x000d5080 [ 21.747270] nouveau E[ PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x100d5080 [ 21.809682] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 437321 [ 21.847760] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 22.061120] cfg80211: World regulatory domain updated: [ 22.061122] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.061124] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.061126] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.061128] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 22.061130] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.061132] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.747511] nouveau E[ PDISP][0000:01:00.0] chid 1 mthd 0x0080 data 0x00000000 0x000b5080 [ 23.760391] Console: switching to colour frame buffer device 180x56 [ 23.773454] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 23.773461] nouveau 0000:01:00.0: registered panic notifier [ 23.773497] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 24.664316] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 24.960541] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 26.073525] Adding 8388604k swap on /dev/mapper/fabiannb--vg-swap_1. Priority:-1 extents:1 across:8388604k [ 27.856071] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 27.857985] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 28.825684] sky2 0000:02:00.0 eth0: enabling interface [ 28.826336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.068604] RPC: Registered named UNIX socket transport module. [ 29.068610] RPC: Registered udp transport module. [ 29.068612] RPC: Registered tcp transport module. [ 29.068614] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 29.129466] FS-Cache: Loaded [ 29.163488] FS-Cache: Netfs 'nfs' registered for caching [ 29.271810] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 31.330340] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 31.444563] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 31.444595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.949058] Bluetooth: Core ver 2.16 [ 32.949091] NET: Registered protocol family 31 [ 32.949093] Bluetooth: HCI device and connection manager initialized [ 32.949109] Bluetooth: HCI socket layer initialized [ 32.949113] Bluetooth: L2CAP socket layer initialized [ 32.949122] Bluetooth: SCO socket layer initialized [ 33.000118] Bluetooth: RFCOMM TTY layer initialized [ 33.000134] Bluetooth: RFCOMM socket layer initialized [ 33.000137] Bluetooth: RFCOMM ver 1.11 [ 33.205501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.205507] Bluetooth: BNEP filters: protocol multicast [ 33.205522] Bluetooth: BNEP socket layer initialized
Attachment:
vbios.rom
Description: Binary data