--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: 2.6.38-2-686: wifi module for rt 2860 doesn't work after suspending on my eeepc
- From: Antonino Arcudi <antonino.arcudi@gmail.com>
- Date: Sat, 16 Apr 2011 16:16:01 +0200
- Message-id: <20110416141601.4011.25542.reportbug@Njordr>
Package: linux-2.6
Version: 2.6.38-3
Severity: important
File: 2.6.38-2-686
When resuming it doesn't configure interface and give me a lot of this output
in the dmesg and the tty:
[ 1367.409401] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x00001020, value=0xffffffff
[ 1367.419726] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x00001020, value=0xffffffff
[ 1367.429857] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x00001020, value=0xffffffff
[ 1367.439984] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x00001020, value=0xffffffff
[ 1367.450115] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x00001020, value=0xffffffff
[ 1367.460245] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x0000101c, value=0xffffffff
[ 1367.470428] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access
failed: offset=0x0000101c, value=0xfffffff
And this at boot, if it's related to:
phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from
hardware
-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=57474fc3-710c-4a7c-bbdb-b54da0704abb ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 12.904265] Monitor-Mwait will be used to enter C-3 state
[ 12.904298] Marking TSC unstable due to TSC halts in idle
[ 12.904985] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 12.905159] ACPI: Power Button [PWRF]
[ 12.924823] Switching to clocksource hpet
[ 12.933912] leds_ss4200: no LED devices found
[ 12.955055] ACPI: AC Adapter [AC0] (off-line)
[ 13.232646] cfg80211: Calling CRDA to update world regulatory domain
[ 13.424218] ACPI: Battery Slot [BAT0] (battery present)
[ 13.517127] eeepc_laptop: Eee PC Hotkey Driver
[ 13.517153] eeepc_laptop: Hotkey init flags 0x41
[ 13.536982] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 13.543466] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 13.543486] eeepc_laptop: Get control methods supported: 0x6101713
[ 13.610748] [drm] Initialized drm 1.1.0 20060810
[ 13.701303] elantech: assuming hardware version 2, firmware version 2.0.48
[ 13.776283] elantech: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 13.812194] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 13.921206] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.921224] i915 0000:00:02.0: setting latency timer to 64
[ 13.963729] rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.963754] rt2800pci 0000:01:00.0: setting latency timer to 64
[ 13.986712] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.986722] [drm] Driver supports precise vblank timestamp query.
[ 13.990858] usb 1-8: New USB device found, idVendor=04f2, idProduct=b071
[ 13.990871] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 13.990881] usb 1-8: Product: CNF7129
[ 13.990888] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
[ 13.990895] usb 1-8: SerialNumber: SN0001
[ 14.047689] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input7
[ 14.047908] composite sync not supported
[ 14.063381] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.064058] [drm] initialized overlay support
[ 14.064329] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[ 14.172816] Linux video capture interface: v2.00
[ 14.216436] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 14.233131] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 14.233367] usbcore: registered new interface driver uvcvideo
[ 14.233376] USB Video Class driver (v1.0.0)
[ 14.370215] composite sync not supported
[ 14.412085] Console: switching to colour frame buffer device 128x37
[ 14.423730] fb0: inteldrmfb frame buffer device
[ 14.423738] drm: registered panic notifier
[ 14.424219] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.570774] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.572781] Registered led device: rt2800pci-phy0::radio
[ 14.572890] Registered led device: rt2800pci-phy0::assoc
[ 14.572991] Registered led device: rt2800pci-phy0::quality
[ 14.696428] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.696546] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.696608] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.799721] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.800105] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.902948] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 15.913961] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 16.286684] EXT4-fs (sda1): re-mounted. Opts: user_xattr,errors=remount-ro
[ 16.442072] loop: module loaded
[ 17.959833] EXT3-fs: barriers not enabled
[ 17.960256] kjournald starting. Commit interval 5 seconds
[ 17.960794] EXT3-fs (sda6): using internal journal
[ 17.960806] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 18.022222] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 18.722209] fuse init (API version 7.16)
[ 20.334953] ATL1E 0000:03:00.0: irq 45 for MSI/MSI-X
[ 20.344363] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.455918] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.590985] Disabling lock debugging due to kernel taint
[ 20.596788] composite sync not supported
[ 20.628397] composite sync not supported
[ 20.837052] vboxdrv: Found 2 processor cores.
[ 20.838755] vboxdrv: fAsync=0 offMin=0x17c offMax=0x8b6
[ 20.841528] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.841540] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000).
[ 20.921096] lp: driver loaded but no devices found
[ 20.965406] ppdev: user-space parallel port driver
[ 21.005014] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[ 21.005030] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[ 21.005037] parport 0x378: You gave this address, but there is probably no parallel port there!
[ 21.005073] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.100578] lp0: using parport0 (interrupt-driven).
[ 21.788128] usb 1-8: USB disconnect, address 2
[ 23.153148] wlan0: authenticate with 00:90:d0:4a:ac:d5 (try 1)
[ 23.154695] wlan0: authenticated
[ 23.154758] wlan0: associate with 00:90:d0:4a:ac:d5 (try 1)
[ 23.157099] wlan0: RX AssocResp from 00:90:d0:4a:ac:d5 (capab=0x401 status=0 aid=2)
[ 23.157111] wlan0: associated
[ 23.158969] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.048110] EXT4-fs (sda1): re-mounted. Opts: user_xattr,errors=remount-ro,commit=600
[ 32.367076] EXT4-fs (sda7): re-mounted. Opts: user_xattr,commit=600
[ 32.999835] composite sync not supported
[ 34.048039] wlan0: no IPv6 routers present
[ 47.388927] composite sync not supported
[ 47.477185] composite sync not supported
[ 47.575551] composite sync not supported
[ 47.677802] composite sync not supported
[ 47.762023] composite sync not supported
[ 47.881533] composite sync not supported
[ 48.000318] composite sync not supported
[ 48.087614] composite sync not supported
[ 97.263383] exe (2582): /proc/2582/oom_adj is deprecated, please use /proc/2582/oom_score_adj instead.
** Model information
not available
** Loaded modules:
Module Size Used by
vboxnetadp 13120 0
vboxnetflt 23683 0
parport_pc 21895 1
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
vboxdrv 147237 2 vboxnetadp,vboxnetflt
binfmt_misc 12778 1
fuse 55640 1
ext3 98001 1
jbd 40818 1 ext3
loop 17805 0
snd_hda_codec_realtek 207804 1
snd_hda_intel 21529 2
arc4 12418 2
joydev 16906 0
snd_hda_codec 57563 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12906 1 snd_hda_codec
uvcvideo 52490 0
videodev 48418 1 uvcvideo
ecb 12649 2
snd_pcm 52774 2 snd_hda_intel,snd_hda_codec
rt2800pci 13299 0
i915 276436 2
rt2800lib 30336 1 rt2800pci
snd_seq 39172 0
crc_ccitt 12331 1 rt2800lib
rt2x00pci 12683 1 rt2800pci
rt2x00lib 28582 3 rt2800pci,rt2800lib,rt2x00pci
snd_timer 22171 2 snd_pcm,snd_seq
drm_kms_helper 26501 1 i915
mac80211 160285 3 rt2800lib,rt2x00pci,rt2x00lib
snd_seq_device 12995 1 snd_seq
drm 128416 3 i915,drm_kms_helper
eeepc_laptop 18262 0
i2c_algo_bit 12706 1 i915
cfg80211 106889 2 rt2x00lib,mac80211
tpm_tis 12949 0
sparse_keymap 12680 1 eeepc_laptop
snd 38153 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
battery 12926 0
tpm 17454 1 tpm_tis
tpm_bios 12799 1 tpm
ac 12552 0
i2c_core 18989 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
psmouse 45863 0
evdev 13084 15
rfkill 18510 2 eeepc_laptop,cfg80211
serio_raw 12758 0
pcspkr 12515 0
rng_core 12550 0
processor 26983 2
power_supply 13283 2 ac,battery
soundcore 12878 1 snd
button 12866 1 i915
pci_hotplug 26303 1 eeepc_laptop
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
eeprom_93cx6 12423 1 rt2800pci
video 17345 1 i915
ext4 251726 2
mbcache 12810 2 ext3,ext4
jbd2 55701 1 ext4
crc16 12327 1 ext4
sd_mod 34941 5
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 0
ahci 20897 4
libahci 22161 1 ahci
uhci_hcd 21850 0
libata 131904 4 ata_generic,ata_piix,ahci,libahci
ehci_hcd 34889 0
usbcore 99058 4 uvcvideo,uhci_hcd,ehci_hcd
scsi_mod 134369 2 sd_mod,libata
thermal 13058 0
atl1e 26886 0
thermal_sys 17667 3 processor,video,thermal
nls_base 12649 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:26:18:37:4d:2f brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:25:d3:14:ff:19 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.64/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::225:d3ff:fe14:ff19/64 scope link
valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 30456 536 0 0 0 0 0 0 30456 536 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
wlan0: 45476378 35255 0 0 0 0 0 0 3277722 28848 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
35344 total packets received
0 forwarded
0 incoming packets discarded
35344 incoming packets delivered
28932 requests sent out
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 8
OutType3: 8
Tcp:
675 active connections openings
0 passive connection openings
260 failed connection attempts
152 connection resets received
9 connections established
35057 segments received
28493 segments send out
163 segments retransmited
0 bad segments received.
429 resets sent
Udp:
430 packets received
8 packets to unknown port received.
0 packet receive errors
436 packets sent
UdpLite:
TcpExt:
12 packets pruned from receive queue because of socket buffer overrun
113 TCP sockets finished time wait in fast timer
1 packets rejects in established connections because of timestamp
1960 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 39 times
24426 packet headers predicted
1578 acknowledgments not containing data payload received
558 predicted acknowledgments
28 congestion windows recovered without slow start after partial ack
2 timeouts in loss state
65 other TCP timeouts
184 packets collapsed in receive queue due to low socket buffer
16 DSACKs sent for old packets
1 DSACKs received
27 connections reset due to unexpected data
24 connections reset due to early user close
IpExt:
InMcastPkts: 162
OutMcastPkts: 140
InBcastPkts: 2
InOctets: 45006569
OutOctets: 2287411
InMcastOctets: 24818
OutMcastOctets: 20930
InBcastOctets: 656
*** Device features:
eth0: 0x11989
lo: 0x13865
vboxnet0: 0x0
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:834a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 7f800000-7f9fffff
Prefetchable memory behind bridge: 000000007fa00000-000000007fbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at f7eb7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 Network controller [0280]: Ralink corp. RT2860 [1814:0781]
Subsystem: AzureWave Device [1a3b:1059]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (800, 'unstable'), (750, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-2-686 suggests:
ii grub-pc 1.99~rc1-12 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.29 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:
--- End Message ---