--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-686: acpi_cpufreq and snd_atiixp conflict (was #362708)
- From: Sergey Spiridonov <sena@hurd.homeunix.org>
- Date: Sun, 28 Jun 2009 08:33:31 +0300
- Message-id: <20090628053331.11294.84016.reportbug@messenger>
Package: linux-image-2.6.26-2-686
Version: 2.6.26-17
Severity: normal
When acpi_cpufreq kernel module is loaded, alsa
would randomly break soon after first sound file is played.
Hardware is Toshiba Satellite a30 (lspci in attachment),
with sound card ATI Technologies Inc IXP150 AC'97 Audio Controller.
The bug appears only if acpi_cpufreq module is loaded.
Removing acpi_cpufreq using rmmod -f or
preventing it from loading heals the problem.
Sometimes mplayer prints out following in loop:
[AO_ALSA] alsa-lib: pcm_hw.c:405:(snd_pcm_hw_hwsync)
SNDRV_PCM_IOCTL_HWSYNC failed: Broken pipe
Do not know if this is related, but during boot I got
following suspicious messages (full dmesg is in
attachment):
MP-BIOS bug: 8254 timer not connected to IO-APIC
..trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
[snip]
atiixp: codec reset timeout
atiixp-modem: no codec available
Also found similar report #362708, but on Toshiba Satellite A70:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=362708
Bugreport is 3 years old. It was closed in 2008 with strange comment
"in newer kernels acpi_cpufreq is gone".
Kernel bugzilla URL: http://bugzilla.kernel.org/show_bug.cgi?id=13591
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 15:39:35 UTC 2009
** Command line:
root=/dev/mapper/messenger_main-root ro quiet
** Not tainted
** Kernel log:
[ 5.257328] USB Mass Storage support registered.
[ 5.261394] usb-storage: device found at 3
[ 5.261400] usb-storage: waiting for device to settle before scanning
[ 5.333938] usbcore: registered new interface driver hiddev
[ 5.345641] input: HID 04d9:1133 as /class/input/input1
[ 5.345641] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:13.0-2
[ 5.345641] usbcore: registered new interface driver usbhid
[ 5.345641] usbhid: v2.6:USB HID core driver
[ 5.500260] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f414b001588]
[ 5.784124] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.802458] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.851158] hda: max request size: 512KiB
[ 5.853048] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 5.854919] hda: cache flushes supported
[ 5.855000] hda: hda1 hda2 hda3
[ 6.149040] device-mapper: uevent: version 1.0.3
[ 6.151081] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.400987] PM: Starting manual resume from disk
[ 6.454212] kjournald starting. Commit interval 5 seconds
[ 6.454232] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.121935] udevd version 125 started
[ 9.813351] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.843410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.194518] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 10.260342] usb-storage: device scan complete
[ 10.262571] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB01 PQ: 0 ANSI: 0
[ 10.685577] input: Power Button (FF) as /class/input/input2
[ 10.708341] ACPI: Power Button (FF) [PWRF]
[ 10.708465] input: Lid Switch as /class/input/input3
[ 10.721105] ACPI: Lid Switch [LID]
[ 10.721222] input: Power Button (CM) as /class/input/input4
[ 10.752378] ACPI: Power Button (CM) [PWRB]
[ 10.974185] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 10.994568] ACPI: AC Adapter [ACAD] (on-line)
[ 11.745301] ACPI: Battery Slot [BAT1] (battery present)
[ 12.045027] input: Video Bus as /class/input/input5
[ 12.074806] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.368542] input: PC Speaker as /class/input/input6
[ 13.028930] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
[ 13.028959] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 13.028963] IO window: 0x0000a400-0x0000a4ff
[ 13.028970] IO window: 0x0000a800-0x0000a8ff
[ 13.028976] PREFETCH window: 0x34000000-0x343fffff
[ 13.028983] MEM window: 0x30000000-0x33ffffff
[ 13.028994] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 13.028997] Yenta: Routing CardBus interrupts to PCI
[ 13.029005] Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44
[ 13.095549] input: PS/2 Mouse as /class/input/input7
[ 13.139805] input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
[ 13.260907] Yenta: ISA IRQ mask 0x0ce8, PCI irq 16
[ 13.260914] Socket status: 30000006
[ 13.260921] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 13.260926] cs: IO port probe 0xa000-0xafff: clean.
[ 13.261299] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 13.514323] Driver 'sr' needs updating - please use bus_type methods
[ 13.531064] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.531074] Uniform CD-ROM driver Revision: 3.20
[ 13.531248] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 13.715613] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 14.005829] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.006875] atiixp: codec reset timeout
[ 14.084680] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.092590] atiixp-modem: no codec available
[ 14.092685] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 14.668266] cs: IO port probe 0x100-0x3af: clean.
[ 14.668266] cs: IO port probe 0x3e0-0x4ff: clean.
[ 14.668266] cs: IO port probe 0x820-0x8ff: clean.
[ 14.668266] cs: IO port probe 0xc00-0xcf7: clean.
[ 14.668266] cs: IO port probe 0xa00-0xaff: clean.
[ 15.742914] EXT3 FS on dm-1, internal journal
[ 16.065852] loop: module loaded
[ 17.562556] kjournald starting. Commit interval 5 seconds
[ 17.562811] EXT3 FS on dm-3, internal journal
[ 17.562820] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.629659] Adding 2928632k swap on /dev/mapper/messenger_main-swap. Priority:-1 extents:1 across:2928632k
[ 18.880583] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 21.876026] Clocksource tsc unstable (delta = 249961407 ns)
[ 22.572830] NET: Registered protocol family 10
[ 22.573332] lo: Disabled Privacy Extensions
[ 23.680676] lp: driver loaded but no devices found
[ 23.723400] ppdev: user-space parallel port driver
[ 25.645288] Bluetooth: Core ver 2.11
[ 25.648380] NET: Registered protocol family 31
[ 25.648387] Bluetooth: HCI device and connection manager initialized
[ 25.648393] Bluetooth: HCI socket layer initialized
[ 25.685769] Bluetooth: L2CAP ver 2.9
[ 25.685777] Bluetooth: L2CAP socket layer initialized
[ 25.737570] Bluetooth: RFCOMM socket layer initialized
[ 25.737596] Bluetooth: RFCOMM TTY layer initialized
[ 25.737599] Bluetooth: RFCOMM ver 1.8
[ 28.103833] [drm] Initialized drm 1.1.0 20060810
[ 28.127609] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.127894] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 29.325167] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 29.325199] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 29.325222] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[ 30.567447] [drm] Setting GART location based on new memory map
[ 30.567447] [drm] Loading R200 Microcode
[ 30.567447] [drm] writeback test succeeded in 1 usecs
[ 32.872021] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
radeon 118912 2
drm 65192 3 radeon
rfcomm 28272 0
l2cap 17248 5 rfcomm
bluetooth 44868 4 rfcomm,l2cap
ppdev 6500 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235364 18
acpi_cpufreq 6796 0
speedstep_lib 4516 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 0
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
ext2 54504 1
loop 12748 0
joydev 8480 0
pcmcia 29548 0
firmware_class 6816 1 pcmcia
snd_atiixp_modem 10856 0
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_atiixp 14060 3
snd_ac97_codec 88484 2 snd_atiixp_modem,snd_atiixp
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62596 4 snd_atiixp_modem,snd_pcm_oss,snd_atiixp,snd_ac97_codec
sg 26964 0
sr_mod 13316 0
snd_seq_dummy 2660 0
cdrom 30176 1 sr_mod
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 4740 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
psmouse 32336 0
snd_rawmidi 18528 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 2432 0
snd 45604 17 snd_atiixp_modem,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_atiixp_modem,snd_atiixp,snd_pcm
video 16432 0
output 2912 1 video
battery 10180 0
container 3456 0
ac 4196 0
button 6096 0
i2c_piix4 7216 0
i2c_core 19828 1 i2c_piix4
shpchp 25528 0
pci_hotplug 23460 1 shpchp
evdev 8000 0
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 2 ext2,ext3
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 11 dm_mirror,dm_log,dm_snapshot
ide_disk 10496 3
ide_pci_generic 3908 0 [permanent]
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
usb_storage 77024 0
atiixp 3396 0 [permanent]
ide_core 96136 3 ide_disk,ide_pci_generic,atiixp
8139cp 16800 0
ata_generic 4676 0
8139too 20320 0
mii 4896 2 8139cp,8139too
ohci1394 24944 0
ieee1394 75800 1 ohci1394
libata 140416 1 ata_generic
scsi_mod 129324 4 sg,sr_mod,usb_storage,libata
dock 8304 1 libata
ehci_hcd 28396 0
ohci_hcd 18500 0
usbcore 118224 5 usbhid,usb_storage,ehci_hcd,ohci_hcd
ati_agp 6220 1
agpgart 28776 2 drm,ati_agp
thermal 15228 0
processor 32544 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS300 Host Bridge [1002:5831] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: agpgart-ati
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge [1002:5838] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8001000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 17)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8060 [size=16]
Region 1: Memory at e8004000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8070 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller [1002:4342] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=68
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e8200000-e82fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341]
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8004400 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: ATI IXP AC97 controller
Kernel modules: snd-atiixp
00:14.6 Modem [0703]: ATI Technologies Inc IXP AC'97 Modem [1002:434d] (rev 01) (prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems Device [1179:0001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8004800 (32-bit, non-prefetchable) [size=256]
Kernel modules: snd-atiixp-modem
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] [1002:5835] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8204000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e8204800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
02:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8205000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 34000000-343ff000 (prefetchable)
Memory window 1: 30000000-33fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
-- System Information:
Debian Release: 5.0.2
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=ru_UA.UTF-8, LC_CTYPE=ru_UA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-in 0.93.2~bpo50+2 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01)
00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01)
00:14.0 SMBus: ATI Technologies Inc SMBus (rev 17)
00:14.1 IDE interface: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc Device 434c
00:14.4 PCI bridge: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 15:39:35 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf60000 (usable)
[ 0.000000] BIOS-e820: 000000001bf60000 - 000000001bf6d000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf6d000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f6700] 000f6700
[ 0.000000] Entering add_active_range(0, 0, 114528) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114528
[ 0.000000] HighMem 114528 -> 114528
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114528
[ 0.000000] On node 0 totalpages: 114528
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109569 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1BF68101, 0038 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1BF6CF32, 0074 (r1 TOSCPL Chinook 6040000 ATI 3)
[ 0.000000] ACPI: DSDT 1BF689B5, 457D (r1 TOSCPL SB200 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BF7FFC0, 0040
[ 0.000000] ACPI: APIC 1BF6CFA6, 005A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 1BF68540, 032B (r1 PmRef Cpu0Ist 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1BF68334, 020C (r1 PmRef Cpu0Cst 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 1BF68139, 01FB (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113633
[ 0.000000] Kernel command line: root=/dev/mapper/messenger_main-root ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1600.141 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 442948k/458112k available (1769k kernel code, 14644k reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbf60000 ( 447 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba5eb - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba5eb (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084163] Calibrating delay using timer specific routine.. 3204.15 BogoMIPS (lpj=6408304)
[ 0.084228] Security Framework initialized
[ 0.084236] SELinux: Disabled at boot.
[ 0.084243] Capability LSM initialized
[ 0.084270] Mount-cache hash table entries: 512
[ 0.084532] Initializing cgroup subsys ns
[ 0.084540] Initializing cgroup subsys cpuacct
[ 0.084545] Initializing cgroup subsys devices
[ 0.084580] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.084586] CPU: L2 cache: 512K
[ 0.084590] CPU: Hyper-Threading is disabled
[ 0.084596] Intel machine check architecture supported.
[ 0.084606] Intel machine check reporting enabled on CPU#0.
[ 0.084611] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.084618] CPU0: Thermal monitoring enabled
[ 0.084643] Checking 'hlt' instruction... OK.
[ 0.100634] SMP alternatives: switching to UP code
[ 0.115372] Freeing SMP alternatives: 16k freed
[ 0.115380] ACPI: Core revision 20080321
[ 0.134264] ENABLING IO-APIC IRQs
[ 0.134458] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.136008] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.136008] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 0.136008] ...trying to set up timer as Virtual Wire IRQ... works.
[ 0.177927] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[ 0.180011] Brought up 1 CPUs
[ 0.180011] Total of 1 processors activated (3204.15 BogoMIPS).
[ 0.180011] CPU0 attaching sched-domain:
[ 0.180011] domain 0: span 0
[ 0.180011] groups: 0
[ 0.180011] net_namespace: 660 bytes
[ 0.180011] Booting paravirtualized kernel on bare hardware
[ 0.180011] NET: Registered protocol family 16
[ 0.180011] ACPI: bus type pci registered
[ 0.264016] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[ 0.264016] PCI: Using configuration type 1 for base access
[ 0.264016] Setting up standard PCI resources
[ 0.268801] ACPI: EC: Look up EC in DSDT
[ 0.273414] ACPI: Interpreter enabled
[ 0.273422] ACPI: (supports S0 S3 S4 S5)
[ 0.273448] ACPI: Using IOAPIC for interrupt routing
[ 0.317701] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 0.317707] ACPI: EC: driver started in poll mode
[ 0.317791] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.318710] PCI: Transparent bridge - 0000:00:14.4
[ 0.318758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.318986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.319233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.322585] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[ 0.322777] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[ 0.322965] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[ 0.323151] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[ 0.323574] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.323635] pnp: PnP ACPI init
[ 0.323651] ACPI: bus type pnp registered
[ 0.348208] pnp: PnP ACPI: found 9 devices
[ 0.348215] ACPI: ACPI bus type pnp unregistered
[ 0.348221] PnPBIOS: Disabled by ACPI PNP
[ 0.348725] PCI: Using ACPI for IRQ routing
[ 0.349008] ACPI: RTC can wake from S4
[ 0.349065] system 00:07: ioport range 0x1080-0x1080 has been reserved
[ 0.349071] system 00:07: ioport range 0x200-0x20f has been reserved
[ 0.349076] system 00:07: ioport range 0x220-0x22f has been reserved
[ 0.349080] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.349085] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.349089] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.349094] system 00:07: ioport range 0x530-0x537 has been reserved
[ 0.349099] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.349103] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.349111] system 00:07: ioport range 0xc50-0xc52 has been reserved
[ 0.349115] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.349120] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.349125] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.349130] system 00:07: ioport range 0x8000-0x805f has been reserved
[ 0.349135] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[ 0.349140] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
[ 0.349153] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 0.349159] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
[ 0.349164] system 00:08: iomem range 0x100000-0x1bffffff could not be reserved
[ 0.349170] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.349175] system 00:08: iomem range 0xe8000000-0xe8000fff has been reserved
[ 0.379898] PCI: region 0000:02:04.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.379911] PCI: Bridge: 0000:00:01.0
[ 0.379916] IO window: 9000-9fff
[ 0.379922] MEM window: 0xe8100000-0xe81fffff
[ 0.379928] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.379942] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 0.379945] IO window: 0x0000a400-0x0000a4ff
[ 0.379952] IO window: 0x0000a800-0x0000a8ff
[ 0.379958] MEM window: 0x30000000-0x33ffffff
[ 0.379964] PCI: Bridge: 0000:00:14.4
[ 0.379968] IO window: a000-afff
[ 0.379974] MEM window: 0xe8200000-0xe82fffff
[ 0.379978] PREFETCH window: disabled.
[ 0.380034] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.380084] NET: Registered protocol family 2
[ 0.380266] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.380621] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.380751] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.380877] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.380883] TCP reno registered
[ 0.381013] NET: Registered protocol family 1
[ 0.381222] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 0.899701] it is
[ 1.483804] Freeing initrd memory: 7356k freed
[ 1.485005] audit: initializing netlink socket (disabled)
[ 1.485035] type=2000 audit(1245532913.484:1): initialized
[ 1.485237] Total HugeTLB memory allocated, 0
[ 1.485355] VFS: Disk quotas dquot_6.5.1
[ 1.485403] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.485467] msgmni has been set to 879
[ 1.485655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.485662] io scheduler noop registered
[ 1.485665] io scheduler anticipatory registered
[ 1.485669] io scheduler deadline registered
[ 1.485689] io scheduler cfq registered (default)
[ 2.014435] pci 0000:01:05.0: Boot video device
[ 2.015045] isapnp: Scanning for PnP cards...
[ 2.366284] isapnp: No Plug & Play device found
[ 2.370961] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.371673] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.371684] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 2.374223] brd: module loaded
[ 2.374397] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.387438] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.395042] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.395051] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.395056] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.395063] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.395067] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.395359] mice: PS/2 mouse device common for all mice
[ 2.395850] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.395870] rtc0: alarms up to one day
[ 2.395933] cpuidle: using governor ladder
[ 2.395938] cpuidle: using governor menu
[ 2.395947] No iBFT detected.
[ 2.396730] TCP cubic registered
[ 2.396736] NET: Registered protocol family 17
[ 2.396748] Using IPI No-Shortcut mode
[ 2.396766] registered taskstats version 1
[ 2.396766] rtc_cmos 00:03: setting system clock to 2009-06-20 21:21:55 UTC (1245532915)
[ 2.396766] Freeing unused kernel memory: 244k freed
[ 2.430996] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.593975] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.594065] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.594073] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.214114] usbcore: registered new interface driver usbfs
[ 3.214169] usbcore: registered new interface driver hub
[ 3.214230] usbcore: registered new device driver usb
[ 3.222394] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.222440] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.222465] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.222661] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 3.222697] ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
[ 3.226873] Linux agpgart interface v0.103
[ 3.280190] usb usb1: configuration #1 chosen from 1 choice
[ 3.280248] hub 1-0:1.0: USB hub found
[ 3.280268] hub 1-0:1.0: 3 ports detected
[ 3.384257] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.384265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.384271] usb usb1: Product: OHCI Host Controller
[ 3.384275] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 3.384279] usb usb1: SerialNumber: 0000:00:13.0
[ 3.384327] agpgart: Detected Ati IGP9100/M chipset
[ 3.387614] agpgart: AGP aperture is 32M @ 0xea000000
[ 3.387665] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.387683] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.387727] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 3.387764] ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
[ 3.444187] usb usb2: configuration #1 chosen from 1 choice
[ 3.444249] hub 2-0:1.0: USB hub found
[ 3.444265] hub 2-0:1.0: 3 ports detected
[ 3.548240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.548248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.548253] usb usb2: Product: OHCI Host Controller
[ 3.548256] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 3.548260] usb usb2: SerialNumber: 0000:00:13.1
[ 3.548416] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.548447] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.548494] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.548552] ehci_hcd 0000:00:13.2: irq 19, io mem 0xe8003000
[ 3.688050] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 3.700070] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.700228] usb usb3: configuration #1 chosen from 1 choice
[ 3.700283] hub 3-0:1.0: USB hub found
[ 3.700302] hub 3-0:1.0: 6 ports detected
[ 3.756061] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 3.791972] No dock devices found.
[ 3.806424] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.806432] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.806437] usb usb3: Product: EHCI Host Controller
[ 3.806441] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 3.806445] usb usb3: SerialNumber: 0000:00:13.2
[ 3.880552] SCSI subsystem initialized
[ 3.991611] libata version 3.00 loaded.
[ 4.076903] Uniform Multi-Platform E-IDE driver
[ 4.076914] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.089232] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.139116] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8204000-e82047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.143148] 8139too Fast Ethernet driver 0.9.28
[ 4.253009] ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1
[ 4.253026] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.253043] ATIIXP: not 100% native mode: will probe irqs later
[ 4.253057] ide0: BM-DMA at 0x8070-0x8077
[ 4.253068] ide1: BM-DMA at 0x8078-0x807f
[ 4.253076] Probing IDE interface ide0...
[ 4.262179] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 4.263125] eth0: RealTek RTL8139 at 0xa000, 00:02:3f:d2:04:bf, IRQ 19
[ 4.263130] eth0: Identified 8139 chip type 'RTL-8101'
[ 4.268452] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.468061] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 4.539578] Marking TSC unstable due to: TSC halts in idle.
[ 4.540241] hda: SAMSUNG HM160HC, ATA DISK drive
[ 4.733091] usb 3-3: configuration #1 chosen from 1 choice
[ 4.733091] usb 3-3: New USB device found, idVendor=067b, idProduct=3507
[ 4.733091] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.733091] usb 3-3: Product: ATAPI-6 Bridge Controller
[ 4.733091] usb 3-3: Manufacturer: Prolific Technology Inc.
[ 4.733091] usb 3-3: SerialNumber: 261E
[ 4.776586] Initializing USB Mass Storage driver...
[ 5.036032] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 5.212114] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.212195] hda: UDMA/100 mode selected
[ 5.212271] Probing IDE interface ide1...
[ 5.250590] usb 1-2: configuration #1 chosen from 1 choice
[ 5.252920] usb 1-2: New USB device found, idVendor=04d9, idProduct=1133
[ 5.252928] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.253150] scsi0 : SCSI emulation for USB Mass Storage devices
[ 5.253331] usbcore: registered new interface driver usb-storage
[ 5.253338] USB Mass Storage support registered.
[ 5.257409] usb-storage: device found at 3
[ 5.257415] usb-storage: waiting for device to settle before scanning
[ 5.330566] usbcore: registered new interface driver hiddev
[ 5.342584] input: HID 04d9:1133 as /class/input/input1
[ 5.342584] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:13.0-2
[ 5.342584] usbcore: registered new interface driver usbhid
[ 5.342584] usbhid: v2.6:USB HID core driver
[ 5.524242] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f414b001588]
[ 5.780126] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.798226] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.845589] hda: max request size: 512KiB
[ 5.847618] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 5.849344] hda: cache flushes supported
[ 5.849344] hda: hda1 hda2 hda3
[ 6.161455] device-mapper: uevent: version 1.0.3
[ 6.163553] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.433971] PM: Starting manual resume from disk
[ 6.487230] kjournald starting. Commit interval 5 seconds
[ 6.487230] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.111065] udevd version 125 started
[ 10.256259] usb-storage: device scan complete
[ 10.257971] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB01 PQ: 0 ANSI: 0
[ 10.440036] Driver 'sr' needs updating - please use bus_type methods
[ 10.444970] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.444981] Uniform CD-ROM driver Revision: 3.20
[ 10.445157] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 10.518700] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 86.717024] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 86.736128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 87.055158] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 87.840056] input: Power Button (FF) as /class/input/input2
[ 87.869253] ACPI: Power Button (FF) [PWRF]
[ 87.869375] input: Lid Switch as /class/input/input3
[ 87.882347] ACPI: Lid Switch [LID]
[ 87.882476] input: Power Button (CM) as /class/input/input4
[ 87.909746] ACPI: Power Button (CM) [PWRB]
[ 87.950103] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 87.972854] ACPI: AC Adapter [ACAD] (on-line)
[ 88.696327] ACPI: Battery Slot [BAT1] (battery present)
[ 88.990017] input: Video Bus as /class/input/input5
[ 89.018539] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 89.266752] input: PC Speaker as /class/input/input6
[ 89.956706] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
[ 89.956734] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 89.956739] IO window: 0x0000a400-0x0000a4ff
[ 89.956745] IO window: 0x0000a800-0x0000a8ff
[ 89.956752] PREFETCH window: 0x34000000-0x343fffff
[ 89.956759] MEM window: 0x30000000-0x33ffffff
[ 89.956771] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 89.956774] Yenta: Routing CardBus interrupts to PCI
[ 89.956782] Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44
[ 90.066214] input: PS/2 Mouse as /class/input/input7
[ 90.112762] input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
[ 90.188908] Yenta: ISA IRQ mask 0x0eb0, PCI irq 16
[ 90.188916] Socket status: 30000006
[ 90.188923] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 90.188928] cs: IO port probe 0xa000-0xafff: clean.
[ 90.189328] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 90.529228] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 90.530276] atiixp: codec reset timeout
[ 90.702196] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 90.708608] atiixp-modem: no codec available
[ 90.708704] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 91.328018] cs: IO port probe 0x100-0x3af: clean.
[ 91.328018] cs: IO port probe 0x3e0-0x4ff: clean.
[ 91.328018] cs: IO port probe 0x820-0x8ff: clean.
[ 91.328018] cs: IO port probe 0xc00-0xcf7: clean.
[ 91.328018] cs: IO port probe 0xa00-0xaff: clean.
[ 92.446723] EXT3 FS on dm-1, internal journal
[ 92.780663] loop: module loaded
[ 94.288329] kjournald starting. Commit interval 5 seconds
[ 94.288488] EXT3 FS on dm-3, internal journal
[ 94.288488] EXT3-fs: mounted filesystem with ordered data mode.
[ 94.355482] Adding 2928632k swap on /dev/mapper/messenger_main-swap. Priority:-1 extents:1 across:2928632k
[ 95.645872] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 98.461501] NET: Registered protocol family 10
[ 98.462214] lo: Disabled Privacy Extensions
[ 98.876032] Clocksource tsc unstable (delta = 142080646 ns)
[ 100.282024] lp: driver loaded but no devices found
[ 100.335157] ppdev: user-space parallel port driver
[ 103.385503] Bluetooth: Core ver 2.11
[ 103.388116] NET: Registered protocol family 31
[ 103.388126] Bluetooth: HCI device and connection manager initialized
[ 103.388133] Bluetooth: HCI socket layer initialized
[ 103.458001] Bluetooth: L2CAP ver 2.9
[ 103.458011] Bluetooth: L2CAP socket layer initialized
[ 103.464877] Bluetooth: RFCOMM socket layer initialized
[ 103.464898] Bluetooth: RFCOMM TTY layer initialized
[ 103.464902] Bluetooth: RFCOMM ver 1.8
[ 106.205323] [drm] Initialized drm 1.1.0 20060810
[ 106.213576] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 106.213852] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 107.419890] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 107.419890] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 107.419890] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[ 108.657725] [drm] Setting GART location based on new memory map
[ 108.657725] [drm] Loading R200 Microcode
[ 108.657725] [drm] writeback test succeeded in 1 usecs
[ 108.860026] eth0: no IPv6 routers present
--- End Message ---