--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: /boot/vmlinux-2.6.32-5-powerpc: Only depth 8bpp works with XGI Volari Z9s card PCA-5612 when using sisfb
- From: Andrew Buckeridge <andrewb@zagam.net>
- Date: Sun, 22 May 2011 16:19:46 +0800
- Message-id: <20110522081946.1913.69454.reportbug@chrp.ab.bgc.com.au>
Package: linux-2.6
Version: 2.6.32-31
Severity: normal
File: /boot/vmlinux-2.6.32-5-powerpc
If a depth other than 8 bit is chosen colours are not mapped properly.
The text on the virtual console is not white. The same happens when
X.org is started.
The virtual console is functional at 8 bpp (appart from the DVI port),
but if I force depth with the X server with -- -depth 16, 24 or 32 I get
the same problem.
Many X apps are no longer functional with 256 colours. However, 16 bpp
should be adequate. (i.e. 1400x1050x16 similar to vesa mode 0x0348)
Also the DVI port on the PCA-5612 card is not active. This should mirror
the CRT output. This may be bug #610710.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-powerpc (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Mon Mar 7 22:49:07 UTC 2011
** Command line:
video=sisfb:mode:1400x1050x8,rate:60 panic=300 root=UUID=39c3b58f-8331-4c14-828b-77eb1c2132df
** Not tainted
** Kernel log:
[ 5.620254] usb usb3: SerialNumber: 0000:00:0c.2
[ 5.634551] usb usb3: configuration #1 chosen from 1 choice
[ 5.647784] hub 3-0:1.0: USB hub found
[ 5.660707] hub 3-0:1.0: 2 ports detected
[ 5.673640] firewire_core: created device fw0: GUID 0011060000004b2f, S400
[ 5.689507] ohci_hcd 0000:00:06.1: OHCI Host Controller
[ 5.734225] ohci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 4
[ 5.779583] ohci_hcd 0000:00:06.1: irq 9, io mem 0x80001000
[ 5.794679] ide-cd driver 5.00
[ 5.809129] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.822181] Uniform CD-ROM driver Revision: 3.20
[ 5.885375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.898898] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.911951] usb usb4: Product: OHCI Host Controller
[ 5.924925] usb usb4: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 5.938112] usb usb4: SerialNumber: 0000:00:06.1
[ 5.954113] usb usb4: configuration #1 chosen from 1 choice
[ 5.967748] hub 4-0:1.0: USB hub found
[ 5.981646] hub 4-0:1.0: 1 port detected
[ 5.995123] uhci_hcd 0000:00:0c.3: enabling device (0000 -> 0001)
[ 6.061666] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 6.101632] uhci_hcd 0000:00:0c.3: UHCI Host Controller
[ 6.121635] uhci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 5
[ 6.134638] uhci_hcd 0000:00:0c.3: irq 9, io base 0x00001060
[ 6.147287] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.159729] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.172033] usb usb5: Product: UHCI Host Controller
[ 6.184322] usb usb5: Manufacturer: Linux 2.6.32-5-powerpc uhci_hcd
[ 6.196609] usb usb5: SerialNumber: 0000:00:0c.3
[ 6.211537] usb usb5: configuration #1 chosen from 1 choice
[ 6.224707] hub 5-0:1.0: USB hub found
[ 6.237178] hub 5-0:1.0: 2 ports detected
[ 6.294778] usb 3-2: not running at top speed; connect to a high speed hub
[ 6.340797] usb 3-2: New USB device found, idVendor=03f0, idProduct=3417
[ 6.353363] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.365814] usb 3-2: Product: HP LaserJet 3055
[ 6.378045] usb 3-2: Manufacturer: Hewlett-Packard
[ 6.390165] usb 3-2: SerialNumber: 00CNCK544241
[ 6.404118] usb 3-2: configuration #1 chosen from 1 choice
[ 6.983152] REISERFS (device hda2): found reiserfs format "3.6" with standard journal
[ 6.995804] REISERFS (device hda2): using ordered data mode
[ 7.052130] REISERFS (device hda2): journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 7.070240] REISERFS (device hda2): checking transaction log (hda2)
[ 7.126399] REISERFS (device hda2): Using r5 hash to sort names
[ 10.477154] udev[177]: starting version 164
[ 12.891899] vt596_smbus 0000:00:0c.4: Enabling SMBus device
[ 13.010758] parport_pc: VIA 686A/8231 detected
[ 13.010776] parport_pc: probing current configuration
[ 13.010840] parport_pc: Current parallel port base: 0x3BC
[ 13.010917] parport0: PC-style at 0x3bc, irq 7 [PCSPP]
[ 13.155104] parport_pc: VIA parallel port: io=0x3BC, irq=7
[ 13.227399] vt8231 0000:00:0c.4: enabling sensors
[ 13.368092] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3417
[ 13.415621] usbcore: registered new interface driver usblp
[ 14.000388] VIA 82xx Modem 0000:00:0c.6: enabling device (0000 -> 0001)
[ 15.289715] VIA 82xx Modem: probe of 0000:00:0c.6 failed with error -13
[ 15.315623] VIA 82xx Audio 0000:00:0c.5: enabling device (0000 -> 0001)
[ 18.439948] Adding 2096472k swap on /dev/hda5. Priority:-1 extents:1 across:2096472k
[ 21.545262] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.617170] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.956728] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.102350] oprofile: using ppc/7450 performance monitoring.
[ 22.182589] usbcore: registered new interface driver usbserial
[ 22.205138] USB Serial support registered for generic
[ 22.227144] usbcore: registered new interface driver usbserial_generic
[ 22.248563] usbserial: USB Serial Driver core
[ 22.298595] USB Serial support registered for Handspring Visor / Palm OS
[ 22.322177] USB Serial support registered for Sony Clie 3.5
[ 22.343641] USB Serial support registered for Sony Clie 5.0
[ 22.364287] usbcore: registered new interface driver visor
[ 22.383859] visor: USB HandSpring Visor / Palm OS driver
[ 22.443180] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
[ 22.495038] i2c /dev entries driver
[ 22.634104] Initializing USB Mass Storage driver...
[ 22.653800] usbcore: registered new interface driver usb-storage
[ 22.673588] USB Mass Storage support registered.
[ 23.403541] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 23.587737] REISERFS (device hda4): found reiserfs format "3.6" with standard journal
[ 23.605083] REISERFS (device hda4): using ordered data mode
[ 23.643853] REISERFS (device hda4): journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 23.665861] REISERFS (device hda4): checking transaction log (hda4)
[ 23.737168] REISERFS (device hda4): Using r5 hash to sort names
[ 27.485882] fuse init (API version 7.13)
[ 34.196080] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.872215] Bluetooth: Core ver 2.15
[ 35.890976] NET: Registered protocol family 31
[ 35.905802] Bluetooth: HCI device and connection manager initialized
[ 35.919069] Bluetooth: HCI socket layer initialized
[ 36.068322] Bluetooth: L2CAP ver 2.14
[ 36.081354] Bluetooth: L2CAP socket layer initialized
[ 36.292523] Bluetooth: RFCOMM TTY layer initialized
[ 36.306461] Bluetooth: RFCOMM socket layer initialized
[ 36.319137] Bluetooth: RFCOMM ver 1.11
[ 36.414798] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.427666] Bluetooth: BNEP filters: protocol multicast
[ 36.599420] Bridge firewalling registered
[ 36.641455] eth1: no IPv6 routers present
[ 36.677348] Bluetooth: SCO (Voice Link) ver 0.6
[ 36.690137] Bluetooth: SCO socket layer initialized
[ 39.850469] lp0: using parport0 (interrupt-driven).
** Model information
revision : 1.1 (pvr 8002 0101)
platform : CHRP
model : Pegasos2
machine : CHRP Pegasos2
** Loaded modules:
Module Size Used by
cpufreq_powersave 4138 0
cpufreq_stats 5840 0
cpufreq_userspace 5156 0
cpufreq_ondemand 10789 0
cpufreq_conservative 8952 0
lp 10975 0
sco 11560 2
bridge 48915 0
stp 4885 1 bridge
bnep 13750 2
rfcomm 37798 0
l2cap 32868 4 bnep,rfcomm
bluetooth 52362 6 sco,bnep,rfcomm,l2cap
rfkill 17994 2 bluetooth
xt_tcpudp 5511 17
iptable_filter 5502 1
ip_tables 13570 1 iptable_filter
x_tables 14599 2 xt_tcpudp,ip_tables
fuse 58259 1
ext2 66477 1
hid 68441 0
usb_storage 40810 0
snd_i2c 7322 0
binfmt_misc 10371 1
i2c_dev 8978 0
softdog 6508 0
visor 15864 0
usbserial 32399 1 visor
oprofile 22961 0
sr_mod 17530 0
serio_raw 7592 0
psmouse 49689 0
atkbd 18118 0
libps2 7343 2 psmouse,atkbd
i8042 14431 1 libps2
serio 13364 6 serio_raw,psmouse,atkbd,i8042
snd_via82xx 25172 0
gameport 11244 1 snd_via82xx
snd_via82xx_modem 13464 0
snd_ac97_codec 96350 2 snd_via82xx,snd_via82xx_modem
snd_mpu401_uart 9275 1 snd_via82xx
ac97_bus 4334 1 snd_ac97_codec
snd_pcm_oss 42143 0
snd_mixer_oss 19030 1 snd_pcm_oss
snd_pcm 65033 4 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 8216 0
snd_rawmidi 21199 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 7956 1 snd_seq_midi
snd_seq 51409 2 snd_seq_midi,snd_seq_midi_event
snd_timer 20956 2 snd_pcm,snd_seq
usblp 13711 0
snd_seq_device 8405 3 snd_seq_midi,snd_rawmidi,snd_seq
vt8231 16398 0
snd 52651 12 snd_i2c,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 28780 1
snd_page_alloc 9045 3 snd_via82xx,snd_via82xx_modem,snd_pcm
soundcore 8003 1 snd
i2c_viapro 10015 0
evdev 11760 1
parport 32295 2 lp,parport_pc
reiserfs 247283 2
ext4 320119 0
mbcache 8286 2 ext2,ext4
jbd2 70877 1 ext4
crc16 4475 2 l2cap,ext4
ide_cd_mod 28561 0
cdrom 36699 2 sr_mod,ide_cd_mod
ata_generic 5999 0
libata 143140 1 ata_generic
scsi_mod 126886 3 usb_storage,sr_mod,libata
uhci_hcd 27648 0
ohci_hcd 35383 0
ide_pci_generic 5576 0
marvell 7707 0
mv643xx_eth 28980 0
firewire_ohci 26160 0
libphy 19550 2 marvell,mv643xx_eth
ehci_hcd 44244 0
inet_lro 8410 1 mv643xx_eth
firewire_core 44226 1 firewire_ohci
via_rhine 22697 0
usbcore 132295 8 usb_storage,visor,usbserial,usblp,uhci_hcd,ohci_hcd,ehci_hcd
via82cxxx 8134 4
crc_itu_t 4495 1 firewire_core
nls_base 8693 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
mapping eth1
script grep
map eth1
auto eth1
allow-hotplug eth1
iface eth1 inet static
address 10.254.0.3
netmask 255.255.255.0
network 10.254.0.0
broadcast 10.254.0.255
gateway 10.254.0.128
pre-up /sbin/ethtool -s eth1 speed 10 duplex full autoneg off
iface eth0 inet static
address 10.254.0.130
netmask 255.255.255.0
network 10.254.0.0
broadcast 10.254.0.255
up /sbin/route add -host 10.254.0.160 dev eth0 \
&& /sbin/route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.254.0.160 dev eth0 \
&& /sbin/route del -net 10.254.0.0 netmask 255.255.255.0 dev eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:0b:2f:6b:e4:87 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:0b:2f:74:9c:c1 brd ff:ff:ff:ff:ff:ff
inet 10.254.0.3/24 brd 10.254.0.255 scope global eth1
inet6 fe80::20b:2fff:fe74:9cc1/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 36:99:89:d5:6e:63 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 21404 136 0 0 0 0 0 0 21404 136 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 210119 599 0 0 0 0 0 0 56915 634 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
709 total packets received
0 forwarded
0 incoming packets discarded
709 incoming packets delivered
713 requests sent out
Icmp:
11 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 11
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 11
IcmpMsg:
InType3: 11
OutType3: 11
Tcp:
11 active connections openings
1 passive connection openings
1 failed connection attempts
0 connection resets received
0 connections established
164 segments received
171 segments send out
2 segments retransmited
0 bad segments received.
7 resets sent
Udp:
474 packets received
10 packets to unknown port received.
0 packet receive errors
527 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
2 delayed acks sent
44 packet headers predicted
23 acknowledgments not containing data payload received
2 other TCP timeouts
IpExt:
InMcastPkts: 20
OutMcastPkts: 17
InBcastPkts: 50
InOctets: 222845
OutOctets: 65468
InMcastOctets: 3493
OutMcastOctets: 2709
InBcastOctets: 4202
*** Device features:
eth0: 0x803
eth1: 0x0
lo: 0x13865
pan0: 0xff3865
** PCI devices:
0000:00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
0000:00:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (8000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80002000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 1080 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0000:00:06.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0000:00:06.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 80001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0000:00:06.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [0ee4:3383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 9
Region 0: Memory at 80002800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
0000:00:07.0 VGA compatible controller [0300]: XGI Technology Inc. (eXtreme Graphics Innovation) Z7/Z9 (XG20 core) [18ca:0020] (prog-if 00 [VGA controller])
Subsystem: XGI Technology Inc. (eXtreme Graphics Innovation) Z7/Z9 (XG20 core) [18ca:0020]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
BIST result: 00
Region 0: Memory at 84000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at 80040000 (32-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 1100 [size=128]
Expansion ROM at 80008000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sisfb
0000:00:0c.0 ISA bridge [0601]: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] [1106:8231] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: parport_pc
0000:00:0c.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 14
Region 0: [virtual] I/O ports at 1000 [size=8]
Region 1: [virtual] I/O ports at 100c [size=4]
Region 2: [virtual] I/O ports at 1010 [size=8]
Region 3: [virtual] I/O ports at 101c [size=4]
Region 4: I/O ports at 1020 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
0000:00:0c.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.4 Bridge [0680]: VIA Technologies, Inc. VT8235 ACPI [1106:8235] (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
0000:00:0c.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 40)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1200 [size=256]
Region 1: I/O ports at 1030 [size=4]
Region 2: I/O ports at 1034 [size=4]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
0000:00:0c.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 20)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1300 [size=256]
Capabilities: <access denied>
0000:00:0d.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 51)
Subsystem: Device [3065:1106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at 80002900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
0001:01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:3417 Hewlett-Packard LaserJet 3055
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.32-5-powerpc
Locale: LANG=en_AU, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-powerpc depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-powerpc recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-powerpc suggests:
ii linux-doc-2.6.32 2.6.32-31 Linux kernel specific documentatio
ii mkvmlinuz 35 create a kernel to boot a PowerPC
Versions of packages linux-image-2.6.32-5-powerpc is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---