--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: problems with hdparm and udev during boot
- From: Remigiusz Świc <remigiusz.swic@gmail.com>
- Date: Wed, 4 Jan 2006 00:15:29 +0100
- Message-id: <ffe9b7720601031515j3ab16ff7i403ea08377bebd5a@mail.gmail.com>
Package: hdparm
Version: 6.3-3
Severity: grave
During boot I see errors in dmesg. I've done little investigation
and found that is not problem with my hard drive, but only with
hdparm which is starting by udev.
Errors look like that and I find them only at start of udev:
hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
DataRequest }
ide: failed opcode was: unknown
hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
DataRequest }
ide: failed opcode was: unknown
When I comment out options of hdparm in /etc/hdparm.conf errors just
disappeared.
On newsgroups I have found post whith the same problem as mine -
http://miniurl.org/1m2 (only in polish). But author wrote that he
had lost his data. I didn't experience that problem.
Can you look at this closer?
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.14.4_dópa
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Versions of packages hdparm depends on:
ii libc6 2.3.5-9 GNU C Library: Shared libraries an
ii lsb-base 3.0-13 Linux Standard Base 3.0 init scrip
hdparm recommends no packages.
-- no debconf information
--- End Message ---