Problema con scheda di rete Intel Corporation 82579V Gigabit Network
modulo caricato solo al secondo avvio del pc. per poter utilizzare
internet, insomma, devo ogni volta riavviare il pc. (indizio: lo stesso
problema anche con windows 7 su altro disco - qui sto su debian 9
stabile). problema hardware? bugs? che fare? vi ringrazio
anticipatamente
primo avvio:
alessandro@debian:~$ lspci -k
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network
Connection (rev 04)
Subsystem: Intel Corporation 82579V Gigabit Network Connection
Kernel modules: e1000e
root@debian:/home/alessandro# dmesg | grep e1000e
[ 0.958787] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.958788] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.959108] e1000e 0000:00:19.0: Interrupt Throttling Rate
(ints/sec) set to dynamic conservative mode
[ 1.990130] e1000e: probe of 0000:00:19.0 failed with error -3
riavvio:
alessandro@debian:~$ lspci -k
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network
Connection (rev 04)
Subsystem: Intel Corporation 82579V Gigabit Network Connection
Kernel driver in use: e1000e
Kernel modules: e1000e
root@debian:/home/alessandro# dmesg | grep e1000e
[ 0.767622] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.767622] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.767824] e1000e 0000:00:19.0: Interrupt Throttling Rate
(ints/sec) set to dynamic conservative mode
[ 0.913101] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized):
registered PHC clock
[ 1.043053] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
00:22:4d:80:c1:f6
[ 1.043054] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 1.043096] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
FFFFFF-0FF
[ 1.043958] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 8.038352] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 8.038357] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
Reply to: