Re: gestione temperatura notebook - spegnimento improvviso
Il 09/07/2013 12:11, Giovanni Bellonio ha scritto:
> cercando di risolvere il problema di surriscaldamento del notebook ho
> installato lm-sensors, sensord, sensors-applet e xsensors (installazioni
> terminate senza alcun problema), poi ho installato fancontrol la cui
> installazione però è terminata con il messaggio
>
> Not starting fancontrol; run pwmconfig first. ...
>
> warning che leggo in fase di avvio del computer; eseguendo pwdconfig
> ottengo:
>
> # pwmconfig revision 5857 (2010-08-22)
> This program will search your sensors for pulse width modulation (pwm)
> controls, and test each one to see if it controls a fan on
> your motherboard. Note that many motherboards do not have pwm
> circuitry installed, even if your sensor chip supports pwm.
>
> We will attempt to briefly stop each fan using the pwm controls.
> The program will attempt to restore each fan to full speed
> after testing. However, it is ** very important ** that you
> physically verify that the fans have been to full speed
> after the program has completed.
>
> /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
>
> ho provato ad eseguire sensors-detect che ha individuato
>
> Intel digital thermal sensor... Success!
>
> ed ha terminato suggerendomi di aggiungere le seguenti riga a /etc/modules
>
> # Chip drivers
> coretemp
>
> Inoltre googalando ho trovato anche [1] (anche se relativo a chip
> w83697hf-isa-0290) che suggeriva di aggiungere in /etc/default/grub la
> seguente riga:
>
> GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_enforce_resources=lax"
>
> e quindi eseguire un update-grub per poi riavviare, ma il risultato non
> cambia pwdconfig termina sempre alla stessa maniera.
>
> La mia domanda è la seguente: ma l'"Intel digital thermal sensor" è un
> sensore di tipo pwm?
>
> Grazie per il vostro supporto
>
> Gianni
>
>
>
> [1] http://hydra.geht.net/tino/howto/linux/fixes/w83627hf/
>
Anch'io ho provato ad installare quei pacchetti ed eseguire pwmconfig e
sensor-detect, e mi da' piu' o meno gli stessi errori.
Ciao
Grazie
Reply to: