Re: New install on powerbook 540c
Excellent this worked so far. I downloaded the 2.4 kernel and used the
root.bin from the Debian m68k CD. the screen goes to gray and I see the
kernel coming up. it recognizes the hard drive and the CD rom and then it
goes into some other stuff labeled
NCR5380 Core release =7.
Base addr: 0x00000 io_port: 50f10000 IRQ:19.
NCR5380 coroutine is running.
scsi0: no currently connected command
scsi0: issue_queue
scsi0: disconnected_queue
scsi0: destination target 4, lun 0
command = 18 (0x12)00 00 00 ff 00
I haven't a clue what that means really but it ends there and the mac just
sits. Any idea what it is looking for or how I can remedy this?
Matt
> From: Stephen R Marenka <stephen@marenka.net>
> Date: Sat, 24 Jan 2004 17:40:44 -0600
> To: Matt Polashek <matt@tinysongs.com>
> Cc: debian-68k@lists.debian.org
> Subject: Re: New install on powerbook 540c
> Resent-From: debian-68k@lists.debian.org
> Resent-Date: Sat, 24 Jan 2004 17:41:21 -0600 (CST)
>
> On Sat, Jan 24, 2004 at 05:21:18PM -0500, Matt Polashek wrote:
>> Brad-
>> There seem to be 3 different files associated with a ramdisk with this
>> distro.... driver.bin, rescue.bin, and root.bin. Which should I use? Or
>> are all three of these combined considered the ramdisk?
>
> root.bin.
>
> As per the installation guide, section 5.4.3.
>
> <http://www.debian.org/releases/stable/m68k/ch-rescue-boot.en.html#s-install-d
> rive>
>
> --
> Stephen R. Marenka If life's not fun, you're not doing it right!
> <stephen@marenka.net>
>
Reply to: