Re: What does this error stand for ?
On Wed, Jul 28, 2010 at 03:47:30PM +0200, Joerg Schilling wrote:
Hello,
thank for your answer.
I just followed what cdrecord ask me to do : report the error.
Another media of the same kind gives me :
cdrecord -minfo
Cdrecord-ProDVD-ProBD-Clone 3.00 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=5,0,0.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CDDVDW SH-S223F '
Revision : 'SB03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Mounted media class: DVD
Mounted media type: DVD+R/DL
Disk Is not erasable
data type: standard
disk status: empty
session status: empty
BG format status: none
first track: 1
number of sessions: 1
first track in last sess: 1
last track in last sess: 1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Blank 0 4173823 4173824
Next writable address: 0
Remaining writable size: 4173824
Or dvd+rw-mediainfo /dev/sr0
INQUIRY: [TSSTcorp][CDDVDW SH-S223F ][SB03]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Current Write Speed: 8.0x1385=11080KB/s
Write Speed #0: 8.0x1385=11080KB/s
Write Speed #1: 6.0x1385=8310KB/s
Write Speed #2: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 8.0x1385=11080KB/s@[0 -> 4173824]
Speed Descriptor#0: 00/4173823 R@12.0x1385=16620KB/s W@8.0x1385=11080KB/s
Speed Descriptor#1: 00/4173823 R@12.0x1385=16620KB/s W@6.0x1385=8310KB/s
Speed Descriptor#2: 00/4173823 R@12.0x1385=16620KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Media ID: RICOHJPN/D01
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
"Next" Track: 1
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 4173824*2KB
Track Size: 4173824*2KB
ROM Compatibility LBA: 265696
READ CAPACITY: 0*2048=0
So my burner is a Samsung SH-S223F and the medias are from Prodye.
I don't have hald running here and two medias died in the process, I
tried the third one with growisofs which burns it fine.
Sure my media are cheaps one and it don't mean anthing.
Again I just repported it because of the cdrecord message.
If my repport is of no use just forget about it :-)
Gave a nice day,
> Without any information on HW and media, I asume that either your media is
> cheap junk or that hald or other unfriendly programs did interrupt the write
> process.
--
Grégoire Favre, Chemin de Mallieu 15, 1009 Pully, +41 21 550 61 93
prof -> Gymnase de Chamblandes, Avenue des Désertes 29, 1009 Pully
sip -> 310546@sip.freesip.ch / gsm -> +41 78 765 65 00
http://www.gycham.vd.ch/~greg / netvoip.ch : +41 21 544 77 44
Reply to: