Eric Wanchic wrote:
Thomas
Schmitt wrote:
With program cdrskin these options would do
multi-session resp. leave the media appendable.
cdrskin (i am its author):
http://scdbackup.sourceforge.net/cdrskin_eng.html
Source tarball
http://scdbackup.sourceforge.net/cdrskin-0.4.2.pl00.tar.gz
Installation instructions:
http://scdbackup.sourceforge.net/README_cdrskin
32-bit static x86 binary (if suitable for you):
http://scdbackup.sourceforge.net/cdrskin_0.4.2.pl00-x86-suse9_0-static.tar.gz
As Debian package i would recommend
http://packages.debian.org/sid/cdrskin (What Debian classifies as
"stable" is heavily outdated
and can only burn CD. 0.4.2 is the most stable cdrskin.
Needed for DVD+R is at least cdrskin-0.3.6.)
Have a nice day :)
Thomas
Ok, so now with a compile of
http://scdbackup.sourceforge.net/cdrskin-0.4.2.pl00.tar.gz and an
"ldconfig" ;) things are running!
root@noah:/media/sdc1/raws# cdrskin dev=/dev/scd0 -v padsize=300k
-multi -tao track_01.iso
cdrskin 0.4.2 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 1 burn_disc_blank "The drive holds a blank disc"
Current: DVD+R
Track 01: data 17 MB padsize: 300 KB
Total size: 18 MB (02:05.93) = 9295 sectors
Lout start: 18 MB (02:07/93) = 9295 sectors
Starting to write CD/DVD at speed MAX in real TAO mode for multi
session.
Last chance to quit, starting real write in 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer
ready.
Starting new track at sector: 0
Track 01: 18 of 18 MB written (fifo 100%) [buf 99%] 0.6x.
cdrskin: thank you for being patient since 22 seconds
Fixating...
cdrskin: working post-track (burning since 41 seconds)
Track 01: Total bytes read/written: 18728960/19038208 (9296 sectors).
Writing time: 41.533s
Cdrskin: fifo had 9145 puts and 9145 gets.
Cdrskin: fifo was 0 times empty and 3253 times full, min fill was 99%.
Min drive buffer fill was 99%
cdrskin: burning done
Looks Great ! TAO was executed.
I find this very interesting! The original post noted that only SAO was
supported:
Supported modes: PACKET SAO LAYER_JUMP
so I suspect SAO was used instead, as other software might do. That's
not a complaint, just a note on something which puzzles me. I would
expect the program to note using SAO in place of TAO with verbose
selected.
Thomas, perhaps you can clarify the SAO vs. TAO options and actual
difference in the media. I assume that a session with a single track
will be the same in either mode, but I don't claim to be an expert,
only that I'm familiar with the concepts.
root@noah:/media/sdc1/raws# cdrskin dev=/dev/scd0 -msinfo
cdrskin 0.4.2 : limited cdrecord compatibility wrapper for libburn
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
0,11344
Awesome! However, now I have a new problem. There is nothing on the
disk? I can mount it, but there is nothing there. To touble check and
make sure my track_01.iso was ok, I mounted it too:
mount -o loop track_01.iso /media/cdrom0
track_01.iso was ok. So now I'm tempted to burn another track and close
it for S&Gs since the -msinfo worked, and cdrecord automatically
closed the disc but I could mount and read it. Or maybe there is
something else. So I'm throwing this out hear for direction.
BTW, I will use a new DVD+R everytime, of course (^_-)
--
E. Robert Bogusta
It seemed like a good idea at the time
|