Re: cdrtools-2.01a37 ready
Joerg >
> Just download from
>
> ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
I did, but then encountered some difficulties when
burning CD-RW on the fly via cdrecord's stdin :
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Unlocked features:
Limited features:
...
cdrecord: Must specify track size(s).
It ends with non-zero exit value.
But it works when reading a file from disk rather than stdin.
Next i set the CDR_SECURITY variable and shwoops
my pipe did work. It is reproducible: unset CDR_SECURITY
spoils it again.
Is that restriction intended without CDR_SECURITY ?
I cannot find anything about that in
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/README
Joerg >
> The ProDVD binaries just behave the same as the
> cdrecord compiled from the GPLd part of the source in case you
> do not like to get more functionality than the GPLd source includes.
Did i find a bug ?
To prove i rtfm'ed : probably found some typos
README.key :
"private/nomcommercial"
"A pepliy to the incoming mail is usually send once a week"
README.clone:
"then cdrecord will promise you a different write mode"
Did you probably mean "propose" ? I did not test - but with
"promise" this is a strange statement.
Have a nice day :)
Thomas
----------------------------------------------------------------------------
PS: What i tried :
-rwsr-xr-x 1 root root 340036 Aug 20 20:21 cdrecord-prodvd-2.0.1-i586-pc-linux-gnu
-rwsr-xr-x 1 root root 372956 Aug 20 20:08 cdrecord-prodvd-2.01b31-i686-pc-linux-gnu
Having a symbolic link from cdrecord to one of those binaries, i run :
mkisofs ... | \
cdrecord -v speed=10 dev=0,0,0 \
padsize=300k fs=8m -eject driveropts=burnfree -data -
with 2.01b31, option -tao makes no real difference.
If i switch back to my selfmade binaries or the older
SuSE ones, then it works again.
When feeding cdrecord with a file from disk, then
it works with cdrecord-ProDVD, too.
I never heard of that message together with my software:
"cdrecord: Must specify track size(s)."
I interpret in man cdrecord option -tao (2.01a35)
the absence of sentence
"Note that cdrecord needs to know the size ..."
in such a way that TAO is not supposed to demand
that size. All alternatives to -tao seem to make
this constraint (-sao , -raw , ...).
-------------------------------------------------------------------------
Failed runs :
Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord limits DVD-R/DVD-RW support to -dummy or 1 GB real.
cdrecord: If you need full DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
FIFO size : 8388608 = 8192 KB
Track 01: data unknown length padsize: 300 KB
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
cdrecord: Must specify track size(s).
-----------------------------
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent default
s.
cdrecord: Continuing in 5 seconds...
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: CD-RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW (current)
Profile: CD-ROM
Profile: Removable Disk
cdrecord: This version of cdrecord limits DVD-R/DVD-RW support to -dummy or 1 GB real.
cdrecord: If you need full DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
FIFO size : 8388608 = 8192 KB
Track 01: data unknown length padsize: 300 KB
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
cdrecord: Must specify track size(s).
-------------------------------------------------------------------------
Successful run (with cdrecord reading from disk file):
drecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord limits DVD-R/DVD-RW support to -dummy or 1 GB real.
cdrecord: If you need full DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
FIFO size : 8388608 = 8192 KB
Track 01: data 427 MB padsize: 300 KB
Total size: 491 MB (48:39.32) = 218949 sectors
Lout start: 491 MB (48:41/24) = 218949 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 140900
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
Track 01: 427 of 427 MB written (fifo 100%) [buf 99%] 10.1x.
Track 01: writing 300 KB of pad data.
Track 01: Total bytes read/written: 448096256/448403456 (218947 sectors).
Writing time: 295.622s
Average write speed 9.9x.
Min drive buffer fill was 98%
Fixating...
Fixating time: 28.997s
cdrecord: fifo had 7058 puts and 7058 gets.
cdrecord: fifo was 0 times empty and 6917 times full, min fill was 96%.
-------------------------------------------------------------------------
Successful run (with key):
drecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: CD-RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW (current)
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
FIFO size : 8388608 = 8192 KB
Track 01: data unknown length padsize: 300 KB
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
cdrecord-ProDVD: WARNING: Total disk size unknown. Data may not fit on disk.
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
Track 01: 2 MB written (fifo 100%) [buf 99%] 10.3x. 2.29% done, estimate finish Fri Aug 20 21:33:26 2004
...
Track 01: 419 MB written (fifo 100%) [buf 99%] 10.3x.Total translation table size: 0
Total rockridge attributes bytes: 2211845
Total directory bytes: 4958208
Path table size(bytes): 18886
Max brk space used fd42c4
218804 extents written (427 MB)
Track 01: 427 MB written (fifo 100%) [buf 99%] 10.1x.
Track 01: writing 300 KB of pad data.
Track 01: Total bytes read/written: 448110592/448417792 (218954 sectors).
Writing time: 296.264s
Min drive buffer fill was 99%
Fixating...
Fixating time: 28.832s
cdrecord-ProDVD: fifo had 7060 puts and 7060 gets.
cdrecord-ProDVD: fifo was 0 times empty and 6870 times full, min fill was 96%.
Reply to: