Re: cdrecord-prodvd don't work with BTC 1004
>From: "Marcello V. Mansueto" <torshind@inwind.it>
>bash-2.05b# mkisofs -dvd-video -V TITLE ./ |
>../dvdburn.sh -v dev=3D1,0 tsize=3D2271666s - Cdrecord-ProDVD-Clone 2.01a24
>(i686-pc-linux-gnu) Copyright (C) 1995-2004 J=F6rg Schilling Unlocked
>features: ProDVD Clone Limited features:=20
>This copy of cdrecord is licensed for:
>private/research/educational_non-commercial_use TOC Type: 1 =3D CD-ROM
>scsidev: '1,0'
>scsibus: 0 target: 1 lun: 0
>Linux sg driver version: 3.1.25
>Using libscg version 'schily-0.8'.
>SCSI buffer size: 64512
>atapi: 1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 1
>Vendor_info : 'DVDRW '
>Identifikation : 'IDE1004 '
>Revision : '0048'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: DVD-R sequential recording
>Profile: DVD+R=20
>Profile: DVD+RW=20
>Profile: DVD-RW sequential overwrite=20
>Profile: DVD-RW restricted overwrite=20
>Profile: DVD-R sequential recording (current)
>Profile: DVD-ROM=20
>Profile: CD-RW=20
>Profile: CD-R=20
>Profile: CD-ROM=20
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD MMC-3 SWABAUDIO BURNFREE=20
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
>RAW/R96R Drive buf size : 1376256 =3D 1344 KB
>FIFO size : 4194304 =3D 4096 KB
>Track 01: data 4436 MB =20
>Total size: 4436 MB =3D 2271666 sectors
>Current Secsize: 2048
>Blocks total: 2271666 Blocks current: 2271666 Blocks remaining: 0
>Starting to write CD/DVD at speed 4 in real TAO mode for single session.
>Last chance to quit, starting real write 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is OFF.
>/data/dvd/dvdrecord: Input/output error. reserve_track_rzone: scsi
>sendcmd: no error CDB: 53 00 00 00 00 00 22 A9 B2 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 05 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x72 Qual 0x05 (no more track reservations allowed) Fru 0x0
>Sense flags: Blk 0 (not valid)=20
>cmd finished after 0.000s timeout 100s
>/data/dvd/dvdrecord: Cannot open next track.
Either broken firmware or this medium has already been written to.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: