Re: Error under OSX
>From: Gregoire Favre <Gregoire.Favre@freesurf.ch>
>I just tried to burn a DVD under OSX:
>Cdrecord-ProDVD-Clone 2.01a11 (powerpc-apple-macosx1.4) Copyright (C) 1995-2003 Jörg Schilling
>Unlocked features: ProDVD Clone
>Limited features:
>This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>scsidev: 'IODVDServices'
>devname: 'IODVDServices'
>scsibus: -2 target: -2 lun: -2
>Using libscg version 'schily-0.7'
>cdrecord-prodvd: Warning: using inofficial libscg transport code version (csapuntz-scsi-mac-iokit.c-1.4 '@(#)scsi-mac-iokit.c 1.4 02/10/19 Copyright 1997,2001 J. Schilling').
>atapi: 0
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : 'MATSHITA'
>Identifikation : 'DVD-R UJ-816 '
>Revision : 'DXJ3'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Profile: DVD-RW restricted overwrite
>Profile: DVD-RW sequential overwrite
>Profile: DVD-R sequential recording (current)
>Profile: DVD-ROM
>Profile: CD-RW
>Profile: CD-R
>Profile: CD-ROM
>Profile: Removable Disk
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO
>Drive buf size : 1671168 = 1632 KB
>FIFO size : 67108864 = 65536 KB
>Track 01: data 4472 MB
>Total size: 4472 MB = 2290112 sectors
>Current Secsize: 2048
>WARNING: Phys disk size 1 differs from rzone size 2298496! Prerecorded disk?
>WARNING: Phys start: 196608 Phys end 196608
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 8384
>Starting to write CD/DVD at speed 2 in real SAO mode for single session.
>Last chance to quit, starting real write 8 seconds. 0.22% done, estimate finish Wed Dec 17 21:54:04 2003
> 7 seconds. 0.44% done, estimate finish Wed Dec 17 21:50:15 2003
> 0.66% done, estimate finish Wed Dec 17 21:46:26 2003
> 6 seconds. 0.87% done, estimate finish Wed Dec 17 21:46:26 2003
> 5 seconds. 1.09% done, estimate finish Wed Dec 17 21:46:27 2003
> 4 seconds. 1.31% done, estimate finish Wed Dec 17 21:46:26 2003
> 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is ON.
>Turning BURN-Free off
>Starting new track at sector: 0
>Track 01: 4 of 4472 MB written (fifo 100%) [buf 100%] 1.0x. 1.53% done, estimate finish Wed Dec 17 22:13:42 2003
>Track 01: 14 of 4472 MB written (fifo 100%) [buf 100%] 1.0x. 1.75% done, estimate finish Wed Dec 17 22:16:58 2003
>Track 01: 23 of 4472 MB written (fifo 100%) [buf 100%] 1.0x. 1.97% done, estimate finish Wed Dec 17 22:18:40 2003
>...
>Track 01: 4408 of 4472 MB written (fifo 100%) [buf 100%] 1.0x.100.00% done, estimate finish Wed Dec 17 22:34:50 2003
>Track 01: 4409 of 4472 MB written (fifo 99%) [buf 96%] 0.9x.Total translation table size: 0
>Total rockridge attributes bytes: 0
>Total directory bytes: 4096
>Path table size(bytes): 42
>Max brk space used 0
>2290112 extents written (4472 Mb)
>Track 01: 4429 of 4472 MB written (fifo 100%) [buf 100%] 1.0x.cdrecord-prodvd: Error 0. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 22 9B E0 00 00 10 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: F1 00 04 00 22 98 B0 0A 00 2A 00 00 03 00 00 00 00 00
>Sense Key: 0x4 Hardware Error, deferred error, Segment 0
>Sense Code: 0x03 Qual 0x00 (peripheral device write fault) Fru 0x0
>Sense flags: Blk 2267312 (valid)
>resid: 32768
>cmd finished after 1.574s timeout 100s
If you have problems with the quality of the medium, it helps
a lot of you include a cdrecord -atip output.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: